Professional Documents
Culture Documents
DTMA900 Datasheet
DTMA900 Datasheet
Issue:02
Product Description
DTMA (Dual Tower Mounted Amplifier) is both main and diversity branch
and fits with cross-polarization antennas. DTMA is installed near the antenna at
the tower top to improve receiver sensitivity of the base station. The usage of
DTMA will result in an increase of successful call attempts, reduction of call
drops, maximized data transmission rate, improved call quality and extended
handset talk time.
Features
High linearity and low noise performance .
Balanced LNA design and power failure bypass for high reliability .
Light weight and compact design .
Wall mounting and mast mounting .
Built-in lightning protection .
Support AISG1.1 or AISG2.0 protocol .
Technical Specifications
Specification
Item
Tx Specifications
Frequency range
935960MHz
Bandwidth
25MHz
Insertion loss
0.6dB(Full temperature)
Return loss
18dB
Tx-Rx rejection
45dB
<40ns@5MHz
Input power
Rx Specifications
Frequency range
890MHz 915MHz
Bandwidth
25MHz
Return loss
2.2 dB
Gain
121 dB
Gain ripple
1.0 dB
Noise figure
Typ. 1.4 dB
12 dBm
OIP3
25 dBm
<40ns@5MHz
75 dB
55 dB
Electrical Specifications
CWA Mode
DC supply voltage
9V15V
340mA 760mA
Power consumption
<5W
AISG Mode
9V30V
50mA470mA
AISG
Environmental Specification
Operating temperature range
-40+65
IP rating
IP67
MTBF
>1000000h
EMC
Lightning protection
10kA (8/20us)
Mechanical Specification
Mounting
47/16 female
8-pin female, IEC 60130-9(Pin 3: RS485B, pin 5: RS485A, pin 6: 9V
30 V DC,pin 7: DC return, other pins: not connected)
Wall mounting/Mast mounting
Weight
5.6kg(with brackets)
Mast diameter
30mm125mm
Dimensions(HWD)
RF connectors
AISG connector
Mechanical
Address: Huawei Technologies, Bantian Base, Longgang District, Shenzhen 518129 P.R.China.