Professional Documents
Culture Documents
The Bandwidth of U600 Mastergroup Is
The Bandwidth of U600 Mastergroup Is
yr/sec ________
Date ____________
C. 8 khz
D. 6 khz
13. CCITTs supermastergroup has how many voiceband channels?
A. 600
B. 1800
C. 10800
D. 900
14. The transparency mechanism used with SDLC is called
A. Zero-bit insertion
B. Modified link test
C. Beacon test
D. Invert-on-zero coding
15. What equation defines the composition of an ISDN basic access line?
A. 2B + D
B. B + D
C. B + 2D
D. 2B + 2D
16. A digital network where voice, video, text and data are multiplexed into a single
network for processing and are transmitted prior to use.
A. Frame relay
B. Asynchronous transfer mode (ATM)
C. ISDN
D. Synchronous digital hierarchy (SDH)
17. T-1 carrier service has _____ digital bit rate.
A. 1.544 Mbps
B. 2048 Mbps
C. 1.644 Mbps
D. 9600 kbps
18. Non-ISDN equivalent can be connected to ISDN line by the use of _____.
A. Terminal equipment
B. Terminal adapters
C. Modem
D. Network adaptors
19. What is the baseband frequency of standard FDM basic supergroup?
A. 312 to 552 khz
B. 60 to 2540 khz
C. 60 to 108 khz
D. 300 to 600 khz
20. What is the transmission signal coding for T1 carrier?
A. Binary
B. NRZ
C. Bipolar
D. Manchester
21. The primary purpose of the data modem.
A. Interface analog terminal equipment to analog communications channel
B. Interface digital terminal equivalent to digital communications channel
C. Interface analog terminal equipment to digital communications channel
D. Interface digital terminal equipment to analog communications channel
22. The line control unit (LCU) operates on the data in digital form.
A. Data terminal equipment (DTE)
B. Data communications equipment (DCE)
C. Modem
D. UART
23. SYN character of EBCDIC code
A. 32 H
B. 8 H
C. 16 H
D. 4 H
24. _______ ensures that the transmitter and receiver agree on prescribed time slot for
the occurrence of a bit.
A. Bit or clock synchronization
B. Modem or carrier synchronization
C. Character synchronization
D. Message synchronization
25. Equation used to determine the number of Hamming bits in the Hamming code.
A.
B.
C.
D.
26. Data means
A. Digital information
B. Both digital and analog
C. Analog information
D. Neither digital nor analog
27. What determines which network configuration is most appropriate?
A. Application Layer
B. Presentation Layer
C. Network Layer
D. Data link layer
28. Ethernet is a baseband system using CSMA/CD operating at _________.
A. 10 Mbps
B. 20 Mbps
C. 30 Mbps
D. 40 Mbps
29. Mechanism used by a station to gain access to local area network.
A. Channel Multiplexing
B. Channel accessing
C. CSMA/CD
D. CSMA/CA
30. What multiplexing scheme is used by baseband transmission?
A. TDM
B. Space multiplexing
C. FDM
D. Statistical multiplexing
31. Use of coaxial cables in interconnecting networks is limited to an overall length of
_______.
A. 1500 Ft
B. 1500 m
C. 1500 km
D. 1500 kft
32. What identifies how the stations are interconnected in a network?
A. Topology
B. Architecture
C. Topology or Architecture
D. Topology and Architecture
33. ______ is a data communications network designed to provide two-way
communications between a large variety of data communications terminal equipment
within a relatively small geographic area.
A. Private Area Network
B. Local Area Network
C. Wide Area Network
D. Ethernet
34. ______ is the mode of transmission in public data network in which data is transferred
from source to the network then to the destination in an asynchronous data format.
A. Synchronous mode
B. Start/stop mode
C. Packet mode
D. Circuit mode
35. A seven-bit character can represent one of ______ possibilities.
A. 7
B. 14
C. 64
D. 128
36. _____ is defined to be the maximum rate at which information can be transmitted
through a channel
A. Bit rate
B. Baud rate
C. Coding
D. Channel Capacity
37. Circuit that performs the inverse mapping and delivers to the user destination, a
reproduction of the original digital source output.
