Professional Documents
Culture Documents
Hitachi Tiered Storage Manager For Mainframe Messages
Hitachi Tiered Storage Manager For Mainframe Messages
Document Organization
Product Version
Getting Help
Contents
MK-92HC210-01
ii
Hitachi Tiered Storage Manager for Mainframe Messages
Contents
Preface...................................................................................................v
Intended audience.................................................................................................... vi
Product version......................................................................................................... vi
Release notes........................................................................................................... vi
Document revision level.............................................................................................vi
Document organization..............................................................................................vi
Related documents...................................................................................................vii
Document conventions.............................................................................................viii
Conventions for storage capacity values......................................................................ix
Accessing product documentation...............................................................................ix
Getting help..............................................................................................................ix
Comments.................................................................................................................x
1 Messages............................................................................................. 1-1
iii
Hitachi Tiered Storage Manager for Mainframe Messages
iv
Hitachi Tiered Storage Manager for Mainframe Messages
Preface
This document describes the messages and error codes that are output by
the following program products.
- Hitachi Tiered Storage Manager for Mainframe
Hereafter, the above product is simply called Tiered Storage Manager for
Mainframe.
This preface includes the following information:
Intended audience
Product version
Release notes
Document revision level
Document organization
Related documents
Document conventions
Conventions for storage capacity values
Accessing product documentation
Getting help
Comments
Preface
Hitachi Tiered Storage Manager for Mainframe Messages
Intended audience
This document is intended for those who:
Want to create a storage system that uses Tiered Storage Manager for
Mainframe, and to operate the system at high performance.
This manual assumes that the reader has the following knowledge:
Product version
This document revision applies to Hitachi Tiered Storage Manager for
Mainframe version 8.0.0 or later.
Release notes
Read the release notes before installing and using this product. They may
contain requirements or restrictions that are not fully described in this
document or updates or corrections to this document.
Date
Description
MK-92HC210-00
July 2013
Initial Release
MK-92HC210-01
April 2014
Document organization
The following table provides an overview of the contents and organization of
this document. Click the chapter title in the left column to go to that chapter.
The first page of each chapter provides links to the sections in that chapter.
Chapter/Appendix
vi
Description
Chapter 1, Messages on
page 1-1
Chapter 2, Storage
system sense byte
information on page 2-1
Preface
Hitachi Tiered Storage Manager for Mainframe Messages
Related documents
A manual and document related to Tiered Storage Manager for Mainframe:
Preface
Hitachi Tiered Storage Manager for Mainframe Messages
vii
Document conventions
This document uses the following typographic conventions:
Convention
Description
Bold
Italic
Monospace
[ ] square
brackets
{ } braces
| vertical bar
viii
Label
Description
Note
Tip
Caution
WARNING
Preface
Hitachi Tiered Storage Manager for Mainframe Messages
Value
1 kilobyte (KB)
1 megabyte (MB)
1 gigabyte (GB)
1 terabyte (TB)
1 petabyte (PB)
1 exabyte (EB)
Logical storage capacity values (for example, logical device capacity) are
calculated based on the following values:
Logical capacity unit
Value
1 block
512 bytes
1 KB
1 MB
1 GB
1 TB
1 PB
1 EB
Getting help
Hitachi Data Systems Support Portal is the destination for technical support of
your current or previously-sold storage systems, midrange and enterprise
servers, and combined solution offerings. The Hitachi Data Systems customer
support staff is available 24 hours a day, seven days a week. If you need
technical support, log on to the Hitachi Data Systems Support Portal for
contact information: https://portal.hds.com.
Preface
Hitachi Tiered Storage Manager for Mainframe Messages
ix
Hitachi Data Systems Community is a new global online community for HDS
customers, partners, independent software vendors, employees, and
prospects. It is an open discussion among these groups about the HDS
portfolio of products and services. It is the destination to get answers,
discover insights, and make connections. The HDS Community complements
our existing Support Portal and support services by providing an area where
you can get answers to non-critical issues and questions. Join the
conversation today! Go to community.hds.com, register, and complete
your profile.
Comments
Please send us your comments on this document: doc.comments@hds.com.
Include the document title and number, including the revision level (for
example, -07), and refer to specific sections and paragraphs whenever
possible. All comments become the property of Hitachi Data Systems
Corporation.
Thank you!
Preface
Hitachi Tiered Storage Manager for Mainframe Messages
1
Messages
This chapter describes the messages.
Message format
Messages starting with KT
Messages starting with YK
User completion codes
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-1
Message format
This section describes the format of the messages and the notations used in
this manual.
YYY
Indicates the message type.
Hitachi Tiered Storage Manager for Mainframe messages:
KTD: Syntax error, format error, or I/O error related to Tiered Storage
Manager for Mainframe files
YK7: YKBTSCAN
YK9: License
1-2
YKC: YKSCAN
YKD: YKDELETE
YKE: YKEWAIT
YKF: YKFREEZE
YKH: YKH2B
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
YKL: YKLOAD
YKN: YKRUN
YKP: YKSTATS
YKQ: YKQUERY
YKR: YKRESYNC
YKS: YKSTORE
YKU: YKSUSPND
YKV: YKRECVER
YKW: YKWATCH
nnn
Indicates the serial number of the message.
Z
Indicates the severity of the message.
T: Fatal
E: Error
W: Warning
I: Notification of information
Message text
Description
message-text#4 message-description
#1
Severity code, which indicates the severity level. If the output destination
is MSG, this value is set to Severity in the message structure. For details
about the message structure, see the Hitachi Business Continuity
Manager Reference Guide or Tiered Storage Manager for Mainframe User
Guide.
#2
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-3
Return code, which is set when the message is output. If multiple return
codes were output for the message during command processing, the
largest value is set as the command return code.
#3
Detailed information used to confirm specific issues such as the error
location or volume identification information. If the output destination is
MSG, this value is set to Value in the message structure.
#4
Character strings enclosed in square brackets ([ ]) might be omitted.
CON: Console
SYS: SYSLOG
#
If MSGID ON is specified using the ISPF system command, the message
ID and message text are displayed in the ISPF panel. However, if MSGID
OFF is specified, only the message text is displayed at the beginning
without the message ID.
If the sequence of REXX message variables is specified correctly in the MSG
parameter common to all CLI commands, the message will be saved in the
sequence.
If the MSG parameter is specified incorrectly, or an error occurs while the CLI
command is using the REXX interface, the message will be displayed at the
user's TSO/E terminal.
For details about the CLI commands, see the Hitachi Business Continuity
Manager Reference Guide or Tiered Storage Manager for Mainframe User
Guide.
1-4
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message text
Description
KTA001I ISPF
KTA051E ISPF
KTA052E ISPF
An error occurred in the license key An error occurred in the license key
dataset.
dataset.
Make sure that the name of the license key
dataset is correct, and that the license key
dataset has been created correctly. If
necessary, re-create the license key dataset
and transfer the license key file again.
KTA071W ISPF
KTA072W ISPF
Your function license will expire in n Your license for the function indicated by
day(s).
function will expire in n days.
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-5
Message ID
Message text
Description
To continue using the product after the
expiration date, you need a permanent
license.
KTA400I CON
KTA401I CON
variable: value
KTA402I CON
1-6
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
System symbol name
value-2
Value set for the system symbol in
symbol
If a system symbol has not been set,
N/A is displayed.
KTA403I CON
command-name: Supplied
parameters invalid, reason
code=rrrr.
Starting parameter-name-1
parameter value exceeds ending
parameter-name-2.
hh:mm:ss command
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-7
Message ID
KTC311I SYS
Message text
hh:mm:ss command RC=rc
Description
This log message gives the execution
results of a CLI command.
hh:mm:ss
The time when the CLI command was
issued (local time)
command
The name of the CLI command
rc
Return codes of the CLI command
For details about return codes for CLI
commands, see the manual Tiered
Storage Manager for Mainframe User
Guide.
KTC910I CON
command
KTC911I CON
command RC=rc
1-8
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
dsstate
Status of the configuration file
If an attribute of the configuration file is
abnormal, one of the following messages is
output:
UNAVAILABLE DATASET
The configuration file is being used.
Check the usage of the configuration
file.
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-9
Message ID
Message text
Description
Status of the configuration file
file
Name of the configuration file in which
the error was detected
1-10
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
Value specified for item name
name
Name of an item in the tiering policy
information CSV file
file
Name of the tiering policy information
CSV file in which the error was
detected
rec#
Number of the line in file where the
error was detected
KTD204E MSG SC=32 The number of items specified for a The number of items specified for a line in
RC=32 (file rec#)
line in the tiering policy information the tiering policy information CSV file is
CSV file is invalid.
invalid.
file
Name of the tiering policy information
CSV file in which the error was
detected
rec#
Number of the line in file where the
error was detected
KTD206E MSG SC=32 The specified volume does not exist The specified volume does not exist in the
RC=32 (file rec#
in the disk configuration definition
disk configuration definition file.
device)
file.
The volume specified in the tiering policy
information CSV file must exist in the disk
configuration definition file. Scan the target
volumes before executing the KTIMPORT
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-11
Message ID
Message text
Description
command. Alternatively, execute the
KTIMPORT command with the SCAN
parameter specified.
file
Name of the tiering policy information
CSV file in which the error was
detected
rec#
Number of the line in file where the
error was detected
device
Either of the following is displayed:
Device number
Device number
KTD208E MSG SC=32 No volumes belong to the specified No volume belongs to the SMS storage
RC=32 (file rec#
storage group storage-group-name. group indicated by the specified storagestorage-group-name)
group-name.
file
Name of the tiering policy information
CSV file in which the error was
detected
rec#
Number of the line in file where the
error was detected
storage-group-name
1-12
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
Name of the SMS storage group
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-13
Message ID
Message text
Description
the KTSTORE command, the configuration is
allocated with a temporary dataset name,
and is renamed by using a formal dataset
name when writing is complete.) Check
whether the dataset name displayed in
dataset-name actually exists in the system,
take any necessary action, and then
execute the command again. When op is
RENAME, information about the name to
change to is displayed in dataset-name and
dsstate.
dsstate
Status of the configuration file:
DSORG = XX.
The DSORG attribute value of the dataset
RECFM = XX.
The RECFM attribute value of the dataset
LRECL = XX.
The LRECL attribute value of the dataset
BLKSIZE = XX.
The BLKSIZE attribute value of the dataset
EXTENT=XX.
Number of currently allocated dataset
extents
XX is the number of extents allocated to
dataset-name.
CANNOT GET DSSTATE, reason code=nnnn
Dataset information cannot be acquired.
Alternatively, no configuration file has been
allocated.
nnnn (decimal number) indicates the
reason code (maintenance information).
1-14
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
many output messages to be retained in
the internal buffer.
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-15
Message ID
Message text
Description
Maintenance information
1-16
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
Command code of the command that
was being executed when the error
occurred
See the description of command codes
for the KTZ201E message.
yyy (character string)
Maintenance information
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-17
Message ID
Message text
Description
Command code of the command that
was being executed when the error
occurred
See the description of command codes
for the KTZ201E message.
yyy (character string)
Maintenance information
1-18
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
count
Number of devices for which
information acquisition was skipped
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-19
Message ID
Message text
Description
The indicated device might not have
been installed or might not have been
connected.
For CC=0 and CSW=nnnnnn0000nnnn
(DSB=00 and CSB=00) where n indicates a
value:
The indicated device might not have
been installed or might not have been
connected.
For CC=0 and CSW=0000000006nnnn where n
indicates a value:
An MIH occurred or a logical path might
not have been connected.
device-number-1 (character string)
Device that issued an I/O
device-number-2 (character string)
Operation-target device
If the device number of the operationtarget device is not found, **** is
displayed.
code-1 (decimal number)
CC information (one digit)
code-2 (hexadecimal number)
CSW information (14 digits)
code-3 (hexadecimal number)
Subcommand code (4 digits)
code-4 (hexadecimal number)
Completion code (2 digits)
code-5 (hexadecimal number)
Details code (2 digits)
xxx (decimal number)
Command code of the command that
was being executed when the error
occurred
See the description of command codes
for the KTZ201E message.
yyy (character string)
Maintenance information
volume-ID
Information that identifies the volume
in which the error occurred
Volume serial number, control unit
number, and command control address
number
1-20
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
KTH255E MSG TSO
SC=32 RC=32
(volume-ID)
Message text
Description
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-21
Message ID
Message text
Description
Reason code
code-3 (hexadecimal number)
Error code
For details about an error code, see the
description for that error code.
code-4 (hexadecimal number)
Subcommand code
xxx (decimal number)
Command code of the command that
was being executed when the error
occurred
See the description of command codes
for the KTZ201E message.
yyy (character string)
Maintenance information
volume-ID
Information that identifies the volume
in which the error occurred
Volume serial number, control unit
number, and command control address
number
KTM012E ISPF
KTM014E ISPF
KTM015I LOG
RC:nn CMD:command
MODID:modid
1-22
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
KTM016W LOG
Message text
SEV:nn TEXT:message-text
VALUE:message-value
Description
The command output the following
information to the message structure, and
then ended.
nn
Severity level stored in Severity
message-text
Message ID and message text stored in
Text
message-value
Additional information stored in Value
KTM018I LOG
KTM021E ISPF
KTM022E ISPF
KTM023E ISPF
Invalid value
KTM025E ISPF
KTM027E ISPF
KTM028E ISPF
Point-and-shoot on AC to access
Actions or enter "/".
