Professional Documents
Culture Documents
O00096
N1 (G72 ROUGHING FACE)
N2 G53 G00 X0. Z0. T0 (Sending home for a tool change)
N3 T101 (O.D. TOOL x .031 TNR) (Select Tool 1 Offset 1)
N4 G50 S3000
N5 G97 S450 M03
N6 G54 G00 X3.1 Z0.1 M08 (Rapid to start point above part stock)
N7 G96 S370
N8 G72 P9 Q18 U0.01 W0.01 D0.06 F0.012 (G72 Rough Facing Cycle with
TNC)
N9 G41 G00 Z-1.6 (Starting sequence number defined by P8 in G72 and
G70)
N10 G01 X2. F0.008
N11 X1.4 Z-0.9
N12 X1.
N13 Z-0.6
N14 G03 X0.8 Z-0.5 R0.1
N15 G01 Z-0.1
G-Codes
G00 Rapid traverse motion.
G01 Linear interpolation motion.
G03 Circular Interpolation Counterclockwise.
G41 Tool Nose Compensation LEFT of the programmed path.
G40 Tool Nose Compensation CANCEL.
G50 Spindle Maximum RPM Limit.
G53 Machine Zero Positioning Coordinate Shift.
G54 Work Offset Positioning Coordinate #1 (Setting 56)
G72 End Face Stock Removal Cycle.
G70 Finishing Cycle.
G96 Constant Surface Speed On.
G97 Constant Surface Speed Cancel.
M-Codes