Professional Documents
Culture Documents
Adre SXP / 408 Dspi: Description
Adre SXP / 408 Dspi: Description
Description
ADRE Sxp Software and the 408 DSPi (Dynamic Signal Processing Instrument) make
up a highly scalable system for multi-channel signal processing and data acquisition.
Unlike other general-purpose computer-based data acquisition systems, ADRE Sxp and
the 408 DSPi are specifically designed for real-time highly parallel signal processing and
presentation. This extremely versatile system incorporates the features and capabilities
of many types of instrumentation into a single platform. The functionality of
instrumentation such as oscilloscopes, spectrum analyzers, filters, signal conditioners,
and digital recorders have all been included. The system is designed specifically for
corporate network environments, can be operated remotely across a LAN/WAN, or store
data in full Stand-Alone operation without the need for an additional/external computer.
As a result, additional equipment is seldom, if ever, needed. When using the systems
real-time display capability, data can be displayed continuously, independently of data
being stored to permanent memory. For established ADRE users, it is important to know
that ADRE Sxp supports all your previous ADRE for Windows databases.
An ADRE Sxp data acquisition system consists of:
one (up to four)* 408 Dynamic Signal Processing Instrument(s) and
ADRE Sxp client software and
a computer system capable of running ADRE Sxp software.
The 408 DSPi is fully portable or can be rack mounted allowing convenient operation in
test stands, on-site, or remote locations. The 408 DSPis highly configurable design
provides support for virtually all standard and non-standard input types including both
dynamic transducer signals (such as proximity probes, velocity transducers,
accelerometers, and dynamic pressure sensors), and static signals (such as process
variables from transmitters and distributed control systems, 4-20mA). For rotating
machinery applications, a Keyphasor or other speed input signal (such as magnetic or
optical transducer) can be provided to drive synchronous sampling and order tracking.
The system also supports multiple triggering modes for automated data acquisition,
allowing it to be used as a data or event logger without an operator present.
The Client-Server architecture allows multiple software clients to operate and
simultaneously view data from single/multiple 408 DSPi systems simultaneously. Users
can view data independently from one another in the fundamental measurement units of
their choice. Software installation and configuration are quick and easy, allowing mass
configuration of multiple channels with minimal user intervention. Configuration templates
further speed the process. A user can install the software, produce a configuration, and
begin capturing data in just minutes.
Notes:
(*) Connecting up to four 408 DSPi systems will be supported after first release. All hardware
connectivity is currently in place.
Page 1 of 16
Page 2 of 16
Networking Overview
The 408 DSPi is a secure network appliance that supports
DHCP or fixed IP addressing based on your network
environment needs. When installed on a LAN/WAN in
DHCP mode, the DHCP server or router will assign an IP
address to the 408 DSPi. A fixed IP address can be
assigned using ADRE Sxp software. When a direct
connection to the 408 DSPi is established from the client
computer, the IP address will be automatically assigned. In
some instances, primarily when navigating corporate
security infrastructures, firewalls, etc, specific router
configuration may be necessary to operate over a VPN
(Virtual Private Network). Contact your local Bently Nevada
technical support representative for details specific to your
needs.
Specifications
(1)
Non-RMS, NonIntegrated
Amplitude:
Lists of specifications
AC Coupled - Hi Mode:
1.6 Hz to 50kHz ( 96 to 3M rpm )
(2)
1% of Full Scale Range
System
DC Coupled - Hi Mode:
1 Hz to 50kHz ( 60 to 3M rpm )
(2)
1% of Full Scale Range
.011V below 1 V pp
Data Storage
Capacity:
Internal - 130GB
External - Multi Terabyte via external
U320 SCSI drive array (requires
configuration changes, please
contact Bently Nevada technical
support for details specific to your
needs).