KTM029E ISPF
KTM031E ISPF
KTM523E ISPF
KTM524E ISPF
KTM525E ISPF
KTM526E ISPF
KTM527E ISPF
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-23
Message ID
Message text
Description
KTM700E ISPF
KTM701E ISPF
KTM702E ISPF
KTM703E ISPF
KTM708E ISPF
KTM709E ISPF
KTM721I ISPF
KTM722E ISPF
KTM724E ISPF
KTM726E ISPF
KTM727E ISPF
KTM728I ISPF
KTM731E ISPF
KTM732E ISPF
1-24
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
info
Maintenance information
KTM765I ISPF
KTM901E TSO
KTM902E TSO
KTM903E TSO
KTM904E TSO
KTM905E TSO
KTM906E TSO
KTM907E TSO
KTM908E TSO
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-25
Message ID
Message text
Description
Check and revise the region size, and then
re-execute the command.
For details about the return codes, see the
IRXEXCOM macro specifications in the
manual TSO/E Programming Services.
nnnn
REXX variable access error code
KTR203E TSO
RC=40#
A REXX read error occurred. (return The command cannot be executed because
code=nnn, name= name,
a REXX read error occurred.
cmd=xxx, pos=yyy)
nnn (decimal number)
Return code of the OS REXX variable
access routine
- If the value of nnn is -2:
The area for the REXX variable is
insufficient. Check and revise the
region size, and then re-execute the
command. For details about the return
code, see the specifications for the
IRXEXCOM macro in TSO/E
Programming Services.
- If the value of nnn is 40:
Check that the REXX program is
running in the TSO/E environment, and
then re-execute the command.
- If the value of nnn is not one of the
above values:
Revise the values specified in the
configuration file and parameters. If
the value of nnn is 52, a configuration
file (XML) being edited might have
been specified.
name (character string)
REXX variable name
xxx (decimal number)
Command code of the command that
was being executed when the error
occurred
See the description of command codes
for the KTZ201E message.
yyy (character string)
Maintenance information
#
1-26
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
If the read attempt was made on a
REXX variable that does not exist, the
return code is 36. If this message is
displayed during execution of the
KTLOAD command, RC=44 is displayed.
KTR204E TSO
RC=40#
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-27
Message ID
KTR205E TSO RC=52
Message text
Description
name
Name of the REXX variable
value
Value of the REXX variable
KTR290E MSG SC=44
RC=44 (result)
Encountered an unrecognized
element: name
1-28
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
Name of the configuration file in which
the error was detected
rec#
Number of the line in file where the
error was detected
Unexpected termination of
element: name
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-29
Message ID
Message text
Description
Only use the entity references defined in
the Extensible Markup Language (XML) 1.0
specification produced by the World Wide
Web Consortium (W3C) (http://
www.w3.org/) .
file
Name of the configuration file in which
the error was detected
rec#
Number of the line in file where the
error was detected
string
Description of the error in file where
the error was detected
1-30
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
KTX077W MSG SC=4
RC=4 (file:rec#)
Message text
APIInfo Level=level invalid.
Supported level is v.r.m.
Description
The Level attribute level of the APIInfo
element on line number rec# in file is
invalid.
Check the indicated line, and then identify
the cause of the error by referring to the
description of the XML document type
definition of the configuration file in the
manual Tiered Storage Manager for
Mainframe User Guide.
file
Name of the configuration file in which
the error was detected
rec#
Number of the line in file where the
error was detected
level
The invalid API level specified for the
APIInfo element of file
v.r.m
Supported API level
For details about the values, see the
description of the XML document type
definition of the configuration file in the
manual Tiered Storage Manager for
Mainframe User Guide.
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-31
Message ID
Message text
Description
file
Name of the configuration file in which
the error was detected
rec#
Number of the line in file where the
error was detected
This kind of elements element can't The same element name of XML element
be defined more than once.
element was defined more than once.
Revise the specification on line number
rec# in file.
file
Name of the configuration file in which
the error was detected
rec#
Number of the line in file where the
error was detected
1-32
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
Number of the line in file where the
error was detected
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-33
Message ID
KTX274E MSG SC=36
RC=36 (file:rec#)
Message text
ETag name is mismatch. /correctETag-name is expected, but /
incorrect-ETag-name is specified.
Description
An ETag name /incorrect-ETag-name that is
not the expected ETag name /correct-ETagname was specified.
Revise the specification on line number
rec# in file.
file
Name of the configuration file in which
the error was detected
rec#
Number of the line in file where the
error was detected
1-34
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
file
Name of the configuration file in which
the error was detected
rec#
Number of the line in file where the
error was detected
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-35
Message ID
KTZ010E TSO SC=44
RC=44
Message text
Module not found: load-modulename
Description
Load module load-module-name was not
found.
Make sure that the load module is installed
correctly.
KTZ015I MSG
RC:nn CMD:command
storage-group-name
Name of the SMS storage group for
which information could not be
acquired
KTZ101E MSG SC=36
RC=36
1-36
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
status of the volume or SMS storage group
indicated by device.
For details about the error cause, see the
return code for the KTSCAN command
indicated in the message KTZ015I that was
output at the same time.
device
The volume or SMS storage group that
could not be scanned.
One of the following is displayed:
- Device number
- Volume serial number
- SMS storage group name
type
- DEVN: Indicates that the value of
device is a device number.
- VOLSER: Indicates that the value of
device is a volume serial number.
- STORGRP: Indicates that the value of
device is an SMS storage group name.
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-37
Message ID
Message text
Description
Area size
area (character string)
HIGH means 16 MB or more. LOW means
less than 16 MB.
xxx (decimal number)
Command code of the command that
was being executed when the error
occurred
80: KTSCAN
81: KTIMPORT
82: KTSTORE
83: KTGETHDA
84: KTLOAD
85: KTACTTPG
86: KTDCTTPG
87: KTQRYTPG
88: KTQSTATS
89: KTQRYRLC
90: KTDCTDEV
91: KTQRYDEV
If a command was not being executed,
0 is displayed.
yyy (character string)
Maintenance information
#
If this message is displayed during
logging or trace acquisition, RC=0 is
displayed.
1-38
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
KTZ205E PRT RC=0
Message text
A Parameter error occurred.
(detail=message-text, cmd=xxx,
pos=yyy)
Description
The command cannot be executed because
a parameter error occurred.
message-text (character string)
Message text
xxx (decimal number)
Command code of the command being
executed when the error occurred.
For details, see the command code
description for the KTZ201E message.
yyy (character string)
Maintenance information
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-39
Message ID
Message text
Description
1-40
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
Description
yyy (character string)
Maintenance information
KTZ212W CON#
RC=0
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-41
Message ID
Message text
Description
See the description of command codes
for the KTZ201E message.
yyy (character string)
Maintenance information
#
If this message is displayed at a time
other than logging, the KTZ212W
message is not output to the console.
The message is recorded in LOG, and
processing continues.
Parameters were input. ( nnn, xxx ) Parameters were input from SYSIN.
nnn (decimal number)
Number of lines
xxx (character string)
Parameter input
1-42
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
KTZ268E MSG CON
PRT SC=0 RC=0
Message text
Incorrect dataset format. (DD
name=ddd, KKK=AAA must be
BBB, cp=xxx:yyy)
Description
The dataset format is invalid.
ddd
DD name
KKK
If DSORG is abnormal: DSORG
If RECFM is abnormal: RECFM
If LRECL is abnormal: LRECL
If BLKSIZE is abnormal: BLKSIZE
AAA
File attribute value that caused the
error. (However, * is displayed if the
file attribute value is undefined or
immediately after dataset allocation.)
BBB
Correct file attribute value
xxx (decimal number)
Command code of the command that
was being executed when the error
occurred
See the description of command codes
for the KTZ201E message.
yyy (character string)
Maintenance information
cli-name encountered an
unexpected error.
cli-name
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-43
Message ID
Message text
Description
Name of the executed CLI command
detailed-info
Detailed information that helps error
analysis (for maintenance personnel)
KTZ301E TSO
1-44
Message text
Supplied parameters invalid: An invalid parameter was specified. Revise the value
line
specified on the line number identified by line.
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YK7001E PRT
RC=16
No parameter-name
parameter supplied.
YK7003E PRT
RC=16
YK7004E PRT
RC=16
YK7014I PRT
YK7015I PRT
Severity: Severity
Text: Text
Severity
Severity code stored in Severity for the message
structure
Value: Value
Text
YK7032I PRT
RC=0
YK7033I PRT
RC=4
YK7099I PRT
YKBTSCAN return
code=nnnn
YK8001I CON
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-45
Message ID
Message text
YK8002I CON
YK8003I PRT
CON
YK8007I PRT
CON
time Synchronization
percentage decreased, Copy
Group: cgid.
YK8008E CON
YK8009E CON
Task(task-ID) abended:
completion-code.
YK8010E CON
1-46
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YK8011E CON
YK8012E CON
YK8013E CON
YK8014I CON
YK8015I CON
YK8016E CON
YK8017E CON
YK8018E CON
Invalid command:
command-name.
Operand is incorrect:
command-name.
YK8020I CON
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-47
Message ID
Message text
YK8021I CON
YK8022I CON
YK8023W CON
YK8024E CON
YK8025E CON
YK8026E CON
abnormal-termination-code-and-reason-code-forabnormal-termination
IRXINIT returns the abnormal termination code in
the two trailing bytes of R0 and returns the reason
code for abnormal termination in the two leading
bytes of R0. If the reason code for abnormal
termination is larger than two bytes, IRXINIT
returns only the two trailing bytes for the reason
1-48
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YK8027E CON
YK8028E CON
BCM Monitor function abend: The main task or subtask terminated abnormally during
code=Sxxx Uxxxx
BCM Monitor processing. If the task cannot be
recovered, BCM Monitor will stop.
abended-module=modulename C-Date=modulecreation-date
base=bbbbbbbb disp=dddd
[calling-module=modulename C-Date=y'y'.m'm'.d'd'
base=bbbbbbbb disp=dddd]
PSW=pppppppp pppppppp
ILC=ll INTC=xx
Registers at time of failure
bbbbbbbb
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-49
Message ID
Message text
pppppppp pppppppp
PSW during the abnormal termination
ll
Length of the command during the abnormal
termination
xx
Interrupt code during the abnormal termination
YK8031W CON
YK8040I PRT
CON
YK8041I PRT
CON
YK8042I PRT
CON
1-50
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YK8043I PRT
CON
YK8044I PRT
CON
YK8045I PRT
CON
YK8046I PRT
CON
YK8047I PRT
CON
YK8048I PRT
CON
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-51
Message ID
Message text
YK8049I PRT
CON
YK8050I PRT
CON
YK8054I PRT
CON
YK8055I PRT
CON
time BCM Monitor will pause BCM Monitor will go to sleep because the PAUSE action
now for 'sleep-time' minutes. was executed.
Entering the WAKEUP command resumes copy group
monitoring before the sleep time of sleep-time has
elapsed.
time
Message output time
This is only displayed when the output destination
is SYSTSPRT.
sleep-time
Sleep duration
YK8056E PRT
CON
YK8070E PRT
1-52
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YK8071E PRT
YK8073E PRT
YK8074E PRT
YK8075E PRT
YK8076E PRT
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-53
Message ID
Message text
YK8077E PRT
YK8078E PRT
YK8079E PRT
YK8080E PRT
1-54
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YK8081E PRT
Message text
time Combination of STATUS The combination of STATUS and ACTION specified in the
and ACTION is invalid :
YKMONCG file is invalid.
rec#.
time
Message output time
This is only displayed when the output destination
is SYSTSPRT.
rec#
Line number where the error was detected
YK8082E PRT
YK8083E PRT
YK8084E PRT
YK8085E PRT
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-55
Message ID
YK8100I PRT
CON
Message text
time sendmsg
YK8200I PRT
CON
time sendmsg
YK8220E PRT
CON
time
Message output time
YK8221I PRT
CON
YK8222E PRT
CON
1-56
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YK8223W PRT
CON
Message text
time cmd (RC=4) : Some
volumes with invalid status
found.
YK8230E PRT
CON
YK8231E PRT
CON
YK8300I PRT
CON
time sendmsg
YK8301I PRT
CON
YK8302I PRT
CON
YK8303I PRT
CON
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-57
Message ID
Message text
YK8304I PRT
CON
YK8305I PRT
CON
YK8310I
N/A
YK8311I CON
REPORT SUMMARY:
cgid
Copy group ID
cgtype
Copy group type
dad
Copy group host device address domain ID
prefix
Prefix
simplexct
Number of copy pairs in SIMPLEX status
pendingct
Number of copy pairs in PENDING status
duplexct
Number of copy pairs in DUPLEX status
suspendallct
Number of copy pairs in SUSPEND status
otherct
Number of copy pairs in other statuses
status
Copy group status
match
Copy progress percentage
rev%
Percentage of copy pairs whose copy direction is
secondary-to-primary
1-58
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YK8312I
N/A
YK8313I CON
REPORT DETAIL:
cgid
Copy group ID
cgtype
dad
>: Primary-to-secondary
<: Secondary-to-primary
sdevn
Secondary device number
status
Copy pair status
match
Copy pair matching percentage
ctid
Consistency group ID or master journal group ID
sub-ctid
Restore journal group ID
ctdelta
Consistency delta value for each consistency group
cttime
Consistency time for each consistency group
YK8314I
N/A
YK8315I CON
REPORT RPO:
cgid
Copy group ID
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-59
Message ID
Message text
ctid
sub-ctid
YK8316I
N/A
YK8317I CON
REPORT STATS:
cgid
Copy group ID
cgtype
1-60
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YK8318I
N/A
YK8319I CON
REPORT STATS:
cgid
Copy group ID
cgtype
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-61
Message ID
Message text
YK8320I PRT
CON
YK8321I PRT
CON
YK8322I PRT
CON
YK8323I PRT
CON
YK8324I PRT
CON
YK8325I PRT
CON
YK8326I PRT
CON
1-62
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YK8400I PRT
CON
time sendmsg
YK8401I PRT
CON
time Check Startup Status of BCM Monitor will start checking the status of the copy
Copy Group 'cgid':
group identified by cgid.
time
Message output time
This is only displayed when the output destination
is SYSTSPRT.
