Professional Documents
Culture Documents
Interior BOQ 01
Interior BOQ 01
1
2
3
QTY
UNIT
SIZE 50 x 50 x 1.62MM
SIZE 50 x 25 x 1.62 MM
SKINNING / PANELING / BOXING
9 MM THK MARINE PLYWOOD
Providing and fixing 9 mm thick Approved Marine Grade Plywood of
approved quality & make for partitions, facias, skirtings, wall paneling &
soffit etc as per required width and size or as per drawing. Including cost
of making openings for switches, AC facias with the help of adhesives
like fevicol etc, nails / screws etc. The rates quoted shall include
providing openings for wiring and necessary screws etc. All complete as
per detail drawing, as specified and as directed by Architect / Consultant
/ Project - In - Charge. (Actual executed area will be measured)
430
371
SQM
SQM
1240
SQM
25
SQM
50
SQM
175
SQM
PAGE 1 OF 31
SR NO
QTY
UNIT
580
SQM
720
SQM
115
SQM
20
SQM
PAGE 2 OF 31
SR NO
11
QTY
UNIT
20
SQM
PAGE 3 OF 31
SR NO
QTY
UNIT
7
10
20
SQM
SQM
SQM
15
SQM
16
SQM
12
13
14
PAGE 4 OF 31
SR NO
17
18
19
20
QTY
UNIT
SQM
SQM
15
SQM
SQM
PAGE 5 OF 31
SR NO
21
22
23
QTY
UNIT
15
SQM
SQM
DOOR FRAME
Providing and fixing T.W. Door frame of finished size 75 mm x 50 mm
applicable as per profile Shown in the drawing and finished with
approved Veneer and melamine polish and holdfasts/screws as per
details. Measurement of the frame will be taken along the center line of
frame. All complete as per detail drawing, as specified and as directed
by Architect / Consultant / Project - In - Charge. (Actual executed area
will be measured) Basic Rate of Veneer Rs 753 /- per Sqm
70
Rmt
16
RMT
11
SQM
Note :- Measurement of frame shall taken along the center line of frame.
24
25
Item same as above but for brick Walls of Finished Size - 125 mm x 50
mm with hold fasts of approved size.
SOFT BOARD
PAGE 6 OF 31
SR NO
QTY
UNIT
26
WHITE BOARD
Providing and fixing white matt finish" white mark/approved equivalent
"writing board with enameled sheet steel front, GI back over approved
inner core, of specified size black or chocolate colour anodized
aluminum beading to form the screen including the necessary
accessories such as magnetic symbols, magnetic letters, magnetic
strips, magnetic eraser, magnetic dry marker 4 Nos., spare felt for
eraser, board fixing clips etc. and the board shall be made out of
enamelled sheet with backing of AC sheet to suitable thickness etc.
complete and all as per manufacturer's specification and as directed by
the EIC / Architect. Rate shall inclusive of making and fixing wooden
ledge for full length of the board for keeping marker pen, eraser etc.
Rate quoted shall be for the complete finished work including ledge
board to keep accessories, and all materials and labour mentioned
above. All complete as per detail drawing, as specified and as directed
by Architect / Consultant / Project - In - Charge. (Actual executed area
will be measured)
17
SQM
27
T.W MOULDING-15 mm x 15 mm
Providing and fixing in position mouldings out of T.W Moulding of size 15
mm x 15 mm size complete as per profile given in the detail drawing or
as explained out of wooden sections of sizes given below. All should be
finished with melamine polish of approved shade & colour with minimum
3 coats. This item will operate only for those mouldings which are to be
fixed independent of any other item as mentioned in the Bill of Quantities
and not measured under any other item etc. All complete as per detail
drawing, as specified and as directed by Architect / Consultant / Project In - Charge. (Actual executed area will be measured)
30
Rmt
28
29
30
31
32
85
100
125
50
65
RMT
RMT
RMT
RMT
SQM
PAGE 7 OF 31
SR NO
33
34
QTY
UNIT
30
SQM
30
NO
35
195
SQM
36
76
RMT
PAGE 8 OF 31
SR NO
37
38
39
40
41
42
43
44
QTY
UNIT
50
RMT
12
NO
20
SQM
592
SQM
10
SQM
125
SQM
500
SQM
50
SQM
PAGE 9 OF 31
SR NO
45
46
47
48
49
QTY
UNIT
10
SQM
25
RMT
35
SQM
NO
NO
PAGE 10 OF 31
SR NO
DESCRIPTION
50
DOOR CLOSER (DORMA / HAFELE) TS 71
Providing and fixing Door Closures, Dorma TS 71EN-3/4 rack & pinion
overhead door closure suitable for door width max 1100 mm with
standard arm or approved equivalent. All complete as per detail drawing,
as specified and as directed by Architect / Consultant / Project - In Charge.
