Professional Documents
Culture Documents
AIA Layer Standards
AIA Layer Standards
VERSION 3.1
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Table of Contents
INTRODUCTION
Overview.................................................................................. CLG-1
A Brief History of CAD Layer Guidelines ........................................ 1
New in Version 3.0 .......................................................................... 3
LAYER LIST
Drawing View Layer List ......................................................... CLG-9
Annotation Layer List.................................................................... 11
General Layer List ......................................................................... 13
Hazardous Materials Layer List .................................................... 15
Survey and Mapping Layer List..................................................... 17
Geotechnical Layer List ................................................................ 23
TABLE OF CONTENTS
CLG-i
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
CLG-ii
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
TABLE OF CONTENTS
CLG-iii
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Introduction
Overview
Virtually all vector-based CAD systems support the concept of layers. This function allows
building design information to be organized in a systematic fashion, facilitates the visual display
of the information on a computer screen, and allows the information to be efficiently converted to
the conventional print media of drawings. Efficient use of layers can reduce document
preparation time and improve document coordination. Organizing data by layers allows a single
CAD file to contain a wealth of information about a building or facility. By turning selected
layers on or off, data can be created, reviewed and edited according to a hierarchy that simulates
the physical organization of building systems, the relative position of building elements, or the
sequence of construction.
CLG-1
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
constituent publishers, as they came to be known, were joined by a number of building design and
construction industry organizations in developing and publishing the U.S. NCS.
In March 1999, the U.S. National CAD Standard Project Committee formally accepted CAD
Layer Guidelines, Second Edition (with minor amendments) as a constituent document of the U.S.
National CAD Standard, Version 1.0, published in July 1999. The U.S. NCS Project Committee
immediately set to work on publication of Version 2.0, which was published in 2002.
Considerable confusion resulted from the lack of alignment between the Second Edition of
CAD Layer Guidelines and Version 1.0 of the U.S. National CAD Standard. Because CAD
Layer Guidelines, Second Edition was published before, and later incorporated into, the U.S.
National CAD Standard, Version 1.0, this could not be avoided. With publication of the U.S.
National CAD Standard, Version 2.0, this problem was corrected by giving the constituent
document an entirely new name. For the first time, AIA became part of the title of the
publication, and the numbered editions were abandoned. As a result, this publication is known
as AIA CAD Layer Guidelines: U.S. NCS Version 2.0. No doubt some confusion will still arise
between the U.S. NCS Version 2.0 and the old CAD Layer Guidelines, Second Edition, but the
problem should be resolved with the publication of the new U.S. NCS, Version 3.0.
Version 2
AIA CAD Layer Guidelines, version 2, was designed and formatted to match its companion
document, CSI's Uniform Drawing System. It was also carefully coordinated with that document,
so that the two function as a whole.
Additions and improvements to version 2 of AIA CAD Layer Guidelines:
An expanded Drawing View Layer List for users with a need to organize data by
drawing type rather than by building system.
INTRODUCTION
CLG-2
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
New Annotation Minor Groups, and a new free agent rule permitting Annotation
Minor Groups to modify any Major Group.
Clarification of the existing free agent rule, emphasizing that any reasonable
combination of Discipline Designator, Major Group and Minor Group is permitted.
New rules and a detailed Commentary to facilitate conformance with the ISO CAD
Standard.
New in Version 3
Highlights of revisions and additions to Version 3 include the following:
User-defined Minor Group field codes may now be four alphabetic and/or numeric
characters (09) and/or ~.
Additions to the Process Layer List allow users to define layers by individual systems or
groups of systems.
New Major and Minor Groups added to the Equipment, Mechanical, and Interior Layer
Lists.
INTRODUCTION
CLG-3
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
A I
- W A L L -
F U L L - D I M S - N
CLG-4
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
A - W A L L
The Discipline Designator denotes the category of subject matter contained on the specified layer.
The Discipline Designator is a two-character field. The first character is the discipline character,
and the second character is an optional modifier. The Discipline Designator is described in greater
detail on page UDS-01.14. For a complete list of Discipline Designators, see Appendix A of UDS
Module 1 beginning on page UDS-01.35.