YK8402I PRT
CON
YK8403I PRT
CON
YK8404I PRT
CON
YK8405I PRT
CON
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-63
Message ID
Message text
YK8406I PRT
CON
YK8410I PRT
CON
YK8411I
N/A
YK8412I CON
SYSTEM OPTIONS:
cycletime
Cycle time
timeout
Timeout value
lvllog
Level of messages to be output to SYSTSPRT
lvlcons
Level of messages to be output to the console
err-action
Error action to be executed
stoppt
Stop point
sleeppt
Sleep point
YK8413I
1-64
N/A
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YK8414I CON
Message text
COPY GROUP DEFINITIONS:
ID : cgid PREFIX : prefix
DAD-ID : dad ROUTE LIST :
route[,route-label]
MONITOR STATUS :
cgmonstat STARTUP
STATUS :
cgsastat,cgsaact,cgsaopt
WHEN STATUS status DO
ACTION 'action;err-action;'
YK9001I ISPF
YK9051E ISPF
YK9052E ISPF
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-65
Message ID
Message text
YK9071W ISPF
YK9072W ISPF
YK9080E CON
YK9081W CON
Message text
YKA000T TSO
YKA001E TSO
1-66
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YKA002E TSO
Message text
HANDLE() parameter
required for this operation
YKA003E TSO
OP(OPEN|GET|CLOSE)
option required
YKA004E TSO
YKA004E TSO
YKA007E TSO
YKA008E TSO
TIMEOUT() parameter
cannot be specified for this
operation
YKA009E TSO
YKA010E TSO
YKA096I TSO
No message found
YKA096I TSO
No message found
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-67
Message ID
Message text
YKA097I TSO
message-text
YKA097I TSO
message-text
YKA098I TSO
HANDLE(x'handle')
YKA098I TSO
HANDLE(x'handle')
YKA099I TSO
YKA099I TSO
YKB001I TSO
YKP2B completed.
RC=return-code
1-68
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKB002I TSO
No copy pair was discovered. No copy pair was detected within the specified range.
Check the operating range and status of the copy pair
that you want to acquire, and execute the YKP2B
command again. If the copy pair status is SIMPLEX, the
YKP2B command does not detect any copy pair.
YKB100E TSO
parameter-name
Name of the invalid or missing parameter
YKB101E TSO
YKB102E TSO
msg=message-text:
message-value: messageseverity
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-69
Message ID
Message text
YKB200W TSO
YKB201W TSO
YKB202W TSO
YKB203W TSO
1-70
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKB204W TSO
A dynamic configuration
change was detected.
DEVN=device-number
Message text
YKC000T TSO
RC=48
YKC001E MSG
SC=48 RC=48
No controller ARRAYS()
supplied
YKC001E TSO
RC=48
YKC001E MSG
SC=48 RC=48
YKC001E MSG
SC=48 RC=48
YKC002E MSG
SC=48 RC=48
Controller ARRAYS(stem)
does not include trailing "."
stem
Stem name assigned to the ARRAYS parameter
YKC002E TSO
RC=48
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-71
Message ID
Message text
YKC002E MSG
SC=48 RC=48
YKC008E MSG
SC=48 RC=48
YKC008E MSG
SC=48
YKC008E MSG
SC=48
YKC008E MSG
SC=48 RC=48
YKC009E MSG
SC=48 RC=48
YKC009E MSG
SC=48 RC=48
YKC009E MSG
SC=48 RC=48
Starting FROMVSN() exceeds The value specified in the FROMVSN parameter exceeds
ending TOVSN()
the value of the TOVSN parameter.
YKC010E TSO
RC=40
YKC031I MSG
SC=0 (count)
Scanned DASD Device Count The number of DASD devices scanned by the YKSCAN
command.
count
Number of scanned DASD devices
YKC032I MSG
SC=0 (count)
YKC033I MSG
SC=4 (count)
The specified devices that do As a result of the device scan, information acquisition
not have any available I/O
on devices for which no I/O path is available was
paths were skipped.
skipped.
count
The number of devices skipped when the device
information was acquired
YKC034E MSG
SC=32 RC=32
1-72
A dynamic configuration
change was detected during
YKSCAN command
processing.
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKC099I TSO
Message text
YKD000T TSO
RC=48
YKD001E TSO
RC=48
YKD001E MSG
SC=48 RC=48
YKD002E MSG
SC=48 RC=48
stem
Stem name assigned to the STEM parameter
YKD002E MSG
SC=48
YKD002E TSO
RC=48
YKD008E MSG
SC=48
YKD010E TSO
RC=40
YKD050E MSG
SC=36 RC=48
(attribute-value)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-73
Message ID
Message text
YKD058E MSG
SC=36 RC=48
YKD099I TSO
Message text
YKE000T TSO
RC=48
YKE001E MSG
SC=48 RC=48
YKE001E TSO
RC=48
YKE001E MSG
SC=48 RC=48
YKE001E MSG
SC=48 RC=48
YKE001W MSG
SC=4 RC=4
copy-group
Copy group ID
state
Status to be monitored
YKE002E MSG
SC=48 RC=48
1-74
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKE002E MSG
SC=48
YKE002E TSO
RC=48
YKE002E MSG
SC=48 RC=48
YKE003E MSG
SC=48 RC=48
YKE003E MSG
SC=8 RC=8
Unexpected transition of
group copy-group pair index
to state state.
YKE008E MSG
SC=48
YKE010E TSO
RC=40
YKE099I TSO
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-75
Message text
YKF000T TSO
RC=48
YKF001E TSO
RC=48
YKF001E MSG
SC=48 RC=48
YKF002E MSG
SC=48 RC=48
stem
Stem name assigned to the STEM parameter
YKF002E TSO
RC=48
YKF002E MSG
SC=48 RC=48
YKF010E TSO
RC=40
YKF050E MSG
SC=48 RC=48
(attribute-value)
YKF099I TSO
1-76
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message text
YKG000T TSO
SC=48
YKG001E TSO
RC=48
YKG002E TSO
RC=48
YKG003E TSO
RC=52
YKG004E MSG
SC=48 RC=48
YKG005E MSG
SC=48 RC=48
YKG006E MSG
SC=48 RC=48
YKG008E MSG
SC=48 RC=48
YKG050W MSG
SC=4 RC=4
(file:rec#)
Unrecognized element
encountered: name
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-77
Message ID
YKG051E MSG
SC=36 RC=36
(file:rec#)
Message text
End of file encountered in
comment.
YKG053W MSG
SC=4 RC=4
(file:rec#)
Unrecognized Version
attribute value: value
YKG054E MSG
SC=36 RC=36
(file:rec#)
Unexpected termination of
element: name
The XML element name that exists on the line with the
line number identified by rec# in the file identified by
file has not been correctly created.
Check the indicated line, and then identify the cause of
the problem by referring to information contained in
the XML document type definitions, in the Hitachi
Business Continuity Manager Reference Guide.
file
Name of the configuration file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
YKG074E MSG
SC=36 RC=36
(file:rec#)
The & character string that exists on the line with the
line number identified by rec# in the file identified by
file has not been correctly escaped.
See the description of Extensible Markup Language
(XML) 1.0 at http://www.w3.org.
file
Name of the configuration file where the error was
detected
1-78
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKG075W MSG
SC=4 RC=4
(file:rec#)
Unrecognized Encoding
attribute value: value
YKG076W MSG
SC=4 RC=4
(file:rec#)
Unrecognized attribute:
name = value
YKG077W MSG
SC=4 RC=4
(file:rec#)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-79
Message ID
Message text
YKG079E MSG
SC=44 RC=44
(result)
YKG085E MSG
SC=40 RC=40
(file:rec#)
YKG088E MSG
SC=40 RC=40
(file)
YKG089E MSG
SC=40 RC=40
(file)
YKG090E MSG
SC=40 RC=40
(file)
YKG091E MSG
SC=40 RC=40
(file)
1-80
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKG092E MSG
SC=40 RC=40
(file)
YKG099I MSG
TSO
Message text
YKG201E MSG
SC=48 RC=48
YKG202E TSO
RC=48
"SYSAUTH". cannot be
specified in MSG()
parameter.
YKG203E MSG
SC=48 RC=48
"SYSAUTH." cannot be
specified in STEM()
parameter.
YKG204E TSO
RC=48
YKG205E MSG
SC=48 RC=48
YKG241W MSG
SC=4 RC=4
(file:rec#)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-81
Message ID
Message text
YKG250E MSG
SC=36 RC=36
(file:rec#)
YKG251E MSG
SC=36 RC=36
(file:rec#)
YKG252E MSG
SC=36 RC=36
(file:rec#)
YKG253E MSG
SC=36 RC=36
(file:rec#)
YKG254E MSG
SC=36 RC=36
(file:rec#)
1-82
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKG255E MSG
SC=36 RC=36
(file:rec#)
YKG271E MSG
SC=36 RC=36
(file:rec#)
YKG273E MSG
SC=36 RC=36
(file:rec#)
YKG274E MSG
SC=36 RC=36
(file:rec#)
YKG275W MSG
SC=4 RC=4
(file:rec#)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-83
Message ID
Message text
YKG276E MSG
SC=36 RC=36
(file:rec#)
YKG277E MSG
SC=36 RC=36
(file:rec#)
YKG285E MSG
SC=36 RC=36
(file:rec#)
YKG286E MSG
SC=36 RC=36
(file:rec#)
1-84
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKG290E MSG
SC=44 RC=44
(result)
YKG295E MSG
SC=44 RC=44
(file:rec#)
YKG298E MSG
YKGETHDA encountered an
TSO SC=44
unexpected error.
RC=44 (detailedinfo)
detailed-info
Information displayed to assist the Hitachi Data
Systems representative or authorized service
provider in resolving the problem.
YKH001I TSO
YKH2B completed.
RC=return-code
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-85
Message ID
Message text
YKH002I TSO
No copy pair was discovered. No copy pairs were detected within the specified range.
Check the operating range and status of the copy pair
that you want to acquire, and execute the YKH2B
command again. If the copy pair status is SIMPLEX, the
YKH2B command will not detect the copy pair. In
addition, if you execute the YKH2B command without
specifying the HS parameter or execute the YKH2B by
specifying HS(CHECK) while HyperSwap is disabled,
copy pairs cannot be detected.
YKH100E TSO
Missing or invalid parameter: Check the following, and then re-execute the
parameter-name
command:
parameter-name
Name of the invalid or missing parameter
YKH101E TSO
YKH102E TSO
msg=message-text:
message-value: messageseverity
info
1-86
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKH200W TSO
YKH201W TSO
YKH202W TSO
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-87
Message ID
Message text
YKH203W TSO
YKH204W TSO
A dynamic configuration
change was detected.
DEVN=device-number
YKH205W TSO
YKJ000E TSO
RC=48
1-88
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YKJ001E TSO
RC=48
Message text
name parameter is too long.
YKJ002E TSO
RC=48
YKJ051E TSO
RC=32
msg= message-text:
message-value: messageseverity
YKJ100E TSO
RC=32
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-89
Message ID
YKJ101I TSO
RC=4
Message text
No copy pair is defined in
specified Copy Group
definition: file
YKJ102E TSO
RC=32
YKJ150E TSO
RC=40
dd-name
dd name of the CSV file where the error was
detected
YKJ151E TSO
RC=40
YKJ152E TSO
RC=40
1-90
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
EXTENT= extent
The number of extents of the dataset that is
currently allocated
extent indicates the number of extents that are
allocated to the dataset indicated by dd-name.