A. Source coding
B. Channel coding
C. Inverse coding
D. Demodulation
38. Digital Modulation technique used in modems
A. ASK
B. FSK
C. PSK
D. MSK
39. Who developed the Fixed-length binary code for telegraphy
A. Samuel Morse
B. Emile Baudot
C. Alexander Graham Bell
D. Guglielmo Marconi
40. Inventor of Push-code modulation for the digital encoding of speech signals.
A. R.V.L. Hartley
B. J.R. Carson
C. H. Nyquist
D. Alex Reeves
41. In what year did computers and terminals start communicating with each other over
long distance?
A. 1950s
B. 1960s
C. 1970s
D. 1980s
42. Store-and-forward multiple-access network.
A. ARPANET
B. ALOHA
C. PRNET
D. Packet switching
43. A source code whose average world length approaches the fundamental limit set by
the entropy of a discrete memory less source.
A. Prefix code
B. Source code
C. Entropy code
D. Huffman code
44. Who promulgate communications related military standards (MIL-STD)?
A. DOD
B. DCA
C. DOD-STD
D. ANSI-MIL
45. What is the class of probability in error detection techniques that is known as
residual error rate?
A. P1
B. P2
C. P3
D. P4
46. RS 232 is normally an interface between DTE and DCE, What is its signal rate?
A. 20 kbps
B. 30 kbps
C. 40 kbps
D. 50 kbps
47. Digital switching concepts that can handle more channels.
A. SDS
B. TSI
C. TDM
D. TMS
48. What is the most significant advantage of modulator switch than time-and-space
switch?
A. Flexible size
B. Simplified control
C. Simplified manufacturing, testing and maintenance
D. The latter is more advantageous than the former
49. Which of the following is the biggest disadvantage of PCM systems?
A. Inability to handle analog signals
B. High error rate as a result of quantizing noise
C. Not compatible with TDM
D. The large bandwidth required
62. A process where the higher amplitude analog signals are compressed prior to
transmission then expanded at the receiver.
A. Compressing
B. Expanding
C. Encoding
D. Companding
63. For a resolution of 0.01 V and analog sample voltage of 0.05 V, the 12-bit linear signmagnitude code is
A. 000000000101
B. 100000000101
C. 100010010011
D. 000001010001
64. _____ uses a single bit PCM code to achieve a digital transmission of analog signal
A. Quadrature Amplitude Modulation (QAM)
B. Frequency shift keying (FSK)
C. Delta Modulation (DM)
D. Phase Modulation (PM)
65. The line speed of Bell System T1 carrier system is
A. 64 kbps
B. 3.152 Mbps
C. 1.544 Mbps
D. 6.312 Mbps
66. How many Channels does a T2 line carry?
A. 24
B. 48
C. 96
D. 672
67. The capacity standard 4khz telephone channel with 30 dB S/N is
A. 455225 bps
B. 42525 bps
C. 39846 bps
D. 39840 bps
68. How many channels does a super group have?
A. 60
B. 600
C. 1800
D. 10800
69. The output frequency at the channel combiner of channel 7 is
A. 76 80 kHz
B. 80 -84 kHz
C. 84 88 kHz
D. 88 92 kHz
70. The carrier frequency of the supergroup D25 is
A. 2652 kHz
B. 2900 kHz
C. 2356 kHz
D. 2108 kHz
71. Which of the following is not a hybrid data?
A. Data in voice
B. Data under voice
C. Data above voice
D. Data in video
72. _____ was the first fixed-length 5-bit character code.
A. EBCIDIC
B. ASCII
C. Morse Code
D. Baudot Code
73. CCIT V.26 modem has a modulation rate of ____.
A. 1200 Hz
B. 1200 Bauds
C. 1560 cps
D. 9600 bauds
74. What can a smart modem do?
A. Detect transmission errors and correct them automatically
B. Correct answer multiple choice quizzes
C. Accepts command from the terminals via RS232 interface
D. Do a smart Game
75.
76.
77.
78.
79.