Professional Documents
Culture Documents
CNC Programming Basics - Test1
CNC Programming Basics - Test1
NO NOTES ALLOWED!
Station 5
Name: ___________________________ Score: __________________
1. Most Lathes control 2 axes. The ______ axis controls cross motion of the cutting
tool.
2. On milling machines the _______ axis controls the vertical movement of the knee or
spindle.
3. Incremental program locations are always given as the distance and direction from
__________________________________.
4. The Y plus (Y+) command will cause the cutting tool to be located ___________
_________________________________ .
5. What are the 2 types of CNC Positioning Systems
A.___________________
B. ___________________
6. What are the 2 most common codes in CNC programming?
____________ and ____________
7. G02 will move the axes clockwise and is used for _______ and __________.
8. M04 does what to the spindle? ____________________________
9.
15. On Fanuc controls the G28 code is used to set the programmed offset of the
_________________________________.
16. What are 2 types of programming modes?
A. _______________________________
B. _______________________________
17. Absolute program locations are always given from
_____________________________________________________.
18. The G00 code does what?
_________________________________________________________________.
19. For turning the code M03 will do what? _______________________________
_____________________________________________________
20. When milling a Z.100 code does what?
____________________________________________________________________.