Professional Documents
Culture Documents
Padrão Templates Eletricos
Padrão Templates Eletricos
CH-1211 Geneva 23
Switzerland
the
Large
Hadron
Collider
103568
project
Date: 2000-07-05
DESIGN STANDARDS
ELECTRICAL SCHEMATIC DIAGRAMS
Abstract
This document provides standards for all electrical schematic diagrams for the LHC and
its detectors. It covers:
! High and low voltage distribution diagrams.
! Relay and automatism diagrams.
! Lighting, power and earth protection diagrams.
! LHC main ring magnets cabling diagrams.
! Cooling and ventilation relay and automatism diagrams.
Prepared by :
Checked by :
Approved by :
Martial Dujardin
ST/EL
Martial.Dujardin@cern.ch
Joaquin Inigo-Golfin
ST/CV
Joaquin.Inigo-Golfin@cern.ch
Paul Faugeras
Deputy to LHC Project
Leader for Quality
Assurance
History of Changes
Rev. No.
Date
Pages
Description of Changes
0.1 draft
2000-05-15
0.2 draft
2000-05-24
1.0
2000-07-05
10
Table of Contents
1.
PURPOSE ............................................................................................. 4
2.
POLICY ................................................................................................ 4
3.
SCOPE.................................................................................................. 4
4.
RESPONSIBILITIES .............................................................................. 4
5.
5.1
5.2
5.3
6.
6.1
6.2
7.
7.1
7.2
8.
8.1
9.
9.1
1. PURPOSE
To provide standards for all electrical schematic diagrams for the Large Hadron
Collider (LHC) and its detectors.
2. POLICY
All electrical schematic diagrams for the LHC project shall be created with a Computer
Aided Design (CAD) system, in accordance with the general quality assurance policy of
the LHC project.
The CAD systems used for electrical schematic diagrams prepared at CERN are
AutoCAD1, the AutoCAD add-on application Alpage-Elec2, and SEE 30002.
All electrical schematic diagrams prepared at CERN, and referenced in a CERN
contractual document, shall incorporate the appropriate CERN title block. The drawing
tittle shall be written in English only or English and French.
All electrical schematics diagrams shall be stored in the CERN Drawing Directory
(CDD) with the relevant descriptive information and identified by a unique drawing
number defined in accordance with the CERN Drawing Directory rules as described in
the CDD Manual[ 1 ]. Diagrams may be stored as Hewlett Packard Graphic Language
(HPGL) plot files and native CAD files or as HPGL plot files only.
All electrical schematic diagrams shall be submitted to a review and approval process
before being released as described in "Drawing Management and Control", [ 2 ].
New versions of released diagrams shall be submitted to the same review and
approval process as the original diagrams.
3. SCOPE
This standard is applicable to:
All electrical schematic diagrams for the LHC and its detectors. This includes:
! High and low voltage distribution schematic diagrams.
! Relay, wiring and automatism schematic diagrams.
! Lighting, power and earth protection schematic diagrams.
! LHC main ring magnets cabling schematic diagrams.
! Cooling and ventilation relay and automatism diagrams.
4. RESPONSIBILITIES
Managers, Supervisors and Project Engineers (PE) at CERN working on the LHC Project
are responsible for:
! Ensuring that designers and draughtsman are aware of and understand the
procedures described in the present document.
! Ensuring that these design standards are fully implemented in their design.
1
2
Vertical
DRAWING NUMBER
As described in chapter 6.
QA CATEGORY
DRAWING SIZE
REVISION INDEX
AUTHOR
DATE
SCALE
DATE
NAME
ZONE
MODIFICATION
6. NUMBERING SCHEMES
The numbering scheme for electrical schematic diagrams is derived from the scheme
in use for LHC drawings. However deviations are introduced to take into account the
specific needs related to electrical diagrams.
A project identification code. For the LHC project the code is LHC
Equipment code:
Zone
Number:
Example:
EQUIPMENT CODE
PROJECT CODE
ZONE
NUMBER
L H C E B L _ _ 5 0 1 4
Note: Equipment codes shorter than 5 chars/digits shall be completed with
underscores (_).
A project identification code. For the LHC project the code is LHC
Sys:
Building
Number:
Example:
PROJECT CODE
SYS
BUILDING
NUMBER
L H C E 2 6 8 4 0 0 0 1
7. ARCHIVING PROCESS
Electrical diagrams are archived in CDD as HPGL plot files. The process is described
below. Native CAD files of ST/CV diagrams are also stored in CDD.
DOPRJ
File name
EQUIP3N.plt
where:
EQUIP:
ZONE:
3N
Example:
The plot file of the drawing LHCEBL___5004 is named EBL5004.plt and stored in the
sub-directory SRV4_DIV\drawings\DRAWINGS\ELEC\HPGL\77LHC\.
Only the last version of the plot file is stored in this directory.
SEE 3000:
The native CAD files are stored on the NICE server SRV3_DIV, in
the directory ST_EL\BE\SEE3000. A sub-directory is created for
each drawing containing all the files related to that drawing.
DOPRJ
File name:
EQUIPNUM.DWG
where:
DOPRJ:
EQUIP:
NUM:
DWG
Example:
The file of the diagram LHCEBL__5004 is named EBL5004.DWG and is stored in the
directory I:\SRV4_DIV\drawings\DRAWINGS\ELEC\77LHC\
EBLDG1N
File name
EBLDG3N.DWG
where:
EBLDG:
1N
3N
DWG
Example:
The diagram numbered LHCE31820004 is stored in the directory:
SRV4_DIV\drawings\DRAWINGS\LHC\E31820\E3182004.DWG
CDD Manual
[ 2 ] LHC-PM-QA-305.00
[ 3 ] LHC-PM-QA-204.00
[ 4 ] LHC-PM-QA-201.00
[ 6 ] TIS IS23
[ 7 ] TIS IS24
[ 8 ] IEC 60617
14. ANNEXES
A.1
A.2
A.3
A.4
A.4