Professional Documents
Culture Documents
S 1320 1336 1340 PDF
S 1320 1336 1340 PDF
1320/1336/1340
General Service Braided Graphited Packings
Product Description
John Crane styles 1320, 1336, and 1340 are cost effective
graphited general service packing constructed of the
highest quality synthetic fibers and lubricants. These
products are designed to handle a wide range of fluids at
moderate-to-high temperatures, pressures, and shaft
speeds.
These packings are thoroughly impregnated with
lubricants to fill braided voids in order to reduce product
penetration. An external graphite coating is added for
lubricity and to enhance heat dissipation for increased
packing life.
Construction/Features
Interlace Braid
Available Sizes: fraction and
millimeter.
1320
Cotton fibers treated with a
proprietary blend of petroleumbased lubricants plus an external
coating of graphite.
1340 shown
Performance Capabilities
1336
Spun synthetic fibers thoroughly
impregnated with PTFE dispersion,
general-service compatible, plus an
exterior coating of graphite for
enhanced lubricity and heat
dissipation.
1340*
Spun synthetic fibers treated with a
proprietary blend of petroleumbased lubricants plus an external
coating of graphite.
Temperature:
1320
1336/1340
Pressure:
1320 Pump
1320 Valve
Up to 7 bar/100 psi
Up to 34 bar/500 psi
Speed:
1320
1336
1340
pH Range:
1320
1336
1340
6 to 8
2 to 12
4 to 10
Industries Served
Agriculture
General Industry
Marine
Municipal Waste & Water
*Rite-Pak packing is available in standard A, B, & C box sizes in fraction sizes 1/8" thru 1".
*Rite-Pak is a registered trademark of John Crane Inc.
1320/1336/1340
General Service Synthetic Braided Packings
Applications
Standard Sizes
Typical Equipment
North America
Morton Grove, Illinois USA
Europe
Slough, UK
Latin America
So Paulo, Brazil
1-800-MGPAKIT (1-800-647-2548)
Tel: 1-800-221-7833
Fax: 1-847-967-3513
Tel: 44-1753-224000
Fax: 44-1753-224224
Tel: 55-11-3371-2500
Fax: 55-11-3371-2599
Tel: 971-4-3438940
Fax: 971-4-3438970
For your nearest John Crane facility, please contact one of the locations above.
If the products featured will be used in a potentially dangerous and/or hazardous process, your John Crane representative should be consulted prior to their selection and use.
In the interest of continuous development, John Crane Companies reserve the right to alter designs and specifications without prior notice. It is dangerous to smoke while handling products made from PTFE. Old and new PTFE products must not be incinerated.
2008 John Crane Inc. Print 02/08
www.johncrane.com
S-1320/1336/1340