Professional Documents
Culture Documents
3g Commisioning Process
3g Commisioning Process
Basic IP in Lap-
169.254.1.2
255.255.0.0
Open HyperTerminal
$ reload space -- enter
$ formathd space /c2 enter
$ formathd space /d enter
$ reload space -- enter
$ ifconfig space le0 space 169.254.1.1 space netmask space 255.255.0.0 enter
$ ifconfig enter
$ passwd enter
$ rbs enter
Now minimize HyperTerminal
After that open WS FTP, Enter passwd and open
Now from Initial CV in Laptop in C Drive select c2 and d and transfer in remote
system.
In Remote system before transfer check that data will move on whole memory
not in c2 or d only for this check in remote system address bar there is \
present.
After transferring intial cv check vols by hyperterminal,vols will be 3M and 4M.
Now go in UP folder located in C drive , copy path in address bar of SW load file
of %5 folder.
In HyperTerminal
$ reload space enter
$ ifconfig space le0 space 169.254.1.1 space netmask space 255.255.0.0 enter
$ reload enter
Wait for some time
Now open http://169.254.1.1
Go in Configuration --- cabinet equipment --- next --- next --- next --- rbs 3967 -- no of rus in sector 1 1 1 --- next --- next --- next ---yes
For P6
Now open http:// 169.254.1.1
Go in software --- upgrade pacakage --- right click --- create --- user label rbs
ftp server add- 169.254.1.2
user rbs
passwd rbs
ftp server path- [ ./ paste path of %9 file located in %9 folder in up
folder in c drive .xml ]
in addition this we also open Bulletprof FTP server.
Open BP FTP Server --- then click on single person(user) --- in user accounts
window --- right click --- add --- in account name type rbs ok --- now in setup
window --- right click --- select location of %9 folder --- tick on all --- ok --- in
passwd- type rbs --- ok --- now give online command
After this again go in Element manager window and click on Create pacakage -- install pacakage --- full install --- after some time Verify Pacakage --- upgrade
node --- hard upgrade --- wait for some time.