YKJ200E TSO
RC=32
YKJ201E TSO
RC=32
YKJ202I TSO
RC=4
YKJ203E TSO
RC=32
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-91
Message ID
YKJ204E TSO
RC=32
Message text
Primary volume is not
specified in Pair information
CSV file: dd-name: rec#
YKJ205E TSO
RC=32
YKJ206E TSO
RC=32
Device number
YKJ207W TSO
RC=8
YKJ208W TSO
RC=8
1-92
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKJ209E TSO
RC=32
YKJ210E TSO
RC=32
YKJ211E TSO
RC=32
PVOL & SVOL of SI pair is in A copy pair, which has a P-VOL storage system serial
the different storage system: number and an S-VOL storage system serial number
dd-name: rec#
that do not match, was found in a copy group of copy
type ShadowImage.
dd-name
dd name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by dd-name
where the error was detected
YKJ212E TSO
RC=32
A specific combination of a
storage system serial
number and a C/T group ID
is used for multiple UR Copy
Groups: dd-name: rec#
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-93
Message ID
Message text
YKJ214W TSO
RC=8
1-94
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKJ250E TSO
RC=32
YKJ251E TSO
RC=32
YKJ252E TSO
RC=32
YKJ253E TSO
RC=32
YKJ254E TSO
RC=32
The specified supervisor DKC The supervisor disk controller or arbitration command
or arbitration command
device specification is incorrect.
device is invalid: dd-name:
dd-name
rec#
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-95
Message ID
Message text
YKJ255E TSO
RC=32
YKJ256E TSO
RC=32
YKJ257E TSO
RC=32
YKJ258E TSO
RC=32
EXCTG ID
1-96
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YKJ270E TSO
RC=32
Message text
name is not specified in CTG
information CSV file: ddname: rec#
YKJ271E TSO
RC=32
YKJ272E TSO
RC=32
YKJ273E TSO
RC=32
YKJ274E TSO
RC=32
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-97
Message ID
Message text
YKK001I PRT
KTINSCHK completed.
RC=return-code, V/
R=versionnumber,execution-date
YKK001I PRT
YKINSCHK completed.
RC=return-code, V/
R=versionnumber,execution-date
YKK101E TSO
RC=32
YKK102E TSO
RC=32
1-98
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKK103E TSO
RC=32
Acquisition of host ID
settings
failed,service=servicename,code=code1,code2.
Message text
YKL000T TSO
SC=48
YKL001E TSO
RC=48
YKL002E TSO
RC=48
YKL003E TSO
RC=52
YKL004E MSG
SC=48 RC=48
YKL005E MSG
SC=48 RC=48
YKL006E MSG
SC=48 RC=48
YKL007E MSG
SC=48 RC=48
YKL050W MSG
SC=4 RC=4
(file:rec#)
Unrecognized element
encountered: name
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-99
Message ID
Message text
YKL051E MSG
SC=36 RC=36
(file:rec#)
YKL053W MSG
SC=4 RC=4
(file:rec#)
Unrecognized Version
attribute value: value
YKL054E MSG
SC=36 RC=4
(file:rec#)
Unexpected termination of
element: name
The XML element name that exists on the line with the
line number identified by rec# in the file identified by
file has not been correctly created.
Check the indicated line, and then identify the cause of
the problem by referring to information contained in
the XML document type definitions, in the Hitachi
Business Continuity Manager Reference Guide.
file
Name of the configuration file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
YKL074E MSG
SC=36 RC=36
(file:rec#)
1-100
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKL075W MSG
SC=4 RC=4
(file:rec#)
Unrecognized Encoding
attribute value: value
YKL076W MSG
SC=4 RC=4
(file:rec#)
Unrecognized attribute:
name = value
YKL077W MSG
SC=4 RC=4
(file:rec#)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-101
Message ID
Message text
YKL079E MSG
SC=44 RC=44
(result)
YKL080E MSG
SC=36 RC=36
(file:rec#)
YKL081W MSG
SC=16 RC=16
(pair-index)
YKL082W MSG
SC=8 RC=8
(pair-index)
1-102
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKL083W MSG
SC=12 RC=12
(pair-index)
YKL085E MSG
SC=40 RC=40
(file:rec#)
YKL087E MSG
SC=40 RC=40
(file)
YKL088E MSG
SC=40 RC=40
(file)
YKL089E MSG
SC=40 RC=40
(file)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-103
Message ID
YKL090E MSG
SC=40 RC=40
(file)
Message text
File Allocation Failed:
dsstate.
YKL091E MSG
SC=40 RC=40
(file)
YKL092E MSG
SC=40 RC=40
(file)
YKL099I MSG
TSO
process-name command
return code=max-value,
reason code=reason-code.
If process-name is YKLOAD:
The YKLOAD command has finished. This message
is always displayed.
If process-name is YKGETRUT:
The route list definition file and the command
device definition file have been read. This message
is output when an invalid route list definition file or
invalid command device definition file is read in
ISPF.
reason-code
Reason code for the returned max-value
max-value
Maximum value among the output return codes
Message text
YKL201E MSG
SC=48 RC=48
YKL202E TSO
RC=48
"SYSAUTH". cannot be
specified in MSG()
parameter.
1-104
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKL203E MSG
SC=48 RC=48
"SYSAUTH." cannot be
specified in STEM()
parameter.
YKL204E TSO
RC=48
YKL205E MSG
SC=48 RC=48
YKL206E MSG
SC=48 RC=48
YKL241W MSG
SC=4 RC=4
(file:rec#)
YKL250E MSG
SC=36 RC=36
(file:rec#)
YKL251E MSG
SC=36 RC=36
(file:rec#)
YKL252E MSG
SC=36 RC=36
(file:rec#)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-105
Message ID
Message text
YKL253E MSG
SC=36 RC=36
(file:rec#)
YKL254E MSG
SC=36 RC=36
(file:rec#)
YKL255E MSG
SC=36 RC=36
(file:rec#)
YKL262E MSG
SC=36 RC=36
1-106
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YKL271E MSG
SC=36 RC=36
(file:rec#)
Message text
The element name is
required, but no element
was found.
YKL273E MSG
SC=36 RC=36
(file:rec#)
YKL274E MSG
SC=36 RC=36
(file:rec#)
YKL275W MSG
SC=4 RC=4
(file:rec#)
YKL276E MSG
SC=36 RC=36
(file:rec#)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-107
Message ID
Message text
YKL277E MSG
SC=36 RC=36
(file:rec#)
YKL280E MSG
SC=36 RC=36
(file)
YKL281E MSG
SC=36 RC=36
(file:rec#)
YKL282E MSG
SC=36 RC=36
(file)
YKL283E MSG
SC=36 RC=36
(file)
1-108
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YKL284E MSG
SC=36 RC=36
(file:rec#)
Message text
PVOL & SVOL of SI pair is in In a file for a copy group of the ShadowImage copy
the different storage system. type, a copy pair has been discovered for which the
storage system serial numbers of the P-VOL and S-VOL
do not match.
Correct the line with the line number identified by rec#
in the file identified by file.
file
Name of the configuration file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
YKL290E MSG
SC=44 RC=44
(result)
YKL291E MSG
SC=36 RC=36
function-name is not
licensed for use on this
system.
The license key for the function identified by functionname has not been installed, has expired, or is not
correctly recognized.
Check whether the license key is available for this
version.
If function-name is This product:
Business Continuity Manager commands cannot be
used because the Business Continuity Manager
license key has not been installed.
If function-name is UR 4x4 Extended CTG:
The function for preserving consistency on an
EXCTG basis cannot be used because the license
key required for a 4x4 configuration has not been
installed.
YKL292E MSG
CON SC=36
RC=36
YKL293W MSG
CON SC=0 RC=0
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-109
Message ID
Message text
YKL295E MSG
SC=44 RC=44
(file:rec#)
YKL298E MSG
CLI-name encountered an
TSO SC=44
unexpected error.
RC=44 (detailedinfo)
CLI-name
The name of the executed CLI command
detailed-info
Detailed information displayed to assist your
Hitachi Data Systems representative or authorized
service provider in resolving the problem
YKL419E MSG
SC=48 RC=48
1-110
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message text
YKM000T TSO
RC=48
YKM001E TSO
RC=48
YKM001E MSG
SC=48 RC=48
YKM002E MSG
SC=48 RC=48
stem
Stem name assigned to the STEM parameter
YKM002E MSG
SC=48
YKM002E TSO
YKM008E MSG
SC=48
YKM010E TSO
RC=40
YKM011E ISPF
This device number msgdevn The device number indicated by msgdevn has not been
has not been discovered on
scanned in the device address domain indicated by
msgdad.
msgdad.
msgdevn
Device number
msgdad
Device address domain
YKM012E ISPF
YKM014E ISPF
YKM015I LOG
RC:nn CMD:command
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-111
Message ID
YKM016W LOG
Message text
SEV:nn TEXT:message-text
VALUE:message-value
YKM017I LOG
message-text
YKM018E ISPF
YKM020E ISPF
YKM021E ISPF
YKM022E ISPF
YKM023E ISPF
Invalid value
YKM024E ISPF
YKM025E ISPF
YKM026E ISPF
YKM027E ISPF
YKM030E ISPF
YKM031E ISPF
1-112
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKM032E ISPF
Invalid operation.
YKM033E ISPF
YKM034E ISPF
Press F10 key and select C/T Press the F10 key, and then select a consistency group
ID.
ID.
YKM035E ISPF
YKM036E ISPF
YKM037E ISPF
YKM038E ISPF
YKM039E ISPF
YKM040E ISPF
A Consistency Group ID (C/T For the Universal Replicator copy group definition, you
ID,sub C/T ID) is required
need to specify a consistency group ID and a sub
for Universal Replicator Copy consistency group ID.
Group definition.
YKM041E ISPF
YKM042E ISPF
YKM043E ISPF
YKM044E ISPF
YKM045E ISPF
YKM046E ISPF
YKM047E ISPF
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-113
Message ID
Message text
YKM048E ISPF
YKM049E ISPF
YKM050E MSG
SC=36 RC=48
(attribute-value)
YKM056E MSG
SC=36 RC=48
YKM058E MSG
SC=36 RC=48
YKM099I TSO
Message text
YKM103E MSG
SC=48
YKM500E ISPF
1-114
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKM501E ISPF
YKM502E ISPF
YKM503E ISPF
YKM504E ISPF
YKM505E ISPF
YKM506E ISPF
In this interface version, the user cannot define interdisk controller paths.
YKM507E ISPF
YKM508E ISPF
YKM509E ISPF
YKM510E ISPF
YKM511E ISPF
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-115
Message ID
Message text
YKM512E ISPF
YKM513E ISPF
YKM514E ISPF
YKM515E ISPF
You cannot specify the same The same serial number cannot be specified for both
serial number to the primary the primary and secondary sides of the same logical
side and the secondary side path.
of the same logical path.
YKM516E ISPF
YKM517E ISPF
YKM518E ISPF
YKM519E ISPF
Different PathIDs cannot be The path ID that is different for the primary site and for
specified for the primary side the secondary site cannot be specified to the inter-disk
and secondary side of an
controller logical path.
inter-DKC path.
YKM520E ISPF
YKM521E ISPF
YKM522E ISPF
1-116
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKM523E ISPF
YKM524E ISPF
YKM525E ISPF
YKM526E ISPF
YKM527E ISPF
YKM528E ISPF
YKM529E ISPF
Message text
YKM700E ISPF
YKM701E ISPF
YKM702E ISPF
YKM703E ISPF
Enter hexadecimal
characters (0-9, A-F, a-f).
YKM704E ISPF
Enter alphanumeric
characters (0-9, A-Z, a-z).
YKM705E ISPF
YKM706E ISPF
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-117
Message ID
Message text
YKM707E ISPF
YKM708E ISPF
Enter the number (numerical Enter the numeric values (0-9) that you want to search
characters: 0-9) to search
for.
for.
YKM709E ISPF
YKM710E ISPF
YKM720E ISPF
YKM721E ISPF
YKM722E ISPF
YKM723E ISPF
YKM724E ISPF
YKM725E ISPF
YKM726E ISPF
YKM727E ISPF
1-118
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKM728E ISPF
YKM731E ISPF
YKM750E ISPF
YKM751E ISPF
DADID must be a
combination of one or more
qualifiers. Each qualifier
must be 1-8 alphanumeric
characters (0-9, A-Z, a-z)
with the first character being
an alphabetic character (AZ, a-z). The length of DADID
must be 1-28.
YKM752E ISPF
DEVN must be 4
hexadecimal characters
(0-9, A-F, a-f).
YKM753E ISPF
YKM754E ISPF
YKM755E ISPF
YKM756E ISPF
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-119
Message ID
Message text
YKM757E ISPF
YKM758E ISPF
YKM759E ISPF
YKM760E ISPF
Preset Mode cannot be used You cannot set the Preset Mode without specifying a
when C/T ID is not specified. consistency group ID.
YKM761E ISPF
YKM762E ISPF
YKM763E ISPF
YKM764E ISPF
YKM765I ISPF
YKM766E ISPF
Specified Prefix is being used The specified prefix is being used by another program.
by another program.
Check the value specified for the prefix.
YKM767E ISPF
YKM768E ISPF
YKM769E ISPF
1-120
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKM771I ISPF
YKM772I ISPF
YKM773E ISPF
DADID must be shortened so The dataset name of the disk configuration file
that dataset name of disk
exceeded the 44-character limit. Shorten the device
configuration file is no more address domain ID.
than 44 characters.
YKM774E ISPF
YKM775E ISPF
YKM776E ISPF
Message text
YKM900E ISPF
YKM901E TSO
YKM902E TSO
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-121
Message ID
Message text
YKM903E TSO
YKM904E TSO
YKM905E TSO
YKM906E TSO
Message text
YKN000T TSO
RC=48
YKN001E TSO
RC=48
YKN001E MSG
SC=48 RC=48
YKN002E MSG
SC=48 RC=48
1-122
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKN002E TSO
RC=48
YKN010E TSO
RC=40
YKN050E MSG
SC=48 RC=48
(attribute-value)
YKN099I TSO
Message text
YKP000T TSO
RC=48
YKP001E TSO
RC=48
YKP001E MSG
SC=48 RC=48
YKP002E MSG
SC=48 RC=48
stem
Stem name assigned to the STEM parameter
YKP002E TSO
RC=48
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-123
Message ID
Message text
YKP002E MSG
SC=48 RC=48
YKP003E MSG
SC=48 RC=48
YKP010E TSO
RC=40
YKP065E MSG
SC=36 RC=36
YKP099I TSO
Message text
YKQ000T TSO
RC=48
YKQ001E TSO
RC=48
YKQ001E MSG
SC=48 RC=48
1-124
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YKQ002E MSG
SC=48 RC=48
Message text
Copy Group STEM(stem)
does not include trailing "."