51
S.S HANDLES - 600 MM high
Providing SS Handles of size 600 mm high in pairs to doors etc of SS
garde 316 as per approved profile of M/s Kitch or approved equivalent.
52
53
QTY
3
UNIT
NO
NO
16
52
NO
NO
45
RMT
16
NO
NO
170
SQM
100
SQM
90
SQM
Providing and fixing Heavy duty ball bearing hinges of size 3/4" (100 mm
x 75 mm x 3mm) suitable for wooden and steel doors with all
accessories complete (Cat No. 551 BB stain less steel of M/s Dorma or
approved equivalent). All complete as per detail drawing, as specified
and as directed by Architect / Consultant / Project - In - Charge.
54
55
56
57
58
59
PROVIDING UPHOLSTERY
Providing fabric/leather upolshtrey to he existing sofas as per approved
fabric shade. Item to complete the change in upholstory with out making
any change to the design and also not damaging the structure of the
sofas as per direaction of EIC/Architect. Basic rate of fabric is Rs 700
per rmt
DEAD LOCK
Supply and fixing of SS dead locks of Dorma ref no- 778 make
/approved equivalant with standard lock case for europrofile cylinder of
required size for minimum 60 mm thick door.
IN OUT TRAYS
Providing and arranging in position in-out trays made out of 12 mm
plywood of size 300 mm x 350 mm x 50 mm ( one for in & one for
out)and finished with veneer & melamine polish including necessary TW
members finished with melamine polish etc.; complete in all respects as
per the drawing and the directions of the EIC.
PAINTING WORK
PLASTIC EMULSION PAINT
Providing and applying 3 or more coats of superior quality of Plastic
Emulsion Paint of approvd make on Ceiling/partition of approved make
and shade and to give an even shade including preparation of surface,
applying primer of approved make etc including surface preparation. All
complete as per detail drawing, as specified and as directed by Architect
/ Consultant / Project - In - Charge & manufacturer's specifications. Rate
to include additional coat of paint if required to get smooth and uniform
finish.
ZINC PAINT
Providing and applying Zinc paint of approved make and shade
including, using roller to get approved level surface. Job to include
making necessary surface preparation to receive paint etc. All complete
as per detail drawing, as specified and as directed by Architect /
Consultant / Project - In - Charge.
TEXTURE PAINT ON WALL
PAGE 11 OF 31
SR NO
60
61
62
63
64
QTY
UNIT
50
SQM
25
SQM
50
SQM
DUCO PAINT
Providing and applying in 3 coats lacquer paint of "DUCO" / approved
equivalent.make & shade over metallic surfaces / wooden surfaces after
preparing the surface with water proof putty to get proper surfaces,
applying necessary coats of primer and finishing with matt / textured
finish laquer paint. All complete as per detail drawing, as specified and
as directed by Architect / Consultant / Project - In - Charge.
10
SQM
140
SQM
PAGE 12 OF 31
SR NO
65
66
Note: No extra will be paid for ceiling drops and it will be considered as
flat ceiling and if there is projected drop ceiling curved as per design in
different level it will also be paid as addition to that but only average
bottom surface area will be considered. No extra will be paid for light
cuttings, cutting for glass or stain glass. No extra channel will be paid if
its is required for additional support
ACOUSTICAL TILE FLOORING
Providing and fixing Acoustical Ceiling Tiles of 600 mm x 600 mm size of
Optra series of Armstrong or approved equivalent make for
training/board room application , Contrast Square series, in true
horizontal level suspended on inter locking Grid system using hot dipped
galvanized steel section, entire surface pre - finished in baked polyster
paint, rotary stitched double-web construction main tee of size 42 x
15mm. At every 600mm. C/C. maximum and double rotary stitched cross
tee of size 42 x 15mm at every 600 mm. C/c. and wall angle of size 19 x
19mm. Fixed to the periphery of the wall. The tiles and grid system to be
used as follows:
FRAME WORK & INSTALLATION - SILHOUETTE SECTION
FRAME WORK CONSIST OF
Main Runner spaced at 600 mm center, fixed to the roof at every 1200
mm c/c. In using 2.0 mm thick pre-straightened GI wire. First and last
hanger should not be at a distance more than 450 mm from the adjacent
wall.
