Professional Documents
Culture Documents
Project Description
The proponents of this project
aim to build a seismograph using a
vibration sensor, microcontroller and
myDAQ (data acquisition device). The
output will be an analog waveform
that will be displayed using LabVIEW
software.
The Vibration module based on
the vibration sensor, SW-420, and
comparator LM393 are used to detect
if there is any vibration beyond the
threshold. The threshold can be
adjusted by the on-board
potentiometer.
When there is no vibration, this
module output logic LOW using an LED
light as an indicator and vice versa.
When no vibration or tilt, the
product is ON conduction state, and in
the steady state, when a vibration or