Professional Documents
Culture Documents
How To
How To
Index
1
2
3
4
5
click to download
USB driver
click to download
This operation downloads, or runs, the self extracting file USB_drivers.exe
Internet Explorer: double click on Install Flash Player 9 ActiveX.msi, click Install
and when installation is completed, push Finish
FireFox: double click on Install Flash Player 9 plugin.msi, click Install and when
installation is completed, push Finish
4.
5.
WEB LCT is the application you need to access ALC plus management.
Through an internet browser, a LAN and the IP address of its Ethernet port, the ALC plus can be
managed and configured.
When LAN is not present a USB serial connection must be used.
WEB LCT console is the application that establishes this USB connection and opens the internet
browser window necessary to manage it.
1. Connect the PC to ALC plus (LCT connector) through an USB cable
2. Start Web Lct Console by means of a double click over the relevant icon in the tray zone
of Windows Application bar
3. Web Lct Console window appears (see Fig. 1)
6. Select Connect using direct serial cable and push Settings see fig.3
7. Select the USB connection: Modem Erio Connection USB ModemDirect , check if the
dialling number is 123 and push Configure
8. The Modem Configuration window appears (see Fig.4)
9. All options must be not marked and the Max bit rate must be 230400 bps. Push OK to
close the Modem Configuration window
10. Push OK to close the Modem selection window
11. Pusk OK to close Options window. The USB connection is configured properly
12. Push Connect to start the connection towards the ALC plus. The browser will show the
WebLct window (see Fig.5)