The document provides instructions for creating ribbed surface models in 3 steps: 1) Create offset surfaces or adjust ribs using angles to build thickness; 2) Draw lines for ribs and project them onto surfaces; 3) Loft surfaces between intersections of projected lines to create the ribbed structure, then dimension the 2D drawing for printing. Users are warned not to enclose objects with lofts or the model will not project correctly.
The document provides instructions for creating ribbed surface models in 3 steps: 1) Create offset surfaces or adjust ribs using angles to build thickness; 2) Draw lines for ribs and project them onto surfaces; 3) Loft surfaces between intersections of projected lines to create the ribbed structure, then dimension the 2D drawing for printing. Users are warned not to enclose objects with lofts or the model will not project correctly.
The document provides instructions for creating ribbed surface models in 3 steps: 1) Create offset surfaces or adjust ribs using angles to build thickness; 2) Draw lines for ribs and project them onto surfaces; 3) Loft surfaces between intersections of projected lines to create the ribbed structure, then dimension the 2D drawing for printing. Users are warned not to enclose objects with lofts or the model will not project correctly.