Professional Documents
Culture Documents
Setting Your Computer Up To Monitor Sound Using OSC251
Setting Your Computer Up To Monitor Sound Using OSC251
2. Select(tick) the item you want to see the waveform from-only one can be selected at at time.(Mic
or /Mixer is what youll be using)
3. If it is the microphone, make sure the volume slider is raised all the way.
4. When selecting /mixer put slider at lowest position or a feedback type effect may occur.
Finally:
1.Open OSC251(Winscope) then
2. Press play on the OSC control(a horizontal line should appear on the screen).
/var/www/apps/conversion/tmp/scratch_1/281192493.docPage 1 of 2
3. Start your sound file or speak into the microphone. A waveform should appear!
4. OSC will probably crash if you have a sound file playing before you open it.
See the word fileosc3.doc or printouts for further instructions on how to use OSC251
Good luck.
/var/www/apps/conversion/tmp/scratch_1/281192493.docPage 2 of 2