Professional Documents
Culture Documents
3.0 MEM564 Sylibus
3.0 MEM564 Sylibus
Page 1
Mac-Julai 2013
COURSE NAME/CODE:
Manufacturing Processes Lab (MEM564)
Laboratory Name
Coordinator
Metrology
Lecturer Name
Mohamad Firhan Morni
Contact No
016-9029082
Ziyadi Zamri
012-6939877
Metal Casting
019-3931403
012-6408782
019-2719150
019-3828645
019-3757406
016-9029082
COURSE OUTCOMES
Upon completion of this course, students should be able to:
CO1
CO2
CO3
CO4
COURSE DESCRIPTION
The course provides students with hands-on experience on the operation, evaluation and
overcoming problems related to basic manufacturing practices such as in metal casting,
welding and thermal cutting, non-traditional machining and the use of metrological
instruments in this field. Demonstration and practical on certain manufacturing practices
will be carried out.
Page 2
Mac-Julai 2013
SYLLABUS CONTENT
1.0
Metrology (6 hours)
1.1 Introduction and demonstration on safety and measuring equipment in
Metrology Laboratory
1.2 Geometric measurement such as straightness, flatness, roundness and
measurement of surface roughness, coordinate measuring machine and
profile measurement
2.0
3.0
4.0
5.0
TEACHING METHODOLOGY
Laboratory
Laboratory demonstrations and practical related to the course contents.
Peer Assessment
Students comment on and judge their colleagues work,
Supervisor Assessment
Supervisor comment on and judge their students work,
Page 3
Mac-Julai 2013
ASSESSMENTS
Items
Laboratory Report
Peer Assessment
Supervisor Assessment
Final Examination
GRADING SCALE
4.00
A+
4.00
A
3.67
A3.33
B+
3.00
B
2.67
B-
Marks
50%
10%
40%
0%
90 100
80 89
75 79
70 74
65 69
60 64
2.33
2.00
1.67
1.33
1.00
0.67
0.00
CO Assessment
CO1, CO4
CO3
CO2
C+
C
CD+
D
E
F
55 59
50 54
47 49
44 46
40 43
30 39
0 29
RECOMMENDED TEXTBOOK
None
REFERENCES
Mikell P Groover, Principles of Modern Manufacturing, SI Version, 4 th Edition,
John Wiley & Son, Inc, 2011
Serope Kalpakjian, Manufacturing Engineering and Technology, 10th Edition,
Illinois Institute of Technology, Prentice Hall, 2010
P N Rao, Manufacturing Technology, Metal Cutting and Machine Toosl,
Universiti Teknology Mara, Malaysia, Tata Mc Graw Hill, 2000.
John A. Schey, J.A., "Introduction To Manufacturing Processes", 5th Edition,
McGraw-Hill, 2000.
IMPORTANCE MASSAGES:
ZERO MARK will be given to those:
Submitting the report after due date
Absent from the Laboratory session.
Plagiarize on Report (to use another person's idea or
a part of their work and pretend that it is your own)
Page 4
Mac-Julai 2014
FORM EM/OBE/CO-PO
CO-PO Matrix
COURSE CODE
COURSE NAME
CREDIT HOURS
MEM564
MANUFACTURING PROCESSES LAB
1
COURSE OUTCOMES
CO1
CO2
CO3
CO4
Recognize relevant
machineries, processes,
instruments and tools used
in manufacturing industry
Conduct practical and
assessments related to the
manufacturing processes
and technology using
specific tools and
machineries.
Working in a group to
perform each task
correctly through
established procedures.
Prepare technical reports
in a professional manner
CENTRE OF STUDY
REVIEWED BY
DATE
PROGRAMME OUTCOMES
PO1
PO2
PO3
PO4
PO5
PO6
PO7
PO8
PO9
PO10
PO11
PO12
MANUFACTURING
BULAN ABDULLAH
3 JAN 2011
INSTRUCTIONAL
METHODS
ASSESSMENT
METHODS
Briefing &
Demonstration
Practical
Supervisor
Assessment
Practical
Peer
Assessment
Discussion
Reports
Report
Page 5
Mac-Julai 2014
Page 6
Mac-Julai 2014
PO Description
PO1
PO2
PO3
PO4
PO5
PO6
PO7
PO8
PO9
PO10
PEO1
PO-PEO Matrix
PEO Description
PEO2
PEO3
PEO4
Page 7
Mac-Julai 2014
the capacity to do so.
PO11
PO12
Page 8