600 mm x 600 mm module to be formed by fixing 600 mm Cross Tee
between center of Main Runner.
Wall Angle to be secured to wall at 450 mm centers. Installation to be
done as per approved Manufacturers specification.
Mode of Measurements :- Measurements shall be wall to wall without
any deductions for lights, diffusers etc. Job to executed by Specialized
Agency approved by the original manufacturer .
150 C WOOD FINISHED METALLIC CEILING
QTY
UNIT
250
SQM
35
SQM
PAGE 13 OF 31
SR NO
67
68
69
70
QTY
UNIT
20
SQM
125
150
200
RMT
RMT
SQM
PAGE 14 OF 31
SR NO
71
72
73
QTY
UNIT
NO
NO
NO
PAGE 15 OF 31
SR NO
QTY
UNIT
74
NO
75
NO
NO
NO
Providing and arranging in position Circular Side Tables of size dia 600
mm of approved shape with necessary T.W. frame work of 50 x 25 mm
finished with melamine polish & including necessary hardware, approved
adhesive as per drawings of the following sizes. 19mm thk approved
marine ply top finished with approved veneer & melamine polish and top
to be finished with 12 mm thick Tinted Glass Top with machine polished
beveled edges. wooden leg out of 50 x 50mm in melamine polish,
Additional Curve supports etc. All complete as per detail drawing, as
specified and as directed by Architect / Consultant / Project - In Charge. (Basic rate of veneer RS 70 per sqft)
76
77
PAGE 16 OF 31
SR NO
QTY
UNIT
78
NO
79
NO
80
NO
NO
81
PAGE 17 OF 31
SR NO
QTY
UNIT
NO
All trays in writing desks, side units to have concealed stoppers. All
pencil trays shall have small compartments for keeping miscellaneous
stationaries. All beadings, mouldings and exposed woodwork to be in
matching wood. Foot rest shall be made out of 19 mm plywood and shall
be finished with 1mm thk approved laminate. Rest internal portion will be
finished with french polish. All complete as per detail drawing, as
specified and as directed by Architect / Consultant / Project - In Charge.
All the tables shall have key board drawers to accommodate keyboards
and mouse where ever necessary as per drawings and also shall include
C.P.U unit as shown in the drawings. All drawer use Hettich/approved
equivalant sliding channels. No separate payment shall be made for this.
All complete as per detail drawing, as specified and as directed by
Architect / Consultant / Project - In - Charge.
82
PAGE 18 OF 31
SR NO
83
84
All the tables shall have key board drawers to accommodate keyboards
and mouse where ever necessary as per drawings and also shall include
CPU unit as shown in the drawings approved by EIC. No separate
payment shall be made for this. All complete as per detail drawing, as
specified and as directed by Architect / Consultant / Project - In Charge.
BASIC RATE OF NATURAL VENEER RS 753 /- PER SQM
C & MD EXECUTIVE TABLE
Providing and Fixing in position C & MD Executive Table of size 2400 X
900 mm approved Shape made up of 19 mm thk approved marine
plywood including Drawer Unit, Filling Storage, Space for CPU, 2" thk
marine ply for footrest with veneer finish. 6 mm thk approved marine
plywood for rear side of side unit. 19 mm thk approved marine ply for
Sliding Shutters finished with 4 mm thk approved Veneer to all external
Surface & 1.0 mm thk approved laminate to internal surfaces. The Table
Top shall be finished with burl veneer and polycoating of approved
colour, shade. Sides, apron, front sides finish with veneer and melamine
polish. 19 mm thick approved of plain glass. All drawers to be in marine
plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6
mm thk. marine plywood finished with approved veneer to all external
surfaces & 1.0 mm thick approved laminate to all internal surfaces.
Drawer unit fronts & sides to be finished with veneer & melamine polish.
Edges of table 38 X 25 mm thk & 25 X 25 mm thk wooden moulding with
melamine polish, 12 mm thk Frosted Glass Modesty Panel etc.
All trays in writing desks, side units to have concealed stoppers. All
pencil trays shall have small compartments for keeping miscellaneous
stationaries. All beadings, mouldings and exposed woodwork to be in
matching wood. Foot rest shall be made out of 19 mm plywood and shall
be finished with 1.0 mm thk approved laminate. Rest internal portion will
be finished with french polish. All complete as per detail drawing, as
specified and as directed by Architect / Consultant / Project - In Charge.
