You are on page 1of 2

412-01-1

Climate Control

412-01-1

REMOVAL AND INSTALLATION


Temperature Blend Door Actuator
LH

Item

Part Number

Description

W701696

19E616

LH temperature blend door


actuator electrical connector
(part of 14401)
LH temperature blend door
actuator screw (3 required)
LH temperature blend door
actuator

Copyright 2007, Ford Motor Company


Last updated: 06/21/2007

Removal and Installation


1.

Remove the LH floor console finish panel.

2.

Position the in-vehicle temperature sensor


aspirator hose away from the LH temperature
blend door actuator.

3.

Remove the 3 LH temperature blend door


actuator screws.

4.

Disconnect the LH temperature blend door


actuator electrical connector.

2008 Explorer, Mountaineer, Explorer Sport Trac, 7/2007

412-01-2

Climate Control

412-01-2

REMOVAL AND INSTALLATION (Continued)


5.

Remove the LH temperature blend door


actuator.

6.

To install, reverse the removal procedure.

2008 Explorer, Mountaineer, Explorer Sport Trac, 7/2007

You might also like