Communication:
Dual 1000/100Mb RJ45 Ethernet
Ports
Protocol - TCP/IP
DHCP or Fixed IP addressing
LAN/WAN compatible
Velocity
AC/DC Coupled Hi Mode:
10 Hz to 50kHz ( 600 to 3M rpm )
(2)
1% of Full Scale Range
AC Coupled Low Mode: N/A
Acceleration
AC/DC Coupled Hi Mode:
10 Hz to 50kHz ( 600 to 3M rpm )
(2)
1% of Full Scale Range
Acceleration
DC Coupled Low Mode:
3 Hz to 50kHz ( 180 to 3M rpm )
(2)
1% of Full Scale Range
Velocity
DC Coupled Low Mode:
3 Hz to 50kHz ( 180 to 3M rpm )
(-3db @ 3Hz )
(2)
1% of Full Scale Range
Page 3 of 16
Range:
High Pass 1 Hz to 25.5kHz
Low Pass 10 Hz to 50kHz
Non-RMS
Integrated, RMS
Integrated
Amplitude:
Acceleration
AC Coupled Hi Mode:
10 Hz to 20kHz ( 600 to 1.2M rpm )
(2)
1% of Full Scale Range
Velocity
AC Coupled Hi Mode:
3 Hz to 20kHz ( 180 to 1.2M rpm )
(2)
1% of Full Scale Range
Direct Measurement Update Rates
Valid KPH or Simulated KPH present:
0 to Peak / Peak to Peak values
updated every 4 KPH periods.
Invalid KPH or No KPH present:
High Mode 2 sec sliding window
Low Mode 12 sec sliding window
100ms update rate
Integrated Values:
High Mode 2 sec sliding window
Low Mode 2 sec sliding window
100ms update rate
(3)
Options:
HPF < 10 Hz ( 2 Pole )
HPF 10 Hz ( 2, 4, 6, 8 Pole)
LPF 10 Hz ( 2, 4, 6, 8 Pole)
-3db Corner Frequencies:
HPF & LPF - 1 Hz Increments,
-3db 5%
Bandpass Measurement Update Rates
Valid KPH or Simulated KPH present:
0 to Peak / Peak to Peak values updated
every 4 KPH periods.
Invalid KPH or No KPH present:
Integrated 2 sec sliding window
Non-Integrated 2 sec sliding window
100ms update rate
Filtered
Measurements:
Non-RMS, NonIntegrated
Amplitude:
1 Hz to 50kHz ( 60 to 3M rpm )
(2)
1% of Full Scale Input
Non-RMS
Integrated, RMS
Integrated
Amplitude:
1 Hz to 20kHz ( 60 to 1.2M rpm )
(2)
1% of Full Scale Input
Bandpass Filter
Selections:
(Typical )
Butterworth
2 Pole ( -40 db/decade )
4 Pole ( -80 db/decade )
6 Pole ( -120 db/decade )
8 Pole ( -160 db/decade )
FOR REFERENCE ONLY
REFER TO DOCUMENT #172179
Page 4 of 16
Resolution:
244 nA / bit
Response to 95 / 99 % of final value:
5.3 / 8.84 sec
Low-pass filter -3db 5% @ .09 Hz
Gap Voltage
Measurements:
Measurement Ranges:
0 V to 24 Vdc
-24 V to 0 Vdc
-12 to 12 Vdc
-24 to 24 Vdc
Upper and Lower voltage range fully
programmable between -25 to 25
Vdc
Dynamic Waveform
Data:
Amplitude:
0.13% of FSR @ -25 to 25 V
0.26% of FSR @ 0 to 25 V
0.26% of FSR @ -12.5 to 12.5 V
Resolution:
Measured 366.2 V @ 24 V FSR
Response to 95 / 99 % of final value:
Instantaneous Gap: 0.95 / 1.59 sec.
-3db 5% @ 0.5 Hz
Average Gap : 5.3 / 8.84 sec,
-3db 5% @ .09 Hz
Process Variable
Measurements:
Voltage Inputs:
0 to 10 Vdc ( Typical )
1 to 5 Vdc ( Typical )
Measurement Range:
-25 to 25 Vdc ( Upper and Lower
voltage range fully programmable)
Amplitude:
0.12% of FSR @ 25V
0.30% of FSR @ 10V
0.75% of FSR @ 1-5V
(FSR = Full Scale Range)
Resolution:
152.588 V ( 0 to 10 Vdc )
61.035 V ( 1 to 5 Vdc )
Response to 95 / 99 % of final value:
0.95 / 1.59 sec.
Low-pass filter:-3db 5% @ 0.5 Hz
Output:
Up to 2 simultaneous synchronous
waveforms per channel
4 20 mA Input:
Input Range: 0 - 41.6 mA max
Amplitude:
1% of Full Scale Input
FOR REFERENCE ONLY
REFER TO DOCUMENT #172179
Page 5 of 16
Hardware
Generated Spectra:
Spectral Lines:
6400, 3200, 1600, 800, 400, 200,
100 lines, selectable. One
asynchronous spectrum per channel.
Windowing provided on spectrum up
to 800 lines, Rectangular, Hanning,
Flat-Top
Free Running Spectrum: one per
channel
Zoom Spectrum: One asynchronous
spectrum per channel.
