Professional Documents
Culture Documents
EMCP 4.2 Generator Controller
EMCP 4.2 Generator Controller
EMCP 4.2
GENERATOR SET
CONTROLLER
Caterpillar is leading the power generation market
place with power solutions engineered to deliver
unmatched performance, reliability, durability and
cost-effectiveness.
FEATURES
GENERAL DESCRIPTION
FEATURES
A 33 x 132 pixel, 3.8 inch, graphical display denotes
text alarm/event descriptions, set points, engine and
generator monitoring, and is visible in all lighting
conditions.
Textual display with support for 28 languages,
including character languages such as Arabic,
Chinese, and Japanese.
Advanced engine monitoring is available on systems
with an electronic engine control module.
Integration with the Cat Digital Voltage Regulator
(CDVR) provides enhanced system performance.
Fully featured power metering, protective relaying,
engine and generator parameter viewing, and
expanded AC metering are all integrated into this
controller.
LEHE0138-00
STANDARDS
UL Recognized
CSA C22.2 No.100,14, 94
Complies with all necessary standards for
CE Certification
98/37/EC Machinery Directive
BS EN 60204-1 Safety of Machinery
89/336/EEC EMC Directive
BS EN 50081-1 Emissions Standard
BS EN 50082-2 Immunity Standard
73/23/EEC Low Voltage Directive
EN 50178 LVD Standard
IEC529, IEC60034-5, IEC61131-3
MIL STND 461
Generator Monitoring
Generator Protection
Engine Monitoring
Engine Protection
Control
Communications
Language Support
Environmental
LEHE0138-00
CAN ANNUNCIATOR
The EMCP 4 CAN Annunciator serves to display genset
system alarm conditions and status indications.
The annunciator has been designed for use on
the accessory communication network and may be used
in either local (package mounted) or remote (up to 800
feet) application. A maximum of three annunciators may
be used with a single EMCP 4.2.
RS-485 ANNUNCIATOR
The EMCP 4 RS-485 Annunciator serves to display
genset system alarm conditions and status indications.
The annunciator has been designed for use on
the long distance annunciator datalink and is used for
remote (up to 4000 feet) application.
LEHE0138-00
THERMOCOUPLE MODULE
The thermocouple module serves to provide
expandable engine and generator temperature
monitoring capability of the EMCP 4 and is
capable of reading up to twenty Type J or K
thermocouple inputs. The thermocouple
module has been designed for use on the
accessory communication Network and may be
used in either local (package mounted) or remote
(up to 800 feet) application. A maximum of one
thermocouple modules may be used with a single
EMCP 4.2 on each datalink.
Information contained in this publication may be considered confidential. Discretion is recommended when distributing.
Materials and specifications are subject to change without notice.
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow, the Power Edge trade dress as well as corporate
and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
www.Cat-ElectricPower.com
LEHE0138-00
LEHE0138-00 (03-10)
2010 Caterpillar
All Rights Reserved.
Printed in U.S.A