You are on page 1of 12

PTC Authorized Training Center Creo 2.

0 (Pro/E)

CETPA INFOTECH PVT. LTD.


Toll-Free: 1800-102-4262

www.cetpainfotech.com

query@cetpainfotech.com

Creo (Pro/E) For Design Engineers & Industrial Designers


(Creo 2.0)

Basic Solid Part Modeling

Basic Assembly Creation

Advanced Datum Features


Relations and Parameters
Advanced Blends
Variable Section Sweeps
Swept Blends
Family Tables
Reusing Features

Flexible Modeling

Assembling with Constraints


Exploding Assemblies
Using Layers
Managing Design Intent
Resolving Failures and Seeking Help

Adv Solid Part Modeling

Introduction to the Creo Basic Modeling Process


Understanding Creo Concepts
Using the Creo Interface
Selecting and Editing
Creating Sketcher Geometry
Using Sketcher Tools
Creating Sketches for Features
Creating Datum Features: Planes and Axes
Creating Extrudes, Revolves, and Ribs
Creating Sweeps and Blends
Creating Holes, Shells, and Draft
Creating Rounds and Chamfers
Copy and Mirror Tools
Creating Patterns
Measuring and Inspecting Models

Introduction to Flexible Modeling


Editing, Transformations in Flexible Modeling
Recognition in Flexible Modeling

Adv Assembly Design

Using Advanced Assembly Constraints


Creating and Using Component Interfaces
Creating and Using Flexible Components

www.cetpainfotech.com

query@cetpainfotech.com

Replacing Components in an Assembly


Understanding the Basics of Simplified Reps
Creating Cross-Sections, Display Styles and combined Views

Creating and Using Assembly Structure and Skeletons

Sheetmetal Design

Detailing (Drawing)

Surface Modeling Overview


Advanced Selection
Basic Surfacing Tools
Helical Sweeps
Creating and Editing Solids using Quilts

Freeform Surface Design

Introduction to Drawings
Creating New Drawings
Creating Drawing Views
Adding Model Details to Drawings
Adding Notes to Drawings
Adding Tolerance Information
Adding Draft Geometry and Symbols
Using Layers in Drawings
Using Report Information in Drawings
Using Report Information in Drawings

Surface Modeling

Introduction to the Creo Sheetmetal Design Process


Sheetmetal Model Fundamentals
Creating Primary Sheetmetal Wall Features
Creating Sheetmetal Secondary Wall Features
Modifying Sheetmetal Models
Sheetmetal Bends and Setting Up the Sheetmetal Environment

Introduction to the Freeform Surface Modeling Process


Understanding Freeform Surface Modeling Concepts
Creating Initial Freeform Curves
Developing Freeform Surface Models

Direct Modeling

Introduction to Creo Direct & Creating Sketches in 2-D Mode


Creating Features & Assemblies in Creo Direct
Selecting, Modifying and Reusing 3-D Geometry in Creo Direct

www.cetpainfotech.com

query@cetpainfotech.com

Basic Solid Part Modeling


Understanding Creo Concepts
Understanding Solid Modeling Concepts
Understanding Feature-Based Concepts
Understanding Parametric Concepts
Understanding Associative Concepts
Understanding Model-Centric Concepts
Recognizing File Extensions
Using the Creo Interface
Understanding the Main Interface
Understanding the Folder Browser
Understanding the Window Menu
Setting the Working Directory and Opening and Saving Files
Managing Files in Creo
Understanding Basic Display Options
Creating and Managing View Orientations
Managing and Editing Appearances
Setting Up New Part Models
Selecting and Editing
Understanding Creo Basic Controls
Using Drag Handles
Understanding the Model Tree
Selecting Items using Direct Selection
Selecting Items using Query Selection
Understanding Selection Filters
Utilizing Undo and Redo Operations
Editing Features and Regenerating
Activating and Editing Models
Using Dynamic Edit
Deleting and Suppressing Items
Creating Sketcher Geometry
Reviewing Sketcher Theory
Understanding Design Intent
Utilizing Constraints
Sketching Lines
Sketching Centerlines
Sketching Rectangles and Parallelograms
Sketching Circles
Sketching Arcs
Using Sketcher Tools
Understanding Construction Geometry Theory
Using Geometry Tools within Sketcher

