Professional Documents
Culture Documents
Usb Opto: © Technical Information Systems, 2008
Usb Opto: © Technical Information Systems, 2008
USB OPTO
OVERVIEW
The Man3000 USB OPTO Isolator is a USB to SERIAL converter with built in OPTO
Isolation on both the TX and RX channels. The unit will only work with Man3000
hardware.
WIRING
The USB OPTO needs four wires to operate. These are supplied on all of the latest
Man3000 hardware configurations. Some of our older designs that were made before the
invent of the OPTOs do not supply all the connections and may need to be sent to TIS
for modification.
DB25 USB OPTO
PIN NAME
RX
TX
0V
22
+ 6V
p1
You may refer to the individual product documentation for the specific wiring to an OPTO.
WORKING HARDWARE
REQUIRE MODIFICATION
Man3000 Standard
Man3000 Lite
Fosonic Internal
Man3000 Superlite
LAN/IP Buffer
B4_Remote
Man3000 SOFT
Dual LAN
B4_Hymax Internal
B5_DCS Internal
B5_NX Internal
DRIVER INSTALATION
p2
Once the drivers have been installed open windows DEVICE MANAGER.
Under the PORTS menu you will find CP2101 UART BRIDGE CONTROLER.
MANUAL DETECTION
ERRORS
p3