actuator screw can be removed using a shallow 1/4-inch drive swivel-type socket and extension. Working through the glove compartment opening, remove the upper RH temperature blend door actuator screw.
Item
Part Number
Description
W701696
19E616
RH temperature blend door
actuator electrical connector (part of 14401) RH temperature blend door actuator screw (3 required) RH temperature blend door actuator
Removal and Installation
1.
Remove the RH floor console finish panel.
2.
Lower the glove compartment.
3.
Disconnect the RH temperature blend door
actuator electrical connector.
Copyright 2007, Ford Motor Company
Last updated: 5/15/2009
5.
Remove the 2 remaining RH temperature blend
door actuator screws.
6.
Remove the RH temperature blend door
actuator.
7.
To install, reverse the removal procedure.
2008 Explorer, Mountaineer, Explorer Sport Trac, 7/2007