YKQ002E MSG
SC=48
YKQ002E TSO
RC=48
YKQ003E MSG
SC=48
Parameters combination is
invalid
YKQ008E MSG
SC=48
YKQ010E TSO
RC=40
YKQ018E MSG
SC=16 RC=16
(pair-index)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-125
Message ID
YKQ019W MSG
SC=12 RC=0
(pair-index)
Message text
Primary volume serial
changed. DEVN
device#(SN,CU#,CCA#)
YKQ021E MSG
SC=12 RC=20
(pair-index)
TCA or SI Primary is
simplex, secondary not.
DEVN
device#(SN,CU#,CCA#)
YKQ026W MSG
SC=8 RC=8
(pair-index)
1-126
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKQ099I TSO
Message text
YKR000T TSO
RC=48
YKR001E TSO
RC=48
YKR001E MSG
SC=48 RC=48
YKR002E MSG
SC=48 RC=48
stem
Stem name assigned to the STEM parameter
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-127
Message ID
Message text
YKR002E MSG
SC=48
YKR002E TSO
RC=48
YKR008E MSG
SC=48
YKR010E TSO
RC=40
YKR050E MSG
SC=36 RC=48
(attribute-value)
YKR058E MSG
SC=36 RC=48
YKR099I TSO
YKR103E MSG
SC=48
Parameters combination is
invalid
Message text
YKS001E TSO
RC=48
YKS002E TSO
RC=48
1-128
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKS003E TSO
RC=52
YKS003E TSO
RC=52
YKS004E MSG
SC=48 RC=48
YKS005E MSG
SC=48 RC=48
YKS006E MSG
SC=48 RC=48
YKS079E MSG
SC=44 RC=44
(result)
YKS085E MSG
SC=44 RC=44
YKS086E MSG
SC=44 RC=44
(file)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-129
Message ID
Message text
ALLOCATION FAILED
Creation of a configuration file failed. Check the
free device capacity and the available size of VTOC.
For details about the required device capacity for a
configuration file, see the Hitachi Business
Continuity Manager Reference Guide.
UNAVAILABLE DATASET
The configuration file is being used. Check the
usage of the configuration file.
YKS099I MSG
TSO SC=maxseverity
RC=max-value
YKSTORE Processing
Complete.
Message text
YKS203E TSO
RC=52
YKS203E TSO
RC=52
1-130
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKS250E MSG
SC=36 RC=36
YKS260E MSG
SC=44 RC=44
YKS270E MSG
SC=44 RC=44
Failed to operation
configuration file. (name
=dataset-name, dsstate)
CREATE
An error occurred during the creation of the
configuration file.
UPDATE
An error occurred during the update of the existing
configuration file.
ALLOCATION
An error occurred during the allocation of the
configuration file. Check the free capacity on the
device and the available size of VTOC. For details
about the required capacity on the device for a
configuration file, see the Hitachi Business
Continuity Manager Reference Guide.
CHECK
An error occurred during the check of the existing
configuration file. Check the status of the
configuration file. The error might have occurred
because the configuration file is in an unusable
state, or the dataset format is invalid. If the
dataset format is invalid, check the message that
was output simultaneously.
EXECIO
An error occurred while writing to the configuration
file. For the cause of the error, check the message
that was output simultaneously.
RENAME
An error occurred when the YKBTSCAN command
was executed, and the configuration file was being
renamed to the name displayed in dataset-name.
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-131
Message ID
Message text
EXTENT=extent
The number of extents of the dataset that is
currently allocated
extent indicates the number of extents that are
allocated to the dataset indicated by datasetname.
DSORG=VSAM
The dataset format is VSAM. A dataset with the
format VSAM cannot be used as a configuration
file. Change the dataset format of the
configuration file into PS.
RECFM=XX
RECFM value of the dataset
LRECL=XX
LRECL value of the dataset
BLKSIZE=XX
BLKSIZE value of the dataset
YKS285E MSG
SC=48 RC=48
YKS290E MSG
SC=44 RC=44
(result)
YKS298E MSG
SC=44 RC=44
(detailed-info)
1-132
YKSTORE encountered an
unexpected error.
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
detailed-info
Detailed information displayed to assist your
Hitachi Data Systems representative or authorized
service provider in resolving the problem
Message text
Can't find SVCTABLE
YKT002E CON
YKT003E CON
YKT004E CON
YKT005E CON
YKT006W CON
RC=16
YKT007W CON
RC=16
YKT008E CON
RC=20
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-133
Message ID
Message text
YKT008E CON
RC=20
YKT012E CON
RC=16
Name/token error
YKT021E CON
RC=20
Invalid parameter
YKT022E CON
RC=4
YKT023E CON
RC=16
YKT024E CON
YKT025E CON
RC=4
YKT026E CON
YKT026E CON
YKT032E CON
RC=20
YKT098I CON
RC=0
YKT099I CON
RC=0
1-134
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message text
System task started without
START from TSO.
YKT211E CON
RC=12
YKT212E CON
RC=12
YKT213E CON
RC=4
YKT219E CON
RC=16
YKT220E CON
RC=8
Unknown keyword is
specified
YKT221E CON
RC=4
YKT222E CON
RC=4
YKT223E CON
RC=4
YKT226E CON
RC=4
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-135
Message ID
YKT230E CON
RC=4
Message text
The specified YKLCNS2 value The value specified for the YKLCNS2 parameter is
is invalid.
invalid. The program will ignore the specification and
continue processing.
A maximum of 8 characters can be specified. Specify a
correct value, and then retry the operation.
YKT232E CON
RC=12
YKT299I CON
SC=0
Message text
BC Manager environment
variables (version)
YKT401I CON
variable : value
value
Value set for each of the Business Continuity
Manager environment variables
YKT402I CON
1-136
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKT403I CON
Message text
YKU000T TSO
RC=48
YKU001E TSO
RC=48
YKU001E MSG
SC=48 RC=48
YKU002E MSG
SC=48 RC=48
stem
Stem name assigned to the STEM parameter
YKU002E MSG
SC=48
YKU002E MSG
SC=48
YKU002E TSO
RC=48
YKU002E MSG
SC=48
YKU003E MSG
SC=48 RC=48
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-137
Message ID
Message text
YKU003E MSG
SC=48 RC=48
SVOL(PROTECT|PERMIT)
option required
YKU004E MSG
SC=48 RC=48
ATTIME Specification is
before current time.
YKU005E MSG
SC=48 RC=48
ATTIME Specification is more The time assigned to the ATTIME parameter is more
than 45.5 days into the
than 65,535 minutes (45.5 days) past the present
future.
time.
YKU008E MSG
SC=48
YKU008E MSG
SC=48
YKU009E MSG
SC=48
YKU009E MSG
SC=48
YKU010E TSO
RC=40
YKU050E MSG
SC=36 RC=48
(attribute-value)
YKU054E MSG
SC=36 RC=48
YKU055E MSG
SC=48 RC=48
YKU055E MSG
SC=48 RC=48
Specify PURGE and VOLUNIT The PURGE and VOLUNIT parameters cannot be specified
parameter exclusively for UR simultaneously for a Universal Replicator copy group.
Copy Group
YKU056E MSG
SC=48 RC=48
YKU057E MSG
SC=36 RC=48
1-138
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKU058E MSG
SC=36 RC=48
YKU099I TSO
Message text
YKV000T TSO
RC=48
YKV001E TSO
RC=48
YKV001E MSG
SC=48 RC=48
YKV002E MSG
SC=48 RC=48
stem
Stem name assigned to the STEM parameter
YKV002E MSG
SC=48
YKV002E TSO
RC=48
YKV008E MSG
SC=48
YKV010E TSO
RC=40
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-139
Message ID
Message text
YKV050E MSG
SC=36 RC=48
(attribute-value)
YKV058E MSG
SC=36 RC=48
YKV099I TSO
Message text
YKW001W TSO
YKW002E TSO
YKW003E TSO
Unexpected transition of
group copy-group pair index
device xxxx to state state.
YKW006E TSO
1-140
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKW007E TSO
YKW008E TSO
YKW009W TSO
YKW010E TSO
Processing error
An error occurred during execution of the YKWATCH
encountered. Reason code = command. The YKCONMSG command issued within the
rrrr
YKWATCH command cannot be executed correctly.
rrrr
Return code of the YKCONMSG command
For details, see the description for the YKCONMSG
command in the Hitachi Business Continuity
Manager Reference Guide.
YKW098E TSO
Invalid parameter-reasonmessage
YKW099I TSO
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-141
Message text
Supplied parameters invalid
YKX001E TSO
YKX001E MSG
SC=48
YKX002E TSO
YKX010E TSO
RC=40
YKX065W MSG
SC=4 RC=0
YKX066E MSG
SC=48 RC=48
YKX099I TSO
1-142
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message text
YKX100T TSO
RC=48
YKX101E MSG
SC=48
No application id APID()
supplied
YKX101E MSG
SC=48
YKX101E MSG
SC=48
YKX101E MSG
SC=48
YKX101E TSO
RC=48
YKX101E MSG
SC=48
YKX102E TSO
RC=48
stem
Stem name assigned to the MSG parameter
YKX103E MSG
SC=48
Parameter combination is
invalid
YKX104E MSG
SC=48
Device# DEVN() is not found The device specified in the DEVN parameter does not
exist, or a device other than DASD or a PAV ALIAS
volume has been specified.
YKX108E MSG
SC=48
YKX108E MSG
SC=48
YKX108E MSG
SC=48
YKX108E MSG
SC=48
YKX110E TSO
RC=40
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-143
Message ID
Message text
YKX166E MSG
SC=48
YKX199I TSO
Message text
YKX200T TSO
RC=48
YKX201E MSG
SC=48
YKX201E MSG
SC=48
YKX201E MSG
SC=48
YKX201E TSO
RC=48
YKX201E MSG
SC=48
No model SMODEL()
supplied
YKX201E MSG
SC=48
YKX201E MSG
SC=48
YKX201E MSG
SC=48
YKX202E TSO
RC=48
stem
Stem name assigned to the MSG parameter
YKX202E MSG
SC=48
YKX203E MSG
SC=48
1-144
Parameter combination is
invalid
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKX204E MSG
SC=48
Device# DEVN() is not found The device specified in the DEVN parameter does not
exist, or a device other than DASD or a PAV ALIAS
volume has been specified.
YKX208E MSG
SC=48
YKX208E MSG
SC=48
YKX208E MSG
SC=48
YKX210E TSO
RC=40
YKX266E MSG
SC=48
YKX299I TSO
Message text
AGENT STARTED (Vv.r.r[zz])
YKY002I CON
INVALID INITIALIZATION
PARAMETER: parametername
YKY003I CON
INVALID CONTINUATION
LINE FOUND. PARAMETER
SCAN TERMINATED
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-145
Message ID
YKY005I CON
Message text
AGENT INITIALIZATION
FAILED P=termination-code
YKY008I CON
INSUFFICIENT SPACE
AVAILABLE FOR
INITIALIZATION
YKY016I CON
TASK(task-ID)
A task terminated abnormally during the Business
ABENDED,CODE=completion Continuity Manager agent start up. The Business
-code
Continuity Manager agent will be terminated.
task-ID
Name of the task
completion-code
System completion code
YKY018I CON
YKY019I CON
dd-name DD STATEMENT
NOT FOUND
1-146
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YKY020I CON
Message text
THE PROFILE IS NOT
DEFINED IN THE FACILITY
CLASS OF RACF: xxxxxxxx
YKY021I CON
A NAME/TOKEN WRITE
ERROR
OCCURRED,RC=returncode,NAME=name
YKY022I CON
YKY051I CON
AGENT ENDED
YKY052I CON
AGENT IN SCHEDULED
SHUTDOWN
YKY053I CON
AGENT ABENDED
Message text
YKY100I CON
MODIFY COMMAND
ACCEPTED
YKY101I CON
YKY102I CON
YKY103I CON
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-147
Message ID
YKY104I CON
Message text
OPERAND IS INCORRECT
YKY111I CON
parameter-name WAS
CHANGED
YKY114I CON
parametername=parameter-value
YKY130I CON
SESSION NO.=sessionnumber
YKY131I CON
port-number
IP-address
YKY132I CON
CONNECTING START
TIME=YYYY/MM/DD
hh:mm:ss
YKY133I CON
LAST data-direction-type
TIME=YYYY/MM/DD
hh:mm:ss
1-148
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YYYY/MM/DD hh:mm:ss
Time (local time)
Message text
hh:mm:ss task-ID,TCP
CONNECTION ACCEPTED
YKY301I SYS
hh:mm:ss task-ID,TCP
CONNECTION ENDED
NORMALLY
YKY304I SYS
hh:mm:ss task-ID,REQUEST
DENIED,REASON=(reasonfor-denial)
YKY305I CON
task-ID,TCP CONNECTION
LOST DURING EVENT
PROCESSING,TCPSTATUS=(reason-fordisconnection)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-149
Message ID
YKY307I SYS
Message text
hh:mm:ss task-ID,TCP
CONNECTION
INFORMATION,REMOTEHOST=IP-address,REMOTEPORT=remote-portnumber,LOCAL-PORT=localport-number
YKY315I CON
task-ID,COMMUNICATION
ERROR,@API[,requestname[,RC=response-code]]
[,EC=event-code]
[,SRC=local-IPaddress:local-port-number]
[,DST=connection-target-IPaddress:connection-targetport-number]
@OPNSAP: Preprocessing
@QUIT: Postprocessing
response-code
Code generated during the request shown as
request-name
event-code
Event that occurred during the TCP/IP session
local-IP-address
IP address of the local host
local-port-number
Port number of the local host
connection-target-IP-address
1-150
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKY321I CON
task-ID,COMMUNICATION
TIMED OUT
YKY330I CON
"ACCEPT "
"BIND "
"CLOSE "
"INITAPI "
"IOCTL "
"LISTEN "
"RECV "
"SETSOCKOPT "
"SOCKET "
YKY500I SYS
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-151
Message ID
Message text
YKY501E XML
file
Name of the disk configuration definition file in
which an error occurred
YKY502E XML
2.