All the tables shall have key board drawers to accommodate keyboards
and mouse where ever necessary as per drawings and also shall include
C.P.U unit as shown in the drawings. All drawer use nova slide side
(grass make) No separate payment shall be made for this. All complete
as per detail drawing, as specified and as directed by Architect /
Consultant / Project - In - Charge.
BASIC RATE OF BURL VENEER RS 2421 /- PER SQM)
BASIC RATE OF NATURAL VENEER RS 753 /- PER SQM
DISCUSSION OVAL SHAPE TABLE
QTY
UNIT
NO
NO
PAGE 19 OF 31
SR NO
85
86
87
88
89
90
91
QTY
UNIT
NO
SMT
Smt
Smt
2
5
10
No
No
No
PAGE 20 OF 31
SR NO
92
93
94
95
96
97
98
QTY
UNIT
10
10
2
No
No
No
No
10
5
2
No
No
No
15
SMT
60
SMT
10
Smt
101
PAGE 21 OF 31
SR NO
DESCRIPTION
102
Granite, marble Removal with backing and stacking as directed.
QTY
5
UNIT
Smt
103
104
105
106
2
2
10
1
Cmt
Cmt
Smt
No
107
10
Smt
108
NO
109
SQM
SQM
110
PAGE 22 OF 31
SR NO
QTY
UNIT
SQM
Sqm
113
20
RMT
114
25
RMT
25
Smt
111
112
115
PAGE 23 OF 31
SR NO
116
117
118
119
120
121
122
QTY
UNIT
25
Smt
NO
NO
2
2
2
2
NO
NO
NO
NO
PAGE 24 OF 31
SR NO
123
124
125
126
127
128
129
130
IV.
10mm CP brass /PVC connector pieces.
560x 410 mm dia oval shape wash basin (Ref Cat no 10017) fixed on
marble / Granite counter.
Pedestal Wash basin
Item same as item 123 above but of pedestal type cat no 10007 of
Hindware/approved equivalent with angular cock and other accsoories
Washbasin Counter
Providing and fixing as per drawing wash basin Counter of 600mm wide
constructed out of the granite/marble stone sections combined in pairs
to form sandwich type vertical members except the end touches to wall,
set in cement mortar 1:3, exposed top surface to be finished with the
following polished stone having rounded edge cut as per profile on top of
supporting cuddapah slab of 20 mm thick. Rate to include facia pieces,
for all vertical & horizontal members as per drawing of polished
approved stone with all exposed edges also polished and cut in profile
as required. All joints shall be made water tight in perfect line, level &
slope as desired including curing, polishing & cleaning all joints and
floating in coloured cement mortar. stone shall be of approved colour &
shall be as per Architects approved lot. (Only plan area will be
measured. Wastage due to dimensional difference, pattern, and cutting
sizes available will be to the contractors account). Rate to include
providing all holes & openings required for fixtures and fittings.All as per
drawings and instructions from Engineer in charge.Item to include
providing 100mm granite skirting above platform. plan area will be
mesured.
TOILET ACCESSORIES & MISCELLANEOUS ITEM
Toilet Roll Holder
Providing & Fixing Toilet Paper Roll holders with stainless steel finish of
approved make & quality.Dline Cat. Nos.( 07.4080.01.008 )/approved
equivalent
Glass selves
Providing & Fixing Glass shelves of AIS or Modiguard make as
approved, size 0'6'' - 3'0'' in 12mm thick toughened plane glass with
polished edges. Supported on S.S. ,'D' brackets, as approved.
Towel rails
Providing & fixing Towel rails with stainless steel finish of approved
make & quality.Dline Cat.Nos.( 07.4070.01.500 )/approved equivalant.
Coat hooks
Providing & fixing Coats Hooks of stainless steel cat no 7761 of
Jaquar/equivalantas approved make & quality.
Mirror
QTY
UNIT
NO
No
sqm
NO
NO
NO
NO
SMT
PAGE 25 OF 31
SR NO
QTY
UNIT
Soap dish
Providing and fixing in position soap dish made up of stainless steel of
approved make & quality.Dline Cat. Nos. ( 07.4030.02.001 )
Grab rail
D-Line make or approved equivalent Grab rails
(Cat No.
14.4614.02.306) all complete
SOAP DISPENSER
Providing and fixing in position soap dispensor made up of stainless
steel of approved make & quality.Dline Cat. Nos. ( 07.4062.02.004 ).
NO
NO
NO
134
Floor Traps
Providing & fixing C.I. Floor-traps of self-cleansing design with stainless
steel grating including cutting & making good the same for floors and
walls wherever necessary, complete in all respects as per directions.
