Professional Documents
Culture Documents
,LTD
MG-811
MG811
CO2 Sensor
Features
Good sensitivity and selectivity to CO2
Low humidity and temperature dependency
Long stability and reproducibility
Application
Air Quality Control
Ferment Process Control
Room Temperature CO2 concentration Detection
Figure 1B
Figure 1A
Working Principle
Sensor adopt solid electrolyte cell Princip leIt is composed by the following solid cells
AirAu|NASICON|| carbonate|Au, airCO2
When the sensor exposed to CO2the following electrodes reaction occurs
Cathodic reaction2Li + + CO2 + 1/2O2 + 2e - = Li2CO3
Anodic reaction2Na+ + 1/2O2 + 2e- = Na2O
Overall chemical reactionLi2CO3 + 2Na + = Na2O + 2Li + + CO2
The Electromotive force
EMF result from the above electrode reaction, accord with according to Nernsts equation:
EMF = Ec - (R x T) / (2F) ln (P(CO2 ))
P(CO2 )CO2--- partial Pressure
EcConstant Volume
RGas Constant volume
T Absolute Temperature KFFaraday constant
From Figure 1BSensor Heating voltage supplied from other circuit , When its surface temperature is high enough ,
the sensor equals to a cell, its two sides would output voltage signal ,and its result accord with In
sensor testing, the impedance of amplifier should be within 1001000GIts testing current should be control below
1pA.
Tel: 86 371 5333098 5333099
E-mail: sensor@371.net
MG-811
Specifications
Symbol
VH
Parameter Name
Heating Voltage
RH
IH
Heating Resistor
Heating Current
PH
Tao
Heating Power
Operating Temperature
@1200mW
-2050
Tas
Storage Temperature
Output
-2070
? E??M F
Technical
6.00.1 V
30.05%
Remarks
AC or DC
Room Temperature
@200mA
3050mV
35010000ppmCO2
Sensitivity
Figure 2 Shows gas sensor sensitivity curve.
Conditions:
Tem 28
RH65%
Oxygen 21%
EMF: sensor EMF under different gas and
concentration .
E-mail: sensor@371.net