Center Frequency: Configurable in 1
Hz increments
Zoom Factors: 2, 5, 10, 20, 50
Spectral Lines: 100, 200, 400, 800
(2)
(1)
DC Coupled - Hi Mode:
1 Hz to 20kHz ( 60 to 3M rpm )
(4)
1% of Full Scale Range
.011V below 1 V pp
Inputs:
3 speed inputs per card (single
ended), maximum 2 cards per
Page 6 of 16
(2)
Auto-Threshold:
1 rpm 120k rpm (0.0167 Hz 2kHz),
min voltage required at low freq
Manual Threshold:
1 rpm to 120k rpm (0.0167 Hz to 2kHz)
-25 Vdc to 25 Vdc, 0.10 Vdc
increments
Input Clamping:
-25 to 25 Vdc, 0.01 V increments,
positive and negative
Waveform Transformation:
Inverting or non-inverting
Amplitude:
0.14% of FSR @ -25 to 25 V
0.28 of FSR @ 0 to 25 V
0.28% of FSR @ -12.5 to 12.5 V
Hysteresis:
0.2 to 2.0 V, 0.2 V increments
0.2 to 1.0 V, 0.2 V increments (Optical )
AC Gain :
1, 2, 5, 10
Resolution:
Measured 381.47 V @ 25V range
Status:
Boot Status
Self-test
Over/Under Speed
Activity
Edge Pulse
(4)
Triggering:
Automatic or Manual Mode
Positive or negative edge of signal
input, selectable.
FOR REFERENCE ONLY
REFER TO DOCUMENT #172179
Page 7 of 16
Data Collection
Trigger/Event:
Triggers:
Amplitude - any variable, or, per
channel. (amplitude, phase, nX,
Direct, Bandpass, Gap, Process
Variable)
Rpm - upper and lower level, per
speed input
Time - User programmable,
recurring, scheduled
External Contact - high or low voltage
input , normally open, normally
closed logic selectable in software
High Voltage:
90 V to 240 V (AC or DC)
4 mA Maximum current
62 k 2 %
(High voltage input to return)
(6)
Low Voltage:
5 V to 30 V (AC or DC)
15 mA Maximum current
2.15 k 2 %
(Low voltage input to return)
Physical
Sampling Events:
rpm - 1 rpm to 120k rpm, min 1
rpm increments
Time - 0.1 sec to 999 hours, 0.1
sec increments.
16mS minimum event period for all
sampling events.
Amplitude programmable,
absolute or % change ( not in first
release )
(6)
Rpm Error
Phase Error
1 to 6k
6k to 30k
30k to 60k
+/- 7 rpm
+/- 1 deg
60k to 90k
+/- 20 rpm
+/- 1 deg
90k to 120k
+/- 40 rpm
+/- 2 deg
120k to 300k
300k to 600k
N/A
N/A
600k to 900k
N/A
900k to 1200k
N/A
Dimensions
408 DSPi (L x W x H)
36.1 x 41 x 10 cm (14.25 x 16 x 3.8 in)
Power Supply (L x W x H)
18.3 x 13.7 x 9.1 cm (7.2 x 5.4 x 3.6 in)
Weight
9.5 kg (21 lbs) 408 DSPi @ 32
channels
1.3 kg (3 lbs) Power Supply
Construction
408 DSPi
Aluminum Chassis
Cast aluminum front and rear
panels.
Black Powder Coating textured
finish, indoor/outdoor use.
Environmentally sealed momentary
tactile switches.
Bayonet locking external power
connector
Environmental
Operating Temperature:
408 DSPi and External Power Supply
0 C to +50 C (+32 F to +122 F)
Note: Rated specifications at fan inlets. Do
not block fans during operation, unobstructed airflow is required.
Page 8 of 16
Storage Temperature:
-30 C to +80 C (-22 F to +176 F)
Relative Humidity
0% to 95% non-condensing
Approvals: (System)
CE Mark
Vibration:
0.25G @ 5-100Hz operational
3G @ 5-100Hz non-operational
Shock:
10G @ 2mS operational & nonoperational
Environmental Considerations
The 408 DSPi is designed to meet a broad range of
use cases and environments. Significant design
measures have been implemented to provide a
robust electrical and mechanical package. Shock
isolation mounts are used internally on critical
components and careful attention focused on
reliability of the system including extensive shock,
vibration, and temperature exposure. The robust
shipping case is designed for transportation and
shipment in the most rigorous environments.