NO
135
JET SPRAY
Providing hand facut cat no 577 of Jauquar /approved equivalent with all
accesories
URINAL (FLAT BACK) WITH FLUSH VALVE
Providing and fixing URINALS (CAT. NO.-OLYMPUS 96002) of
Hindustan Vitreous make of star white approved colour fixed as
specified in the architectural drawing. Along with battery operated
sensor concealed type flushing valve with installations box of JAGUAR
cat no- 51077 or approved equivalent. large flat back urinal of
HINDWARE or approved equivalent and sensor concealed type flushing
valve SENSOR of JAGUAR or approved equivalent. .The item to
including making of chases in the wall, fixing and making good the wall
etc.
UPVC PIPE
Suply, installation, testing and commissioning of 32 mm Ultra PVC pipes
with all accessories complete.
G.I. Pipes - concealed
Providing and fixing in position C Class tested galvanized iron pipes
conforming to IS 1239-1982 with all fittings like tees, bends, elbows,
reducers, unions, nipples etc /including concealing the pipes in walls or
under floors, including making chases in the walls, enwrapping the pipes
with Hessian cloth soaked in bitumen, fixing in the wall with M.S. clamps
and making good the wall surface / supporting on walls with thick M.S.
clamps including 3 coats of approved enamel paint/ etc complete
hydraulic testing after laying the pipes as specified including making
holes in the walls or floors as required and making good the same.
NO
NO
10
RMT
10
10
10
10
5
Rmt
Rmt
Rmt
Rmt
RMT
131
132
133
136
137
138
139
140
141
142
PAGE 26 OF 31
SR NO
QTY
UNIT
143
144
145
CI pipes-100 mm dia.
CI pipes-75 mm dia.
CI pipes-50 mm dia
C.I. special fittings
Supplying & fixing C.I. special fittings such as bends, tees, wyes, etc.
with or without access as directed such as tees, bends, off-sets with
lead caulked joints, complete in all respects as per directions.
20
20
10
Rmt
Rmt
RMT
146
147
148
149
10
10
10
1
No
No
No
NO
150
12
NO
NO
30
20
10
10
1
NO
NO
NO
NO
NO
151
152
153
154
155
156
PAGE 27 OF 31
SR NO
DESCRIPTION
157
Exhaust fan point
Exhaust Fan point controlled by one No. 6 Amp switch & 6A 5pin socket
near exhaust. fan
Circuit wiring
Supply & Laying of PVC insulated Copper wire drawn in heavy gauge
PVC conduits from distribution board to lighting switch boards/power
sockets including conduits & all required accessories.
158
159
160
161
162
163
164
165
166
167
168
169
170
171
Circuit wiring with One no. circuit of 2 x 2.5 + 1.5 sq.mm wire in 20mm
conduits.
Circuit wiring with Two no. circuit of 2 x 2.5 + 1.5 sq.mm wire in 25mm
conduits.
Circuit wiring with one no. circuit of 2 x 4.0 + 2.5 sq.mm wire in 25mm
conduits.
Circuit wiring with 5 no x 1.5 sqmm wire through 25 mm conduit
3C x 2.5 sqmm Cu flexible cable through raceways/conduits for power
points
Supply & Installation of wiring from monument box/ Switch socket outlets
to distribution board with 3core x 2.5 sq.mm copper wire drawn in under
floor raceways.
6A switch
Supply and Installation of 6 Amp single switch socket universal type
along with plate outlet with G.I. box recessed on partition/wall.
16A switch
Supply & Installation of 6/16 Amp switch socket universal type outlet
along with plate with G.I. box recessed on partition/wall.
6/16A along with SB
Supply & installation of 6/16A switch socket with universal pin along
with switch board
Work station points
Supply & Installation of group of plug points for computer with modular
type, 5pin 6Amp universal Socket x 3 Nos. + 6/16A universal socket
x 1no. to be installed on provided monument box /below table in partition
with 2nos. 16Amp switches (with indicator) to be installed recessed
on partition wall above table above side units with metal box .
20A industrial socket
Supply & Installation of 20 Amp Industrial type socket outlet with plug
top & 25 SP MCB recessed on partition / wall.
LIGHT FIXTURES
Supply & Installation of the following fixtures completely wired with
chokes, roller lock type holder, Lamps/ fluorescent tubes and chain
supports from ceiling wherever necessary.
