Professional Documents
Culture Documents
Response Form: Questionnaire For The Area of Forging
Response Form: Questionnaire For The Area of Forging
Fax: 734-207-7222
Phone: 734-207-7200
Seite 1 von 5
Short-stroke hammers
Counterblow hammers
Screw presses
Crank forging presses, optional with DualDrive / servodrive
Multi-station presses with eccentric drive / otional with servo drive
Hydraulic forging presses
Wheel rolling mills for railway wheels
Hydraulic presses for forging ring blanks
Hydraulic presses for forging aluminium wheels
Open die forging systems
3.
manual
automated
What are the die size that the line must accommodate?
Dimensions/smallest part:
Dimensions/largest part
Diameter
mm
Lenght
mm
Diameter
mm
Lenght
mm
Weight/smallest part
kg
Weight/largest part
kg
kN
4.
5.
parts at
ppm
per hour
7.
8.
Station spacing:
mm
kN
mm
ft/lbs from
kJ
spm at
Tools
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Slide / Tub
Slide dimension
mm
Slide stroke
mm
Slide locking
In TDC
mm
In incrediments
mm
pneumatic
hydraulic
Number of forces
Ejectors in slide
pneumatic
hydraulic
Number of forces
Opening betw. uprights in part flow direction
mm
mm
Seite 3 von 5
% Drop
or USD
max. capacity
max. capacity
max. capacity
max. capacity
max. capacity
max. capacity
max. capacity
Short-stroke hammers
max. capacity
Counterblow hammers
max. capacity
Screw presses
max. capacity
max. capacity
max. capacity
max. capacity
max. capacity
max. capacity
max. capacity
max. capacity
max. capacity
Other:
Seite 4 von 5
Seite 5 von 5