www.cetpainfotech.com

query@cetpainfotech.com

Dimensioning Entities within Sketcher


Modifying Dimensions within Sketcher
Sketcher Conflicts
Creating Sketches for Features
Creating Sketches ('Sketch' Feature)
Specifying the Sketch Setup
Using Entity from Edge within Sketcher
Thickening Edges
Creating Datum Features: Planes
Creating Datum Features Theory
Creating Datum Planes
Creating Extrudes, Revolves, and Ribs
Creating Solid Extrude Features
Common Dashboard Options: Extrude Depth
Common Dashboard Options: Feature Direction
Common Dashboard Options: Thicken Sketch
Creating Solid Revolve Features
Common Dashboard Options: Revolve Angle
Creating Profile Rib Features
Creating Sweeps and Blends
Creating Sweeps with Open Trajectories
Creating a Parallel Blend Protrusion or Cut
Creating Holes, Shells, and Draft
Common Dashboard Options: Hole Depth
Creating Linear Holes
Creating Radial and Diameter Holes
Creating Shell Features
Creating Draft Features
Creating Basic Split Drafts
Analyzing Draft Hinges and Pull Direction
Creating Rounds and Chamfers
Creating Rounds Theory
Creating Rounds by Selecting Edges
Creating Rounds by Selecting Two Surfaces
Creating Full Rounds
Creating Chamfers by Selecting Edges
Analyzing Basic Chamfer Dimensioning Schemes
Copy and Mirror Tools
Copying and Pasting Features
Moving and Rotating Copied Features
Mirroring Selected Features

www.cetpainfotech.com

query@cetpainfotech.com

Creating Patterns
Direction Patterning in the First Direction
Axis Patterning in the First Direction
Creating Reference Patterns of Features
Measuring and Inspecting Models
Viewing and Editing Model Properties
Investigating Model Units
Analyzing Mass Properties
Measuring Models
Creating Planar Part Cross-Sections
Measuring Global Interference

Basic Assembly Creation


Assembling with Constraints
Understanding Assembly Theory
Creating New Assembly Models
Understanding Constraint Theory
Assembling Components using the Default Constraint
Constraining Components using Insert
Constraining Components using Mate Coincident
Constraining Components using Align Coincident
Constraining Components using Align and Mate Offset
Constraining Components using Align and Mate Angle
Exploding Assemblies
Creating and Managing Explode States
Using Layers
Understanding Layers
Creating and Managing Layers
Utilizing Layers in Part Models
Managing Design Intent
Reordering Features
Inserting Features
Redefining Features and Sketches
Resolving Failures and Seeking Help
Understanding and Identifying Failures
Analyzing Geometry Failures
Analyzing Open Section Failures
Understanding Resolve Mode Tools
Recovering Models
Using Creo Help

www.cetpainfotech.com

query@cetpainfotech.com

Adv Solid Part Modeling


Advanced Datum Features
Creating Datum Graphs
Creating Datum Coordinate Systems
Creating Points On or Offset from Entities
Creating Points using an Offset Coordinate System
Sketching Geometry Datums
Creating a Curve Through a Point Array
Creating a Curve From File
Creating a Curve From Equation
Creating Composite Curves
Creating a Curve at Surface Intersection
Trimming Curves
Creating Offset Curves
Relations and Parameters
Understanding Relation Theory
Understanding Relation Types
Understanding Basic Relation Operators and Functions
Understanding Advanced Relation Operators and Functions
Exact Relation
Creating Parameters
Creating Relations
Creating Relations for Patterns
Advanced Blends
Understanding Rotational and General Blend Theory
Creating a Rotational Blend Protrusion or Cut
Creating a General Blend Protrusion or Cut
Analyzing General Blend Attributes
Variable Section Sweeps
Understanding Variable Section Sweep Theory
Creating Variable Section Sweeps using a Constant Section
Creating Variable Section Sweeps Normal to Trajectory
Creating Variable Section Sweeps Normal to Projection
Creating Variable Section Sweeps Utilizing Multiple Trajectories
Swept Blends
Understanding Swept Blend Theory
Creating Swept Blends by Selecting Sections
Creating Swept Blends by Sketching Sections
Analyzing Swept Blend Section Options
Analyzing Swept Blend Rules

www.cetpainfotech.com

query@cetpainfotech.com

Family Tables
Understanding Family Table Theory
Creating a Family Table
Creating a Multi-Level Family Table
Reusing Features
Creating UDFs
Placing UDFs

Adv Assembly Design


Using Advanced Assembly Constraints
Constraining Components using Tangency
Constraining Components using Pnt on Line
Constraining Components using Pnt on Surf
Constraining Components using Edge on Surf
Constraining Components using Fix
Creating and Using Component Interfaces
Understanding Component Interfaces
Using a Placing Component Interface
Using a Receiving Component Interface
Creating and Using Flexible Components
Adding Flexibility to a Component
Placing Flexible Components in an Assembly
Replacing Components in an Assembly
Understanding Component Replace
Replacing Components using Family Table
Understanding the Basics of Simplified Reps
Understanding Standard Simplified Reps
Understanding Custom Simplified Reps
Excluding Components using Simplified Reps
Creating Cross-Sections, Display Styles and Combined Views
Understanding Assembly Cross-Sections
Creating Display Styles
Creating Combination Views
Creating and Using Assembly Structure and Skeletons
Understanding Skeletons
Creating Assembly Structure
Creating Skeletons for Space Claims
Creating Skeletons for Placement References
Copying a Model to a Skeleton