Spot Light 2x 18 W
Recessed type spot light with 2 x 18 Watts CFL, Tulip Cat.ref. TPR 7163
with electronic ballast of Philips/atco/Helvar make
Spot Light 2x 18 W-Dimmable
Recessed type spot light with 2 x 18 Watts CFL, Tulip Cat.ref. TPR 7163
with electronic dimmable ballast of Helvar/approved equivalent make as
per attached specification
Spot light 2 x 18W
Recessed twin Tube dark lighter with 2 x 18watts CFL, TULIP Cat. Ref.
TPR 7165 with electronic ballast of Philips/atco/Helvar make
Spot light 2 x 18W
QTY
2
UNIT
NO
200
RMT
200
RMT
150
RMT
150
300
RMT
RMT
30
NO
20
NO
10
NO
10
NO
10
NO
20
NO
40
NO
15
NO
50
NO
PAGE 28 OF 31
SR NO
172
173
174
175
176
177
178
QTY
UNIT
15
NO
10
NO
20
NO
NO
40
NO
12
NO
NO
Exhaust fans
Providing and fixing of heavy duty Exhaust fans of window mounted type
with bird screen & louvered shutters 9 inch dia of approved make and
colour
Chandelier
Providing & fixing chandelier type light fixture of approved design of
approved make including lamp. (Basic rate Rs 20000)
Wall mounted picture light
Providing & fixing picture light of approved design & make with lamps (
Basic price Rs 3000)
LAN & TELEPHONE NETWORK
Supply, laying, connection (both end of cable RJ 45, socket or jack to
crimping), testing and commissioning of LAN system as given below.
Cable to be laid through under floor trunking / PVC pipe/ metal cable tray
and payment will be made in the respective items.Rate quoted for LAN
network shall include the various testing procedure for the certification of
th system and the agency to provide the certification for system.
NO
15
NO
181
182
700
80
RMT
No
183
20
No
184
185
186
20
20
125
No
No
RMT
179
180
PAGE 29 OF 31
SR NO
UNIT
500
100
10
15
50
RMT
RMT
RMT
RMT
NO
20
No
NO
15
NO
300
1
RMT
No
20
20
20
RMT
RMT
RMT
700
RMT
201
DESCRIPTION
Rate quoted for the following items shall be including supply, laying,
connecting, testing and commissioning of telephone points with ferrule/
tag marking of telephone points to lay from DB (krone connector) to
receiver with appropriate size of unarmored cable as per line diagram
and specification with all necessary fittings to be laid through under floor
trunking or through PVC pipe all complete and will be paid in the
respective items.
Cat. 5 cable from telephone outlet to telephone junction box
2 pair telephone cable of 0.5 sqmm of approved make
20 pair, telephone cable
50 pair, telephone cable
Dual telephone socket to be mounted on provided monument box along
with faceplate.
Single telephone socket to be mounted on partition/wall with concealed
metal box along with faceplate.
Supply & installation of telephone junction box with enclosure :
With 30 pair crone connector
Supply & Installation of following, for Cable TV System
Co-axial TV socket with plate to be mounted on partition/wall with
concealed metal box.
RG11 co-axial cable in provided u/f trunking /conduit.
3way-4way splitters for Cable-TV distribution for the floor
Supply & laying of heavy gauge PVC conduits with required accessories
for LAN/ telephone/computer/ TV system in partition/above false ceiling
as per site requirement.
20mm PVC conduit
25mm PVC conduit
32mm PVC conduit
UNDER FLOOR RACEWAYS & ACCESSORIES
Supply and installation, of under floor raceways & accessories including
floor cutting, chiseling and necessary Civil work as per approval of
Architect/Consultant.
80mm wide, 38mm deep single Compartment, 16 SWG, Aluminum
extruded section for under floor raceways (rectangular shape).
200mm x 200mm x 42mm, 14 SWG G.I. Junction Box with G.I. cover.
15
No
202
280mm x 280mm x 42mm, 14 SWG G.I. Junction Box without G.I. cover.
10
No
203
204
20
20
No
No
10
No
100
NO
SQM
Wooden Shelves
30
SQM
187
188
189
190
191
192
193
194
195
196
197
198
199
200
205
206
207
208
PAGE 30 OF 31
SR NO
209
210
QTY
UNIT
50
SQM
3 Form partition
Providing 3 form varia of 10 mm thickness of make Hounterdouglas or
approved equivalent of basic rate Rs 17000 per smt on partition,
ceilingor wall etc complete as per manufactures specification.The
variant/shade/theme will be selected during the execution by HPCL.
20
SQM
PAGE 31 OF 31