Professional Documents
Culture Documents
Eq Perforacion Compresoras 375 HPDQ
Eq Perforacion Compresoras 375 HPDQ
Eq Perforacion Compresoras 375 HPDQ
Part Number:
02250169-733
keep for
future
reference
Sullair
corporation
200705010000
Section 2
DESCRIPTION
2.1 Introduction
The Sullair 300HH, 375, 375H, and 425 CFM Standard
and Aftercooled Portable Air Compressors offer superior
performance, reliability and require a minimal amount of
maintenance. Compared to other compressors, Sullairs
are unique in terms of reliability and durability. Compressor
internal components require no routine maintenance
inspections.
375 Caterpillar Standard and Aftercooled/Filtered Operators Manual and Parts List
SECTION 2
SU_0000673
1.
2.
3.
4.
5.
6.
7.
8. Service Valves
9. Serial Number Plate Location
10. Receiver/Sump Tank
11. Minimum Pressure/Check Valve
12. Engine Exhaust Muffler
13. Moisture Separator
14. Optional Discharge Air Filters
Figure 2-1: Sullair Rotary Screw Portable Air Compressor Caterpillar Standard and Aftercooled Models
The control system can easily be adjusted for pressures
from 80 to 125 psig (5.6 to 8.6 bar) for standard machines,
from 80 to 150 psig (5.6 to 10.3 bar) for H machines and
from 80 psig to 200 psig (5.6 to 13.8 bar) for HH
machines. The compressor unit is driven by an industrial
diesel engine designed to provide enough horsepower to
provide an adequate reserve under rated conditions.
375 Caterpillar Standard and Aftercooled/Filtered Operators Manual and Parts List
DESCRIPTION
The engine radiator, charge air cooler, and the compressor
fluid cooler are next to each other allowing the fan air to
push through all three simultaneously. As air passes
through the fluid cooler, the heat of compression is
removed from the fluid. The compressors high capacity
fuel tank contains enough fuel for one eight hour shift
under normal operating conditions.
2
1
4
SU_0000664
1.
2.
3.
4.
5.
6.
Fluid Cooler
Engine
Compressor
Thermal Valve
Fluid Filter
Receiver Tank
SECTION 2
WARNING
DO NOT remove caps, plugs
and/or other components when
the compressor is running or
pressurized. Stop the compressor
and relieve all internal pressure
before removing these items.
375 Caterpillar Standard and Aftercooled/Filtered Operators Manual and Parts List
DESCRIPTION
2
STANDARD MODEL
4
8
7
14
15
13
11
AFTERCOOLED MODEL
12
10
SU_0000665
1.
2.
3.
4.
5.
6.
7.
8.
Engine
Strainer
Minimum Pressure/Check Valve
Service Air Outlet
Receiver Tank (Sump)
Separator Element
Minimum Pressure Valve
Non-Aftercooled/Aftercooled Service Air Valve
375 Caterpillar Standard and Aftercooled/Filtered Operators Manual and Parts List
SECTION 2
6
1
21
3
4
8
2
22
16
9
18
19
20
15
10
11
14
12
17
13
SU_0000666 CAT T2
Figure 2-4: Control System with Piping and Instrumentation - 375 and 425 Models
375 Caterpillar Standard and Aftercooled/Filtered Operators Manual and Parts List