Professional Documents
Culture Documents
Moisture in The Analysis Sample of Coal and Coke: Standard Test Method For
Moisture in The Analysis Sample of Coal and Coke: Standard Test Method For
1. Scope
1.1 This test method covers the determination of moisture in
the analysis sample of coal or coke. It is used for calculating
other analytical results to a dry basis. When used in conjunction with the air drying loss as determined in accordance with
Method D2013 or Practice D346, each analytical result can be
calculated to an as-received basis:
1.2 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents
2.1 ASTM Standards:2
D346 Practice for Collection and Preparation of Coke
Samples for Laboratory Analysis
D2013 Practice for Preparing Coal Samples for Analysis
D3180 Practice for Calculating Coal and Coke Analyses
from As-Determined to Different Bases
D3302 Test Method for Total Moisture in Coal
Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
Copyright by ASTM Int'l (all rights reserved); Fri May 24 13:16:14 EDT 2013
1
Downloaded/printed by
Universidad Industrial De Santander Bucaramanga Columbia pursuant to License Agreement. No further reproductions authorized.
D3173 11
TABLE 1 Precision
Coal
Coke
Range
Repeatability
Limit
(r)
Reproducibility
Limit
(R)
1.0 21.9 %
0.181.87%
0.09 + 0.01xA
0.08
0.23 + 0.02xA
0.24
(1)
where:
A = grams of sample used and
B = grams of sample after heating.
FIG. 2 Capsule for Use in Determining Moisture
Copyright by ASTM Int'l (all rights reserved); Fri May 24 13:16:14 EDT 2013
2
Downloaded/printed by
Universidad Industrial De Santander Bucaramanga Columbia pursuant to License Agreement. No further reproductions authorized.
D3173 11
10.2 BiasCertified Reference Materials are not available
for the determination of bias by this test method.
NOTE 1One coke sample was analyzed in the interlaboratory study
which generated the first row of information in Table 1. The average
moisture of the coke sample was 0.36 %. The repeatability limit for this
sample is 0.10. The reproducibility limit for this sample is 0.15. The
repeatability standard deviation for this sample is 0.036. The reproducibility standard deviation for this sample is 0.053.
ANNEX
(Mandatory Information)
A1. PRECISION STATISTICS
A1.3 Reproducibility Standard Deviation (SR)The standard deviation of test results obtained under reproducibility
conditions.
NOTE 1The R-Squared statistic for both the repeatability (r) and
reproducibility (R) indicates that the model as fitted explains 62% of the
variability in the two variables.
Material
Average
Sr
SR
91-2Ivb
91-1 hvAb
91-5 hvAb
89-4 hvCb
91-4 hvCb
90-1 subB
89-7 subA
91-6 subA
89-6 subC
0.9683
1.5689
3.1178
5.4428
9.6392
11.9
12.4556
15.1753
21.9461
0.0479
0.0569
0.0559
0.0601
0.0636
0.1252
0.0798
0.0577
0.1949
0.0853
0.1387
0.0977
0.1408
0.1004
0.2193
0.1188
0.1737
0.2843
0.1341
0.1593
0.1564
0.1682
0.1781
0.3505
0.2234
0.1615
0.5456
0.2388
0.3884
0.2736
0.3943
0.2811
0.614
0.3326
0.4865
0.796
Copyright by ASTM Int'l (all rights reserved); Fri May 24 13:16:14 EDT 2013
3
Downloaded/printed by
Universidad Industrial De Santander Bucaramanga Columbia pursuant to License Agreement. No further reproductions authorized.