3.
file
Name of the configuration file in which an error
occurred
YKY503E XML
1-152
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
file
Name of the temporary file in which an error
occurred
YKY507E XML
file
Name of the route list definition file in which an
error occurred
Message text
INSUFFICIENT SPACE
AVAILABLE. maintenanceinformation
YKY604I CON
IRXJCL MODULE
ERROR,CODE=return-code
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-153
Message ID
Message text
YKY605I CON
IRXINIT MODULE
ERROR,CODE=returncode,R0=abnormaltermination-code-andreason-code-for-abnormaltermination,PARM7=reasoncode
abnormal-termination-code-and-reason-code-forabnormal-termination
IRXINIT returns the abnormal termination code set
in the two trailing bytes of R0. IRXINIT returns the
reason code for abnormal termination set in the
two leading bytes of R0. If the reason code for
abnormal termination is larger than two bytes,
IRXINIT returns only the two trailing bytes of the
reason code for abnormal termination. For details
about the abnormal termination code and reason
code, see the MVS System Codes.
reason-code
For details about the reason code, see the TSO/E
REXX Reference.
YKY606I CON
IRXTERM MODULE
ERROR,CODE=returncode,R0=abnormaltermination-code-andreason-code-for-abnormaltermination
1-154
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKY680I SYS
hh:mm:ss taskID,command,RC=returncode[,text]
YKY699I CON
yy-mm-dd
REGISTERS AT TIME OF
FAILURE
hh:mm:nn
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-155
Message ID
Message text
pppppppp pppppppp
PSW during the abnormal termination
ll
Length of command during the abnormal
termination
xx
Interrupt code during the abnormal termination
Message text
YKY706E XML
YKY707E XML
YKY713E XML
1-156
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YKY714E XML
Message text
An invalid parameter
'parameter-name' was
specified in the XML request
element 'element-name'.
YKY715E XML
YKY716E XML
YKY717E XML
A required element is
missing from the request.
'element'
YKY718E XML
A required parameter is
missing from the element
'element-name' of the
request. 'parameter-name'
YKY719E XML
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-157
Message ID
YKY720E XML
Message text
The request failed because
the prefix 'prefix' was not
found in the Agent
initialization parameter.
YKY726E XML
YKY727E XML
YKY728E XML
YKY729E XML
The information in
configuration file was
updated after you obtained
it.
1-158
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YKY730E XML
YKY999E TSO
CON
Message text
INVALID CT Group is
specified.
Message text
YKZ000T TSO
SC=48
YKZ001E TSO
MSG SC=48
No parameter-name()
supplied
YKZ002E MSG
SC=48
YKZ003E MSG
SC=48
parameter-name() value
invalid
YKZ004E MSG
SC=48
YKZ008E MSG
SC=48
YKZ010E MSG
SC=48
YKZ050E MSG
SC=36 RC=36#
(attribute-value)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-159
Message ID
Message text
YKZ066E MSG
SC=48 RC=48
YKZ099I TSO
SC=0
command-name command
return code=nnnn, reason
code=rrrr
nnnn
Maximum among the severity codes returned
during command execution
Message text
YKZ103E MSG
SC=48
Parameters combination is
invalid
YKZ201E MSG
CON PRT SC=44
RC=44#
1-160
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ202E MSG
TSO CON SC=52
RC=0
YKZ203E TSO
RC=40#
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-161
Message ID
Message text
YKZ204E TSO
RC=40#
A REXX write error occurred. The command cannot be executed because an REXX
(return code=nnn, name=
write error occurred.
name, value=value,
If the error still exists after the above action has been
taken, contact your Hitachi Data Systems
representative or authorized service provider.
nnn (decimal number)
Return code from the OS's REXX variable access
routine
name (string)
REXX variable name
value (string)
REXX variable value
xxx (decimal number)
Command code of the command that was
executing when the error occurred
See the command code description in the
explanation of the YKZ201E message.
yyy (string)
Maintenance information
# If this message is output while the YKLOAD command
is being executed, the RC is 44.
YKZ205E TSO
RC=0
1-162
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ206E TSO
RC=0
YKZ207E MSG
TSO CON SC=52
RC=44#
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-163
Message ID
Message text
YKZ208I TSO
CON PRT RC=0
The Core
processing( process )
started.
(DATE=yyyy/mm/dd,
TIME=hh:mm:ss.th,
TOD=ttt, cmd=xxx,
pos=yyy)
YKZ209I TSO
CON PRT RC=0
The Core
Core processing is terminating.
processing( process ) ended. process (string)
(DATE=yyyy/mm/dd,
Processing name
TIME=hh:mm:ss.th,
TOD=ttt, cmd=xxx,
yyyy/mm/dd (string)
pos=yyy)
GMT date
hh:mm:ss.th (string)
GMT time
ttt (string)
GMT time format
xxx (decimal number)
Command code of the command that was
executing when the error occurred
See the command code description in the
explanation of the YKZ201E message.
yyy (string)
Maintenance information
1-164
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message text
YKZ210E MSG
TSO CON SC=40
RC=44#
YKZ211E MSG
CON SC=40
RC=44#
YKZ212W CON#
RC=0
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-165
Message ID
Message text
YKZ215W MSG
CON SC=0 RC=0
YKZ216E TSO
RC=0
YKZ217E MSG
CON PRT SC=0
RC=0
1-166
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ217E MSG
CON PRT SC=0
RC=0
YKZ218I CON
PRT RC=0
YKZ219W CON
RC=0
YKZ220T MSG
SC=36 RC=36#
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-167
Message ID
Message text
YKZ220T MSG
SC=36 RC=36#
YKZ220T MSG
SC=36 RC=36#
YKZ220T MSG
SC=36 RC=36#
Number of pair-groups value The number of copy pairs contained in the copy group
null or invalid.
structure is NULL or invalid. Correct the configuration
file, and then re-execute the YKLOAD command.
value
REXX variable value
# If this message is output while the YKLOAD command
is being executed, the RC is 44.
YKZ220T MSG
SC=36 RC=44
YKZ222E MSG
SC=36 RC=36#
(pair-index)
1-168
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ224E MSG
SC=8 RC=36#
(pair-index)
YKZ224E MSG
SC=12 RC=36#
(pair-index)
YKZ225E MSG
SC=36 RC=36#
YKZ226E MSG
SC=36 RC=48#
stemTCA_MAP=TRK not
supported by some group
pairs
YKZ227E MSG
SC=36 RC=36#
YKZ228E MSG
SC=36 RC=36#
(pair-index)
Invalid pair attribute name = The value of the REXX variable is invalid.
value
Check that the value is specified according to the
following rules:
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-169
Message ID
Message text
name
REXX variable name
value
Value
pair-index
See the pair index description in the explanation of
the YKE003E message.
# If this message is output while the YKLOAD command
is being executed, the RC is 44.
YKZ229I MSG
SC=0 RC=0
YKZ230W MSG
SC=4 RC=4
(pair-index)
Management for the relevant Processing for the volume was skipped because the
volume was skipped. DEVN
status of the volume did not allow this command to be
device#(SN,CU#,CCA#)
executed. If 0 is displayed in the location that indicates
the copy pair corresponding to the pair-index, multiple
volumes within the copy group have been skipped.
Change the status of the copy pairs to a status that
allows this command to be executed.
device#
Device number
If the device cannot be identified, **** is
displayed.
SN
Storage system serial number
If the device cannot be identified, ************ is
displayed.
CU#
Control unit number
If the device cannot be identified, ** is displayed.
CCA#
Command control address number
If the device cannot be identified, ** is displayed.
pair-index
See the pair index description in the explanation of
the YKE003E message.
YKZ231E MSG
SC=44 RC=44
1-170
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ232T MSG
SC=36 RC=44
YKZ233E MSG
SC=36 RC=36#
(attribute-value)
YKZ234E MSG
SC=36 RC=36#
YKZ235E MSG
SC=36 RC=36#
YKZ236E MSG
SC=36 RC=36#
YKZ237E MSG
SC=36 RC=36#
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-171
Message ID
Message text
YKZ238E MSG
SC=36 RC=44
YKZ239E MSG
SC=48 RC=48
YKZ240E MSG
SC=48
YKZ241W MSG
SC=4 RC=0
YKZ242E MSG
SC=48 RC=48
YKZ244E MSG
SC=36 RC=36
YKZ245E MSG
SC=48 RC=48
CopyGroup attribute
combination is invalid.
YKZ246E MSG
SC=48 RC=48
1-172
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ247E MSG
SC=44 RC=44
YKZ248E MSG
SC=44 RC=0
YKZ249E MSG
SC=48 RC=48#
(pair-index)
Message text
A NAME/TOKEN delete error
occurred. (return code=nnn,
name= name, cmd=xxx,
pos=yyy)
YKZ251E MSG
SC=32 RC=32
(pair-index)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-173
Message ID
Message text
message-text. (code1 code2, Check the status of the error device, correct any errors
cmd=xxx, pos=yyy)
related to the configuration or execution conditions,
and then re-execute the command.
device-number-1 (string)
The device that issued I/O
device-number-2 (string)
The device to be manipulated
If the device number of the device to be operated
is not found, **** is displayed.
message-text (string)
Message text
code1 (Hexadecimal number)
Subcommand code
code2 (Hexadecimal number)
Error code
For details about error codes, see XXX.
xxx (decimal number)
Command code of the command that was
executing when the error occurred
See the command code description in the
explanation of the YKZ201E message.
yyy (string)
Maintenance information
pair-index
See the pair index description in the explanation of
the YKE003E message.
YKZ252E MSG
SC=8 RC=8
1-174
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ253E MSG
SC=32 RC=32
(pair-index)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-175
Message ID
Message text
YKZ254E MSG
SC=8 RC=8
YKZ255E MSG
SC=32 RC=32
(pair-index)
1-176
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ256E MSG
SC=8 RC=8
YKZ257E MSG
SC=32 RC=32
(pair-index)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-177
Message ID
Message text
YKZ258E MSG
SC=8 RC=8
1-178
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YKZ259E MSG
SC=48 RC=48#
Message text
This product is already
executing.
Message text
YKZ260I MSG
SC=0 RC=0
YKZ261E MSG
CON SC=0 RC=0
YKZ262E MSG
CON SC=0 RC=0
YKZ263E MSG
CON SC=0 RC=0
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-179
Message ID
Message text
YKZ264E MSG
CON SC=0 RC=0
YKZ265E MSG
SC=48 RC=48
YKZ266I PRT
RC=0
YKZ267E MSG
CON SC=0 RC=0
1-180
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YKZ268E MSG
CON PRT SC=0
RC=0
Message text
Incorrect dataset format.
(DD name=ddd, KKK=AAA
must be BBB, cp=xxx:yyy)
Message text
Duplicate logical paths exist.
YKZ271E MSG
SC=12 RC=12
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-181
Message ID
Message text
YKZ272W MSG
SC=8 RC=8
Variable(s) were changed for For the port numbers and number of physical paths,
the number of paths or
update the REXX variable, which indicates the port
portID.
numbers and number of physical paths, to match the
settings on the storage system.
YKZ273E MSG
SC=36 RC=36
YKZ274E MSG
SC=36 RC=36
(index1, index2,
index3)
YKZ274E MSG
SC=36 RC=36
1-182
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
(index1, index2,
index3)
YKZ275E MSG
SC=36 RC=36
YKZ276E MSG
SC=36 RC=36
YKZ277W MSG
SC=4 RC=4
YKZ278W MSG
SC=8 RC=8
YKZ279W MSG
SC=12 RC=12
Message text
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-183
Message ID
Message text
YKZ280W MSG
SC=0 RC=0
YKZ281E MSG
Some of the storage systems
SC=36 RC=36#1 do not support Remote
Control.
(Storage
System's-IFType)
YKZ282E MSG
SC=36 RC=36#1
YKZ282E MSG
SC=36 RC=36#1
1-184
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ283T MSG
SC=36 RC=36#
YKZ284T MSG
SC=36 RC=36#
YKZ285I MSG
SC=0 RC=0
(index)
YKZ286E MSG
SC=36 RC=36
(index)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-185
Message ID
Message text
YKZ287T MSG
SC=36 RC=36#
YKZ288E MSG
SC=36 RC=36
Some of the storage systems A path-controlled storage system does not support
do not support Path Group
path group IDs (path IDs for which values other than
ID.
