This document outlines the ASTM A 421 standard specification for uncoated stress-relieved steel wire used for prestressed concrete. It includes two tables that specify the minimum tensile strength and yield strength requirements for different wire diameters and types. Tensile strength must be at least 1620-1725 MPa, while yield strength is a minimum of 1377-1465 MPa at 1% extension, depending on the diameter and wire type.
This document outlines the ASTM A 421 standard specification for uncoated stress-relieved steel wire used for prestressed concrete. It includes two tables that specify the minimum tensile strength and yield strength requirements for different wire diameters and types. Tensile strength must be at least 1620-1725 MPa, while yield strength is a minimum of 1377-1465 MPa at 1% extension, depending on the diameter and wire type.
This document outlines the ASTM A 421 standard specification for uncoated stress-relieved steel wire used for prestressed concrete. It includes two tables that specify the minimum tensile strength and yield strength requirements for different wire diameters and types. Tensile strength must be at least 1620-1725 MPa, while yield strength is a minimum of 1377-1465 MPa at 1% extension, depending on the diameter and wire type.
Nominal Diameter, Tensile Strength, min, MPa (psi) Type BA Type WA mm (in.) A 1725 (250 000) 4.88 (0.192) 4.98 (0.196) 1655 (240 000) 1725 (250 000) 6.35 (0.250) 1655 (240 000) 1655 (240 000) 7.01 (0.276) 1620 (235 000) 1620 (235 000) This size is not commonly furnished in Type BA wire.
TABLE 2 Yield Strength Requirements
Nominal Diameter, Initial Stress, Minimum Stress at 1% Extension, MPa (psi) mm (in.) MPa (psi) Type BA Type WA A 4.88 (0.192) 200 (29 000) 1465 (212 500) 4.98 (0.196) 200 (29 000) 1407 (204 000) 1465 (212 500) 6.35 (0.250) 200 (29 000) 1407 (204 000) 1407 (204 000) 7.01 (0.276) 200 (29 000) 1377 (199 750) 1377 (199 750) A This size is not commonly furnished in Type BA wire.