www.cetpainfotech.com

query@cetpainfotech.com

Creating Multiple Skeletons


Sharing Skeleton Geometry
Creating and Placing Models using Skeleton References

Sheetmetal Design
Introduction to the Creo Sheetmetal Design Process
Creo Sheetmetal Design Process
Sheetmetal Model Fundamentals
Sheetmetal Model Fundamentals
Understanding Developed Length
Creating a New Sheetmetal Part in Assembly Mode
Creating a New Sheetmetal Model in Part Mode
Converting a Solid Model to a Sheetmetal Model
Creating Primary Sheetmetal Wall Features
Understanding Sheetmetal Wall Features
Creating Flat Walls
Extruded Sheetmetal Wall Features
Revolved Sheetmetal Wall Features
Sheetmetal Wall Sketching Tools
Creating Sheetmetal Secondary Wall Features
Understanding Secondary Walls
Creating Secondary Flat Walls
Using Flange Walls
Using Extruded Walls
Wall Dashboard Options
Understanding Relief
Modifying Sheetmetal Models
Bends
Bend Options
Unbend Features
Bend Back Features
Flat Pattern
Sheetmetal Cuts
Die Form Features
Punch Form Features
Rip
Sheetmetal Bends and Setting Up the Sheetmetal Environment
Order of Bend Features
Fixed Geometry
Flat States

www.cetpainfotech.com

query@cetpainfotech.com

Detailing (Drawing)
Introduction to Drawings
Understanding Drawing Concepts
Drawing Development Process
Understanding the Drawing Ribbon User Interface
Exploring Drawing Ribbon Commands
Creating New Drawings
Creating Drawings Using Formats and Sheets
Creating Drawing Views
Adding General Views
Adding Projection Views
Editing Drawing Views
Editing Visible View Area
Adding Detailed Views
Adding 2-D Cross-Section Views
Modifying Cross Hatching Display
Adding Assembly Exploded Views
Adding Model Details to Drawings
Understanding Annotations in Drawings
Showing, Erasing, and Deleting Annotations
Adjusting Dimensions and Detail Items
Changing Dimension Display
Adding Notes to Drawings
Adding and Editing Notes
Adding Tolerance Information
Understanding Dimensional Tolerances
Understanding Geometric Tolerances
Setting Up Geometric Tolerance References
Applying Geometric Tolerances
Adding Draft Geometry and Symbols
Using Surface Finish Symbols
Using the Symbol Palette and Custom Symbols
Using Layers in Drawings
Understanding Layers in Drawings
Using Layers in Drawings
Creating and Using Tables in Drawings
Creating and Configuring Tables

www.cetpainfotech.com

query@cetpainfotech.com

Using Report Information in Drawings


Creating Report Tables
Using BOM Balloons

Surface Modeling
Surface Modeling Overview
Introduction to Surfacing
Surface Modeling Uses
Surface Modeling Paradigms
Freeform Overview
Blending Surface Modeling Paradigms
Surfacing Terms
Advanced Selection
Advanced Chain Selection
Advanced Surface Selection
Basic Surfacing Tools
Creating Surface Extrude Features
Creating Surface Revolve Features
Creating Fill Surfaces
Creating Sweep Surfaces with Open Trajectories
Creating Parallel Blend Surfaces
Creating General Blend Surfaces
Helical Sweeps
Understanding Helical Sweeps Theory
Utilizing Helical Sweeps for Surfaces
Creating and Editing Solids using Quilts
Thickening Surface Quilts
Solidifying Quilts to Add Material
Solidifying Quilts to Remove Material
Solidifying Quilts to Replace Material
Offsetting Surfaces using the Replace Option

Free Form Surface Design


Introduction to the Freeform Surface Modeling Process
Introduction to Freeform Surface Modeling
Typical Creo (Pro/E) Freeform Modeling Process
Understanding Freeform Surface Modeling Concepts
Understanding Style Features
Understanding the Style Modeling Environment

www.cetpainfotech.com

query@cetpainfotech.com

Using Style Tool Shortcut Menus


Using Style Tool Key Combinations
Understanding Active Planes
Creating Initial Freeform Curves
Understanding Style Curves
Creating Basic Style Curves
Defining Endpoint Tangency
Editing Curves
Analyzing Curves
Developing Freeform Surface Models
Understanding Style Surfaces
Creating Boundary Surfaces
Creating Loft Surfaces
Creating N-Sided Surfaces

Direct Modeling
Introduction to Creo Direct & Creating Sketches in 2-D Mode
Understanding the User Interface
Orienting and Positioning the Model
Understanding 2-D Mode
Using the Line-Arc Chain Tool
Sketching Rectangles, Circles and Arcs
Understanding Direct Modeling
Trimming Sketched Entities
Creating Features & Assemblies in Creo Direct
Understanding Sketches and Regions
Creating Extrusions
Revolving Sketches
Creating Holes
Creating Rounds and Chamfers
Assembling Components
Selecting, Modifying and Reusing 3-D Geometry in Creo Direct
Understanding Selection Filters
Using Shape Selection
Understanding the CoPilot
Using the Move/Rotate Operation
Editing Round
Removing Surfaces From a Solid

www.cetpainfotech.com

query@cetpainfotech.com

You might also like