Professional Documents
Culture Documents
Drawing a basic isometric shape such as cube can be difficult the first time
you attempt to draw it using a T-Square and 30 degree Set Square. However,
after a few attempts the technique for drawing them can be mastered quite
easily. On the other hand - isometric circles and cylinders are more difficult
and drawing them requires practice.
The sequence for drawing both is shown below:
1. Draw the original circle with a compass and enclose it in a box. Add
vertical and horizontal guidelines
2. Number the vertical lines (these are called 'ordinate lines') as shown on the
diagram opposite.
3. Draw the grid in isometric using a 30 degree set square, being careful to
use the same measurements as the original grid which surrounds the circle.