D3173 11
TABLE A1.2 Repeatability (Sr, r) and Reproducibility (SR, R)
Parameters Used for Calculation of Precision Statement for Coke
Samples
Material
CK980108 - Furnace
CK980312 - Furnace
CK980716 - Foundry
CKReference2 - Furnace
CKNIST01 - Foundry
CKNIST02 - Furnace
CK0303 - Foundry
CK9903 - Foundry
CK9904 - Furnace
CK0001 - Furnace
CK0401 - Furnace
CK0002 - Breeze
CK0302 - Breeze
CK0003 - Foundry
CK0101 - Furnace
CK0504 - Furnace
CK0701 - Furnace
CK0102 - Furnace
CK0301 - Furnace
CK0404 - Furnace
CK0103 - Furnace
CK0304 - Furnace
CK0601 - Furnace
CK0903 - Furnace
CK0104 - Furnace
CK0503 - Furnace
CK0201 - Furnace
CK0501 - Furnace
CK0802 - Furnace
CK0904 - Furnace
CK0202 - Furnace
CK0502 - Furnace
CK0603 - Furnace
CK0203 - Furnace
CK0403 - Furnace
CK0604 - Furnace
CK0801 - Furnace
CK0204 - Breeze
CK0402 - Breeze
CK0602 - Breeze
CK0704 - Breeze
CK0702 - Furnace
CK0902 - Furnace
CK0703 - Coke
CK0803 - Furnace
CK0804 - Furnace
CK0901 - Coke
CK1001 - Furnace
Average
Sr
SR
0.19
0.30
0.27
0.18
0.57
0.30
0.75
0.50
0.65
0.44
0.58
0.46
0.55
0.31
0.19
0.28
0.29
0.33
0.34
0.50
1.04
1.49
1.54
1.87
0.20
0.35
0.51
0.59
0.72
0.77
0.35
0.46
0.53
0.21
0.24
0.23
0.18
0.60
0.72
0.72
0.81
0.64
0.91
1.68
0.43
0.44
0.27
0.29
0.04
0.05
0.03
0.03
0.04
0.03
0.03
0.04
0.03
0.03
0.03
0.02
0.04
0.02
0.02
0.04
0.02
0.04
0.01
0.02
0.03
0.02
0.03
0.07
0.01
0.02
0.03
0.03
0.02
0.03
0.02
0.02
0.04
0.02
0.02
0.03
0.02
0.04
0.04
0.03
0.02
0.06
0.04
0.04
0.02
0.02
0.03
0.03
0.08
0.15
0.10
0.11
0.09
0.06
0.06
0.10
0.10
0.07
0.10
0.15
0.05
0.08
0.08
0.08
0.08
0.10
0.08
0.07
0.30
0.10
0.05
0.08
0.08
0.06
0.08
0.13
0.08
0.08
0.13
0.11
0.08
0.08
0.07
0.09
0.05
0.19
0.10
0.14
0.08
0.24
0.18
0.11
0.10
0.06
0.06
0.11
0.12
0.13
0.08
0.09
0.13
0.09
0.09
0.10
0.08
0.09
0.07
0.04
0.10
0.07
0.04
0.10
0.06
0.10
0.04
0.06
0.07
0.06
0.08
0.18
0.04
0.06
0.08
0.08
0.05
0.08
0.06
0.06
0.10
0.05
0.06
0.07
0.06
0.10
0.12
0.07
0.05
0.18
0.11
0.11
0.06
0.06
0.09
0.09
0.22
0.41
0.29
0.30
0.24
0.18
0.16
0.29
0.27
0.21
0.30
0.42
0.13
0.24
0.23
0.23
0.24
0.29
0.23
0.21
0.84
0.27
0.14
0.23
0.23
0.17
0.22
0.36
0.23
0.24
0.36
0.32
0.23
0.24
0.20
0.26
0.14
0.54
0.27
0.40
0.22
0.67
0.50
0.30
0.28
0.17
0.18
0.30
ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentioned
in this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk
of infringement of such rights, are entirely their own responsibility.
This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and
if not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standards
and should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of the
responsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you should
make your views known to the ASTM Committee on Standards, at the address shown below.
This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,
United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the above
address or at 610-832-9585 (phone), 610-832-9555 (fax), or service@astm.org (e-mail); or through the ASTM website
(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/
COPYRIGHT/).
Copyright by ASTM Int'l (all rights reserved); Fri May 24 13:16:14 EDT 2013
4
Downloaded/printed by
Universidad Industrial De Santander Bucaramanga Columbia pursuant to License Agreement. No further reproductions authorized.