Professional Documents
Culture Documents
Force On Materials 3
Force On Materials 3
SINGLE SHEAR
"Single
DOUBLE SHEAR
"Double
SHEAR STRESS,
If
=.
If
N/m2
The
Load
SHEAR STRAIN,
x
The
=.
Stress producing
it.
The Ratio
is called the
Modulus of Rigidity and is
G=
denoted by G.
Unit
EXERCISE 2
1. What is the tensile force required to reduce the
diameter of a steel bar from 40 mm to 39.95
mm. Given E = 200 GN/m2 and = 0.3.
2. A 2.5 m rod with cross sectional area of 1290
mm2 extends by 1.5 mm when applied with a
tensile force of 142 kN. Determine:a. Draw free body diagram for the above question.
b. Calculate tensile stress in the rod.
c. Strain.
d. Youngs Modulus.
e. Factor of safety if the maximum allowable stress
(or ultimate stress) is 432 MN/m2.