Professional Documents
Culture Documents
College of Engineering
Measurement systems
Time: 50 min
ID#:
R 1.68e
1 1
3050
298
-5.12 V
supply
ii.
Design the amplifier such that the output voltage range of the amplifier is
0-10 volt .[2]
iii.
b) Select an analog to digital convertor (ADC) for this system with maximum
quantization error 0.01 volt. Note that the available ADCs types are 8, 10, and 12
bit. [2]
3) In a system, the sensor output range is 0-10Volts and varies with a frequency range 02 Hz, design a low pass filter to meet the following specifications:[3]
a. The change in the signal when it passes through the filter must be 1% .
b. The filter response time must be 0.5 sec.