Professional Documents
Culture Documents
Mechanics of Materials Practice Assignment
Mechanics of Materials Practice Assignment
Fig.1
2. Determine the average shear stress developed in pin A of the truss. A horizontal force of
P=40kN is applied to joint C. Each pin has a diameter of 25mm and is subjected to double
shear.
Fig.2
3. The built-up rod BC consisting of a solid bar AB of diameter dAB=1in. and a 2-in. nominal
diameter standard steel tube (see the below table) is subjected to axial forces as shown in
Fig.3. Calculate the normal stress in each part, AB and BC.
Fig.3
5. The force applied at the handle of the rigid lever causes the lever to rotate clockwise about the
pin B through at angle of 2o. Determine the average normal strain developed in each wire. The
wires are unstretched when the lever is in the horizontal position.