00 are specified). Revise the definition associated with
whether the storage system can use path group IDs#.
Also, if a scan was not performed after the storage
system microcode was changed, perform a scan.
#
Path group IDs can be used for storage systems
for which IFType is X'3333' or higher.
YKZ291I CON
SC=0 RC=0
Message text
1-186
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
YKZ292I CON
SC=0 RC=0
Message text
The log dataset was
switched. (from=YKLOGmm,
to=YKLOGnn, job=jjj,
cp=xxx:yyy)
YKZ293E MSG
CON SC=0 RC=0
YKZ294E MSG
CON SC=0 RC=0
YKZ295E MSG
SC=36 RC=36
YKZ296E MSG
SC=44 RC=44
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-187
Message ID
Message text
JNLG (string)
The journal type not being registered (the journal
type of the definition, rather than of the storage
system)
R-JNL: Journal of the secondary site
M-JNL: Journal of the primary site
jj (hexadecimal number)
The journal group number (00-FF) specified by the
consistency group ID or sub consistency group ID
m (decimal number)
Mirror ID (0-3)
e (decimal number)
EXCTG ID (0-3)
ssssssssssss (decimal number)
1-188
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ297E MSG
SC=44 RC=44
YKZ298W MSG
SC=4 RC=4
YKZ299E MSG
SC=36 RC=36
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-189
Message ID
Message text
SN=ssssssssssss,
CDEV=cccc)
Message text
SVC # is null or invalid.
1-190
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ300E MSG
TSO SC=44
RC=44
YKZ301E CON
The task is not authorized to The task is not authorized to execute a CLI command.
execute the request. (reason The program will terminate.
code=XXYYZZZZ)
For details about how to set CLI command execution
permissions, see the Tiered Storage Manager for
Mainframe User Guide.
XXYYZZZZ
Reason code
If the reason code is 00000010, 00000040, or
000000C0:
The user might not have been given the
permissions to view the
STGADMIN.YKA.DKT.COMMANDS profile or the
STGADMIN.YKA.DKT.KTQUERY profile. Check and, if
necessary, revise the profile setting.
If the reason code is 00000050 or 000000D0:
The user might not have been given the
permissions to view the
STGADMIN.YKA.DKT.COMMANDS profile. Check and, if
necessary, revise the profile setting.
If the reason code is other than the above:
The information returned from the RACROUTE
REQUEST=AUTH macro is displayed in the following
format. For details, see the Security Server
RACROUTE Macro Reference.
- XX: Lower 1 byte of SAF RC of the RACROUTE
macro
- YY: Lower 1 byte of RACF RC of the RACROUTE
macro
- ZZZZ: Lower 2 bytes of RACF Reason Code of the
RACROUTE macro
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-191
Message ID
YKZ301E CON
RC=128
Message text
The task is not authorized to The task is not authorized to execute a CLI command.
execute the request. (reason The program will terminate abnormally with user
code=reason)
completion code 128 or will return an error.
reason
Reason code
For details, see the description for that user
completion code.
For details about how to set CLI command execution
permissions, see the Hitachi Business Continuity
Manager Installation Guide.
YKZ310I SYS
hh:mm:ss command
YKZ311I SYS
YKZ320E TSO
YKZ321E TSO
YKZ322E TSO
YKZ330E TSO
CON RC=64
1-192
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ331E TSO
RC=64
YKZ332E TSO
RC=64
YKZ333E TSO
RC=64
YKZ340T TSO
RC=48
YKZ341E TSO
RC=48
No DEVN() supplied.
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-193
Message ID
Message text
YKZ343E TSO
RC=48
YKZ350T TSO
RC=16
YKZ351E TSO
RC=16
YKZ352E TSO
RC=16
YKZ353E TSO
RC=64
YKZ354I TSO
RC=8
YKZ370E MSG
SC=32 RC=32
A dynamic configuration
change was detected during
specified command
processing. DEVN device#
YKZ371I TSO
YKZ371I TSO
Message text
param parameter cannot be
specified for copy-type Copy
Group.
1-194
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ401E MSG
SC=48 RC=48
Some of the storage systems The storage system which the command is issued onto,
do not support param.
or the storage system which uses the Remote DKC
Control Function, does not support the parameter
indicated by param.
Use a device which supports the parameter indicated
by param. Also, if a scan has not been performed after
the storage system microcode was replaced, perform
another scan.
param (string)
The parameter name which is not supported
YKZ402E MSG
SC=44 RC=44
Unexpected transition
occurred while adding JNLG
to EXCTG. (CT ID=jj, sub CT
ID=kk, MIRROR=m,
SN=ssssssssssss,
STATE=nnnn)
YKZ403I MSG
SC=0 RC=0
YKZ404E MSG
SC=36 RC=36#
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-195
Message ID
YKZ405E MSG
SC=36 RC=36#
Message text
YKZ406E MSG
SC=36 RC=36#1
YKZ406E MSG
SC=36 RC=36#1
YKZ407E MSG
SC=24 RC=24
1-196
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
CODE=eeee, TIME=ATTIMEsuspend-time)
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-197
Message ID
Message text
YKZ408E MSG
SC=24 RC=24
An unexpected UR pair
status existed during
suspension of UR ATTIME.
(CT ID=ii, R-JNL=jj,
GENID=gg, ATTSTS=aa,
SISTS=ss, URSTS=uu,
CODE=eeee, TIME=ATTIMEsuspend-time)
1-198
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ409E MSG
SC=24 RC=24
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-199
Message ID
Message text
Message text
YKZ410E MSG
SC=36 RC=36#1
YKZ411E MSG
SC=36 RC=48
ATOPT(UR) parameter is
only valid for SI Copy
Groups with C/T ID.
YKZ412E MSG
SC=36 RC=48
1-200
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ413E MSG
SC=36 RC=36#1
YKZ414E MSG
SC=36 RC=48#1
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-201
Message ID
Message text
YKZ415E MSG
SC=48 RC=48
YKZ416E MSG
SC=36 RC=36#1
1-202
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
Message ID
Message text
YKZ417E MSG
SC=48 RC=48
YKZ418E MSG
SC=48 RC=48
YKZ419E MSG
SC=48 RC=48
YKZ420E MSG
SC=48 RC=48
EXCTG information could not EXCTG information could not be acquired because no
be acquired because no
EXCTG ID for copying in the forward direction is
EXCTG ID is specified for
specified. The YKQEXCTG command with the
copying in the forward
TO(SECONDARY) parameter is valid only when copying
direction.
in the forward direction and for copy group containers
with an EXCTG ID for the forward direction. Check the
copy direction of the copy group container and the
EXCTG ID direction (Forward or Reverse), and then reexecute the command.
YKZ421E MSG
SC=48 RC=48
EXCTG information could not EXCTG information could not be acquired because no
be acquired because no
EXCTG ID for copying in the reverse direction is
EXCTG ID is specified for
specified. The YKQEXCTG command with the
copying in the reverse
TO(PRIMARY) parameter is valid only when copying in
direction.
the reverse direction and for copy group containers
with an EXCTG ID for the reverse direction. Check the
copy direction of the copy group container and the
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-203
Message ID
Message text
YKZ422E MSG
SC=48 RC=48
This operation(operation) is
not available for a Non
Gen'ed volume.
YKZ910I CON
command
YKZ911I CON
command RC=rc
YK8310I PRT
REPORT SUMMARY:
COPY GROUP : <cgid>
PREFIX : <prefix>
DAD-ID : <dad>
TYPE : <cgtype>
GROUP STATUS
SIMPLEX : <simplexct>
MATCHING%
PENDING : <pendingct>
REVERSED%
DUPLEX : <duplexct>
ATTIME
SUSPEND : <suspendall>
-STATUS
OTHER : <otherct>
:
:
:
:
:
<status>
<match>
<rev%>
<attime>
<attms>
1-204
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
YK8312I PRT
REPORT DETAIL:
COPY GROUP : <a>
PREFIX : <b>
DAD-ID : <c>
TYPE : <d>
PRI
SEC
VOLSER DEVN DIR DEVN STATUS
[ <e>
<f> <g> <h> <i>
C/T
TIME
<n> ]
>: Primary-to-secondary
<: Secondary-to-primary
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-205
YK8314I PRT
REPORT RPO:
COPY GROUP : <a>
C/T SUB PRI- SECID C/T SN
SN
[ <b> <c> <d>
<e>
C/T
DELTA
<f>
C/T
TIME
<g> ]
YK8316I PRT
REPORT STATS:
COPY GROUP :
PREFIX :
DAD-ID :
TYPE :
C/T
ID
[ <e>
PRISN
<f>
<a>
<b>
<c>
<d>
SECSN
<g>
The results of REPORT(STATS) for the TrueCopy Asynchronous copy group are
displayed.
<a>: Copy group ID
<b>: Prefix
<c>: Copy group host device address domain ID
<d>: Copy group type
1-206
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
YK8318I PRT
REPORT STATS:
COPY GROUP : <a>
PREFIX : <b>
DAD-ID : <c>
TYPE : <d>
MJNL RJNL
C/T SUB PRI- SECID
C/T SN
SN
[ <e> <f> <g>
<h>
The results of REPORT(STATS) for the Universal Replicator copy group are
displayed.
<a>: Copy group ID
<b>: Prefix
<c>: Copy group host device address domain ID
<d>: Copy group type
<e>: Master journal group ID
<f>: Restore journal group ID
<g>: Serial number of the primary storage system
<h>: Serial number of the secondary storage system
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-207
<i>: Data transfer rate (Kbps) between the main control unit and the remote
control unit
<j>: Master journal volume metadata usage rate
<k>: Master journal volume data usage rate
<l>: Restore journal volume metadata usage rate
<m>: Restore journal volume data usage rate
<n>: Master journal volume data capacity (GB)
<o>: Restore journal volume data capacity (GB)
YK8411I PRT
SYSTEM OPTIONS:
CYCLE TIME
WAITFOR TIMEOUT
MSGLEVEL
ONACTIONERROR
STOP AT STOPPOINT
SLEEP AT STOPPOINT
:
:
:
:
:
:
<cycletime>
<timeout>
<lvllog>,<lvlcons>
<err-action>
<stoppt>
<sleeppt>
YK8413I PRT
COPY GROUP DEFINITIONS:
ID : <cgid>
PREFIX : <prefix>
DAD-ID : <dad>
ROUTE LIST : <route>[,<route-label>]
MONITOR STATUS : <cgmonstat>
STARTUP STATUS : <cgsastat>,<cgsaact>,<cgsaopt>
[
WHEN STATUS <status> DO ACTION '<action><err-action>']
The values specified in the YKMONCG file are displayed. This message
appears a number of times, equal to the number of copy groups specified.
<cgid>: Copy group ID
1-208
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
<prefix>: Prefix
<dad>: Copy group host device address domain ID
<route>: Route list ID
<route-label>: Route label
<cgmonstat>: Copy group monitoring status (ACTIVE or INACTIVE)
<cgsastat>: Copy group startup status to be checked for starting BCM
Monitor
<cgsaact>: Startup action executed if the copy pair status for starting BCM
Monitor is different from the specified startup status
<cgsaopt>: Option information of the CGSTARTUPSTATUS parameter
<status> <action><err-action>:
Status, action, and error action for the copy group specified in STATUS
and ACTION
These parameters appear a specified number of times.
Count the CopyGroupContainer tags from the beginning of the file and
identify the CopyGroupContainer tag.
2.
3.
The SerialNum under the identified CopyPair tag is the volume serial
number to be processed.
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
1-209
Explanation
There is a problem with the issued CCW.
The version of the registered user SVC might be old. Check whether the latest user
SVC is registered by performing the following operations:
U0128
The user does not have the permission to execute CLI commands. The user might
not have been given permissions to view the profile required for executing the CLI
command, or an RACF error occurred.
The reason code is displayed in the following format:
1-210
An attempt was made to call a module that cannot be executed. There might be a
problem in the LINKLIB library settings. Specify the installation dataset for the
LINKLIB library.
Messages
Hitachi Tiered Storage Manager for Mainframe Messages
2
Storage system sense byte information
This chapter describes storage system sense byte information (error codes)
contained in messages.
Details of error codes
2-1
Y: Produces output
N: Produces no output
Error
code
2026
Error details
An SI copy pair cannot be
resynchronized (QuickRestore) because
all of the following conditions exist:
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
2043
2044
2060
2061
2-2
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
2067
2078
2079
2086
2089
208A
2097
20A2
20A3
20B4
2-3
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
20BD
20BE
20C5
20C9
20CA
20D0
20D1
20D6
2-4
Type of error
Error
code
Error details
20D7
20E4
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
22F6
22F7
22F9
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
2301
2309
2-5
Type of error
Error
code
2310
Error details
An SI copy pair status cannot be
changed because the status of the copy
pair does not allow a status transition.