The 408 DSPi is a measurement instrument and
should be treated with the appropriate consideration.
Exposure to extreme environments will have
constraints. Direct exposure to condensing liquids,
rain, sand, or other particulates that could impair
ventilation are however, not appropriate. In scenarios
that may exceed environmental specifications
custom solutions can be created to meet specific
needs. If you have any questions regarding an
application please contact your local Bently Nevada
representative,
CE Mark Directives
EMC Directives 89/336/EEC with amendments
Declaration of Conformity available online http://www.bently.com/prod/products/certs/certificates.htm
IEC / EN61000-3-2
Harmonics
IEC / EN 61000-3-2/A14: 2000
Flicker
IEC / EN 61000-3-3: 1995
IEC / EN61000-6-2
Electrostatic
Discharge
EN 61000-4-2: 1995 Criteria B
Electro-Magnetic
Field
EN 61000-4-3: 1995 Criteria A
Electrical Fast
Transient
EN 61000-4-4: 1995
AC Power, Criteria B
Signal Ports, Criteria B
Input Power
External Power Supply:
Input:
90/264 Vac, 47/63 Hz auto sensing
Surge Capability
EN 61000-4-5: 1995
AC Power, Criteria B
Signal Ports, Criteria B
Output:
+32 Vdc 5% @ 10 A Max
+5 Vdc 3% @ 600 mA Max
RF Conducted
Surge Protection:
Up to 2kV Max
Voltage Dips/
Interrupt
EN 61000-4-6: 1996
AC Power, Criteria B
Signal Ports, Criteria A
EN 61000-4-11: 1994
30% 0.5 Periods, Criteria B
60% 5 Periods, Criteria C
60% 50 Periods, Criteria C
LED Indicators:
AC Power ready
DC Output enabled
Fault Latch Detection
Faults:
AC supply fault
Over/Under output voltage error
FOR REFERENCE ONLY
REFER TO DOCUMENT #172179
Page 9 of 16
E: Slot # 5 Option
IEC / EN61000-6-4
Radiated
Emissions
00
Empty Slot
01
EN 55011: 1998
F:
Conducted
Emissions
EN55011: 1998
None
01
02
USA EMC
CFR 47 FCC
Radiated
Emissions
None
01
02
01
Conducted
Emissions
I:
FCC 15
All Cards
Ordering Information
408 DSPi
168679-AXX-BXX-CXX-DXX-EXX-FXX-GXX-HXX-IXX
A: Slot # 1 Option
00
Empty Slot
01
02
B: Slot # 2 Option
00
Empty Slot
01
02
A: Version
C: Slot # 3 Option
00
Empty Slot
01
02
01
Initial Order
98
Update
D: Slot # 4 Option
01
02
00
Empty Slot
01
02
10
02
10
02
10
Accessories
01
168905 - 02
02
168906 - 02
10
F:
02
10
172068
02
173887
174466
169633
169337
10
Page 11 of 16
169347 - 01
102357 - 01
169234 - 01
123135
169714 - 01
166812 - 01
166813 - 01
172262 - 01
10798 - 03
20545 - 25
20211 - 05
02290050
02290002
174968
176472
Page 12 of 16
1Ghz Processor
512MB RAM
40 GB HDD (100MB Free Space)
CD-ROM
100 Mb Ethernet
800x600 SVGA
Computer Peripherals
Selection of additional external peripherals should be
evaluated on a case-by-case basis. User needs can be
very different and therefore generic solutions are not
recommended. Peripherals such as printers, external
hard drives, monitors, or other devices can be provided
to best meet your needs. Please provide your Bently
Nevada representative with specific requirements.
Page 13 of 16
Tabular List
Archive
Viewer
Current Values
X vs. Y
Network
Viewer
Full
Function
Control Triggering
On-the-fly Configuration
Changes
Set Active
Database/Configuration
Modify System Properties
Update/Service 408
408 Diagnostics
Configure Network Settings
Page 14 of 16
176559-01
172179
172937-01
Page 15 of 16
408 DSPi with Optical KPH and Laser Tachometer speed input transducers.
2005-2007 General Electric Company. All rights reserved.
ADRE, Bently BALANCE, Keyphasor, and
System 1 are trademarks of General Electric Company in the United States and other countries.
Microsoft, Windows 2000 and Windows XP are registered trademarks of Microsoft Corporation in the United States and/or other countries.
Page 16 of 16