You are on page 1of 1

Sr.

1
2
3
4
5
6
7
8
9
10
11
12

3G SSV Drive Test Procedure ( Telenor )


Check the Swap for both 2G and 3G, if found then need to be removed with the help
of BSS team
Perform HSPA+ or HSDPA Testing by using Modem device minimum 25 MB file
( Average should be 2 to 3 Mbps ) Data Card will be used
Perform HSUPA Testing by using TEMS phone minimum 10 MB file ( Average
should be 1 to 2 Mbps ) Data Card will be used
Perform R99 Downlink: 200 to 500 Kbps, at least 3 MB file
Perform R99 Uplink: 100 to 200 Kbps, at least 3 MB file
10 video calls for each sector of 20 sec duration and 10 sec interval ( 1 Blocked call
is allowed only ) ( MOC & MTC both will be used)
10 Voice Calls per sector will be made by keeping Call duration 30 seconds and 30
seconds interval ( MOC & MTC both will be used)
10 SMS to be sent from each sector ( MOC & MTC both will be used)
Clock-wise and Anti-clockwise Handovers ( 1-2-3-1 and 1-3-2-1 )-WCDMA locked,
preferable in normal mode but if no route then could be forcefully
IRAT HO for all sectors ( MOC & MTC both will be used)
3G to 2G and 2G to 3G cell reselection for all sectors ( could be forcefully )
For coverage, MS1 ( Scanning mode ) MS2 ( Long call WCDMA locked ), and for
each sector only 1 log is required for Out Handover, make sure to cover proper route

You might also like