The reason may be one of the
following:
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
2312
2313
2-6
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
2314
231B
231F
232A
2331
2332
2333
2334
2335
2336
2337
233A
2-7
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
233F
2343
2344
2346
2347
234A
2351
2352
2353
2354
2358
2-8
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
235B
235C
235D
2370
2371
2373
237B
2381
2383
2-9
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
2390
2391
2394
2395
2398
2399
239A
239B
239C
239D
239E
23A0
2-10
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
23BB
23EF
23F1
23F2
23F3
23F4
2-11
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
3613
3614
3616
3617
3618
3621
3640
2-12
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
3641
3642
3680
3681
3682
3685
3686
3688
3689
368A
2-13
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
3694
3695
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
3703
3704
3705
3706
3707
3709
370B
2-14
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
370D
3711
3720
3726
3728
3729
3734
2-15
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
3735
3737
3738
3739
373D
TC
FCV2/FCSE
Volume Migration
373E
3744
2-16
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
3753
3755
3756
Error
code
4600
Error details
A UR copy pair cannot be made.
Possible reasons include one or both of
the following:
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
N
2-17
Type of error
Error
code
4601
4602
4603
Error details
A UR copy pair cannot be suspended.
Possible reasons include one or both of
the following:
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
4606
4607
4608
460B
460C
2-18
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
4613
4614
4615
4616
4617
4618
4619
461A
461E
2-19
Type of error
Error
code
461F
Error details
The command device cannot be
deleted. The reason might be one of
the following:
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
4621
4630
4633
4639
463C
4645
4649
4650
2-20
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
4651
4660
4661
4662
4663
4665
4668
4669
466A
2-21
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
2.
3.
4.
466B
4672
4678
467A
467B
467C
4681
4684
2-22
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
47A3
47A4
47A6
47A7
47BA
4993
4995
49F8
49F9
49FA
Type of error
Error details
The C/T group ID specified for the TCA
C/T group option change is incorrect.
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
N
2-23
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
4A0B
4A0C
4A30
4A31
4A33
4A34
4A36
4A37
4A45
4A50
4A5C
4A82
2-24
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
4A8B
4A8C
4A8D
4A8E
4A96
4AB7
4ABD
4AC7
4AE2
4AFB
2-25
Error
code
4B02
Error details
A copy pair cannot be resynchronized
because the copy pair is in a status
that cannot be changed. The reason
might be one of the following:
A resynchronization cannot be
performed if it changes a copy
group that has a C/T group ID but
does not have an Open/MF
Consistency attribute to a copy
group without a C/T group ID.
A resynchronization cannot be
performed if it changes a copy
group without a C/T group ID to a
copy group that has a C/T group
ID but does not have an Open/MF
Consistency attribute.
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
4B03
4B04
4B06
4B07
2-26
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
4B0A
4B0B
4B0F
4B10
2-27
Type of error
Error
code
4B11
Error details
FREEZE cannot be executed for a copy
pair that is in a TC copy group with a
C/T group ID specified. The reason
might be one of the following:
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
4B14
4B15
4B32
4B35
4B36
4B37
2-28
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
4B38
4B49
4B85
4B86
4BA9
4BB1
4BB2
4BD1
4BD2
4BDE
4BE0
2-29
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
501C
64E2
64E3
64E8
64EA
64EE
64FA
64FB
64FC
2-30
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
64FD
64FF
69E4
69E6
69E7
69E8
69E9
69F2
69F3
2-31
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
69F5
69F7
69F8
69F9
69FB
69FC
69FE
69FF
6A00
6A07
6A08
6A09
2-32
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
6A0F
6A13
6A14
6A16
6A18
6A19
6A1E
6EC0
6EC1
6EC3
6EC4
2-33
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
6ECA
6ECC
6ECE
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
7F86
7FD4
2-34
Type of error
Error
code
8C12
Error details
A TC or TCA copy pair status cannot be
changed. Possible reasons include one
or more of the following:
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
N
2-35
Type of error
Error
code
8C1E
Error details
A UR copy pair cannot be made.
Possible reasons include one or both of
the following:
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8CE8
8CE9
8CEB
8CFB
8CFC
Error
code
8D00
2-36
Error details
A path cannot be established because
there is an invalid parameter.
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
N
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8D01
8D09
8D10
8D11
8D12
8D14
8D15
8D16
2-37
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8D17
8D1A
8D1B
8D1C
8D1D
2-38
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8D1E
8D20
8D21
8D22
8D25
8D26
8D27
2-39
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8D28
8D29
8D2A
2-40
SVOL(PERMIT)/Reverse Resync is
not supported.
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8D2C
8D30
8D31
8D38
8D39
8D3A
8D3D
8D3E
8D41
8D42
8D43
2-41
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8D44
8D45
8D46
8D47
8D4D
8D4E
8D4F
8D50
8D51
8D52
8D56
2-42
Type of error
Error
code
8D57
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8D58
8D59
8D5A
2-43
Type of error
Error
code
8D5B
Error details
An SI copy pair cannot be dissolved.
Possible reasons include one or more of
the following:
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8D70
8D71
8D78
8D79
2-44
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8D80
8DD1
8DF0
8DF1
8DF2
8DF3
8DF4
8DF5
8DF6
8DF7
8DFF
2-45
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8F00
8F10
8F14
8F17
8F18
8F19
8F1B
8F1C
8F1E
8F1F
8F21
2-46
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8F25
8F28
8F29
8F2A
8F2B
8F33
8F35
8F39
8F4D
8F50
2-47
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
8F58
8F67
8F6D
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C023
C026
C02B
C02C
C032
2-48
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C048
C04C
C04D
C055
C058
C059
C05A
C05D
C05E
C063
2-49
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C064
C065
C06A
C06D
C06E
C06F
C072
C073
C074
C078
C079
2-50
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C07A
C0A1
C0A2
C0B6
C0C5
C0C6
C0C7
C0F1
Error
code
C120
C122
Error details
An attempt to establish a path has
failed. Possible reasons include either
of the following:
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
2-51
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C123
C126
C127
C128
C129
C12A
C12B
C12C
C12D
C12E
2-52
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C162
C184
C189
C18A
C194
C195
C198
C199
C1BE
2-53
Error
code
C1D1
Type of error
Error details
The specified copy pair cannot be
suspended, resynchronized, or deleted
because a path is not set up between
CUs (SSIDs) in the copy pair, or the
path is in an error status.
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
N
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C211
C213
C214
C215
C21A
C22A
C23E
C28B
C28C
2-54
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C2A3
C2A4
C2A8
C2B3
C2B6
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C300
C301
C305
2-55
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C306
C30D
C310
C311
C312
C313
C314
C315
C316
C317
C318
C319
C31A
C31B
C31C
C31D
C31E
C320
C321
2-56
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C322
C324
C325
C326
C327
C328
C32A
C32B
C32C
C32E
C32F
C330
C332
C333
C335
C336
C337
C338
C339
C33A
2-57
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C33B
C33C
C33E
C33F
C35C
C370
C371
C372
C373
C374
C378
C379
C37B
C37C
C37D
2-58
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C37E
C37F
C380
C381
C382
C388
C38B
C38D
C38E
C390
C391
C392
C393
C394
C395
C398
C39E
2-59
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C39F
C3A0
C3A4
C3A5
C3A6
C3A8
C3AA
C3AB
C3AD
C3AE
C3AF
C3B1
C3B6
C3B7
C3BA
C3BD
C3BE
2-60
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C3BF
C3C0
C3C1
C3C2
C3C3
C3C4
C3C5
C3C6
C3C7
C3C9
C3CA
C3CB
2-61
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
C3CD
C3D1
C3D2
C3D3
C3D6
C3D7
C3D8
C3D9
C3DA
C3DB
C3FE
C4FC
C825
C8D1
2-62
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
HDT Othe
z
r
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
CB10
CB12
CB18
CB1D
CB1F
CB60
CB61
CB62
CB64
CB66
CB67
2-63
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
CB68
CB69
CB78
CB7E
CB9E
CBD8
CBD9
CBDC
CBDD
CBE2
CBE3
CBED
2-64
Type of error
Error
code
CBEE
CBF8
CBFA
CBFC
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
Error
code
DB02
Error details
A UR copy pair status cannot be
changed because the status transition
is not allowed.
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
N
2-65
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
DB07
DB08
DB09
DB0C
E80B
E826
E82F
E843
E869
2-66
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
E86D
E86E
E871
E876
E878
E87B
E87C
E87D
E87E
E880
2-67
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
E881
E882
E885
E888
E889
E890
E891
E894
E896
2-68
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
E898
E89A
E89B
E8A6
E8A7
2-69
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
E8A9
E8B6
E8B9
E8BB
E8BD
E8BF
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EA00
EA01
2-70
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EA02
EA03
EA07
EA08
EA09
EA0A
EA12
EA13
EA15
EA18
EA19
EA1B
2-71
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EA1E
EA20
EA22
EA25
EA29
EA2C
EA33
EA36
EA3A
EA3B
2-72
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EA3C
EA40
EA41
EA46
EA4D
EA89
EA8A
EA95
EAA0
EAA2
2-73
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EAA3
EAA5
EAA6
EABC
EAD0
EAE5
EAE7
EAF6
2-74
Type of error
Error details
A UR copy pair status cannot be
changed because the specified journal
group number is invalid.
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
N
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EB08
EB09
EB0A
EB0F
EB24
EB25
EB28
EB2D
EB30
EB37
2-75
Type of error
Error
code
EB38
Error details
When making a copy pair using the
same journal group number and mirror
ID as an existing copy pair, you cannot
specify a secondary storage system
that differs from the secondary storage
system of the existing copy pair.
Therefore, a UR copy pair cannot be
made.
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EB3C
EB3D
EB48
EB49
EB4C
EB4D
2-76
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EB4F
EB50
EB51
EB52
EB53
EB56
EB5B
EB5D
EB5E
EB5F
EB60
EB61
EB62
2-77
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EB63
EB64
EB6B
EB6E
EB6F
EB70
EB73
EB74
EB78
EB79
EB7A
EB7D
2-78
Type of error
Error
code
EB7E
Error details
A UR copy pair cannot be made. The
reason might be one of the following:
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EB7F
EB87
EB88
EB89
EB8A
2-79
Type of error
Error
code
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EBA0
EBA7
EBA8
EBB3
EBBD
EBC6
EBCE
EBD0
EBD3
2-80
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EBDA
EBDB
EBE0
EBE1
EBE2
EBEB
2-81
Error
code
Type of error
Error details
SI
TC
TCA
UR
CMD
PAT
H
HDT Othe
z
r
EBF2
EBF3
EBFD
2-82
A
AP
application program
APF
authorized program facility
ASCII
american standard code for information interchange
B
Business Continuity Manager
Hitachi Business Continuity Manager
C
CCA
command control address
CCW
channel command word
CLI
command line interface
W X
Acronyms-1
Hitachi Tiered Storage Manager for Mainframe Messages
CSB
channel status byte
CSV
comma-separated values
CU
control unit
D
DASD
direct access storage device
DEVN
device number
DFSMS
Data Facility Storage Management Subsystem
DKC
disk controller
DLIB
distribution library
DSB
device status byte
DSORG
data set organization
Dynamic Provisioning for Mainframe
Hitachi Dynamic Provisioning Software for Mainframe
Dynamic Tiering for Mainframe
Hitachi Dynamic Tiering Software for Mainframe
E
EBCDIC
extended binary coded decimal interchange code
Acronyms-2
Hitachi Tiered Storage Manager for Mainframe Messages
W X
F
FTP
file transfer protocol
G
GTF
generalized trace facility
H
HDPz
Hitachi Dynamic Provisioning Software for Mainframe
HDTz
Hitachi Dynamic Tiering Software for Mainframe
I
IPL
initial program load
ISPF
interactive system productivity facility
J
JCL
job control language
L
LDEV
logical device
LRECL
logical record length
W X
Acronyms-3
Hitachi Tiered Storage Manager for Mainframe Messages
M
MIH
missing interrupt handler
O
OPEX
operating expense
OS
operating system
R
RACF
resource access control facility
RAID
redundant array of independent disks
RECFM
record format
REXX
restructured extended executor
ROI
return on investment
S
S-VOL
secondary volume
SAF
system authorization facility
SAS
serial attached SCSI
Acronyms-4
Hitachi Tiered Storage Manager for Mainframe Messages
W X
SATA
serial advanced technology attachment
SCP
state change pending
SCSI
small computer system interface
SLA
service level agreement
SMP/E
system modification program extended
SMS
Storage Management Subsystem
SSD
solid state drive
SSID
storage system ID
SVP
service processor
SYSMOD
SYStem MODification
T
Tiered Storage Manager for Mainframe
Hitachi Tiered Storage Manager for Mainframe
TSO/E
Time Sharing Option/Extensions
V
VM
virtual machine
W X
Acronyms-5
Hitachi Tiered Storage Manager for Mainframe Messages
VSP
Hitachi Virtual Storage Platform
X
XML
extensible markup language
XRC
extended remote copy
Acronyms-6
Hitachi Tiered Storage Manager for Mainframe Messages
W X
Index
D
Details of error codes
2-2
I
Identifying the volume to be processed
1-209
M
Message format 1-2
Message output destination 1-4
Message output format 1-2
Messages starting with KT 1-4
Messages starting with YK 1-44
Multi-line messages output to SYSTSPRT starting
from YK 1-204
N
Notations used to describe messages
1-3
U
User completion codes
1-209
Index-1
Hitachi Tiered Storage Manager for Mainframe Messages
Index-2
Hitachi Tiered Storage Manager for Mainframe Messages
MK-92HC210-01