General
Hazardous Materials
Survey / Mapping
Geotechnical
Civil Works
Civil
Landscape
Structural
Architectural
Interiors
Equipment
Fire Protection
Plumbing
Process
Mechanical
Electrical
Telecommunications
Resource
Other Disciplines
Operations
CLG-5
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Designator
Description
Architectural
AS
Architectural Site
AD
Architectural Demolition
AE
Architectural Elements
AI
Architectural Interiors
A D - WA L L
AF
Architectural Finishes
AG
Architectural Graphics
AJ
User-Defined
AK
User-Defined
New
For a complete list of Discipline Designators, see Appendix A of UDS Module 1 beginning on
page UDS-01.35.
CLG-6
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Major Group
A typical layer name showing the
required data fields only.
The mandatory Major Group
field is highlighted:
A - WA L L
The Major Group is a four-character field that identifies a major building system. The prescribed
Major Group field codes (four-character abbreviations) shown on the Layer List are logically
grouped with specific discipline designators. However, any Major Group may be combined with
any prescribed Discipline Designator, provided that the definition of the Major Group remains
unchanged. Therefore, any reasonable combination of the prescribed Discipline Designators and
Major Groups is permitted.
NOTE: User-defined Major Group field codes are not permitted.
A - WA L L - F U L L
A typical layer name showing two
optional Minor Group fields:
A - WA L L - F U L L - T E X T
NOTE: For conceptual conformance to ISO 13567, Organization and Naming of Layers for CAD,
the use of the Major Group ANNO is not permitted. See Commentary: U.S. NCS and ISO
13567 (p. 91) at the end of AIA CAD Layer Guidelines for detailed information about ISO
conformance.
Minor Group
This is an optional, four-character field to further define the Major Groups. For example, AWALL-FULL denotes Architectural, Wall, Full-height. A second minor group may be used for still
further delineation of the data contained on a layer. For example, A-WALL-FULL-TEXT indicates
Architectural, Wall, Full-height, Text.
The prescribed Minor Group field codes (four-character abbreviations) shown on the Layer List
are logically grouped with specific Major Groups. However, any Minor Group may be used to
modify any Major Group, provided that the definition of the Minor Group remains unchanged.
Therefore, any reasonable combination of the prescribed Major and Minor Groups is permitted.
NOTE: User-defined Minor Group field codes are permitted. They must contain four alphabetic
and/or numeric characters and/or ~, and must be fully documented on the U.S. NCS
Compliance Disclosure Statement for the project on which they are used.
NOTE: For conceptual conformance to ISO 13567, Organization and Naming of Layers for
CAD, the use of certain Minor Group field codes is restricted. See Commentary: U.S. NCS and
ISO 13567 (p. 91) at the end of AIA CAD Layer Guidelines for detailed information about ISO
conformance.
LAYER NAME FORMAT
CLG-7
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Status (Phase)
A typical layer name showing the
location of the optional Status field:
A - WA L L - F U L L - T E X T - N
The status field is an optional single-character field that distinguishes the data contained on the
layer according to the status of the work or the construction phase. The prescribed field codes for
this field are as follows:
New work
Existing to remain
Existing to demolish
Future work
Temporary work
Items to be moved
Not in contract
1-9
Phase numbers
Note that for conceptual conformance to ISO 13567, Organization and Naming of Layers for
CAD, this field may be used to denote either Status OR Phase, but not BOTH. See
Commentary: U.S. NCS and ISO 13567 (p. 91) at the end of AIA CAD Layer Guidelines for
detailed information about ISO conformance.
CLG-8
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Drawing View field codes are specialized codes for layers that are
organized primarily by drawing type, rather than by major building
system. The field codes DETL, ELEV, and SECT may also be used as
Minor Group field codes to modify a major building system.
Layer Name
Description
New
-DETL
-ELEV
-SECT
-ANNN
Detail
Elevation
Section
Drawing View Major Group: optional
number (A = letter, NNN = number
between 001 and 999)
-ANNN-MCUT Drawing View Major Group: optional
number: material cut by the view
-ANNN-MBND Drawing View Major Group: optional
number: material beyond cut
-ANNN-PATT Drawing View Major Group: optional
number: textures and hatch patterns
-ANNN-IDEN
Drawing View Major Group: optional
number: component identification
numbers
-ANNN-OTLN Drawing View Major Group: optional
number: outline of object drawn
CLG-9
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Minor
Group field codes for annotation. These Minor Groups may be used to
modify any Major or Minor Group in the Layer List. See page CLG8 for complete rules and options governing the use of Major and Minor
Group field codes.
-ANNO
-BRNG
-
-DIMS
-IDEN
-KEYN
-LABL
-LEGN
-MARK
-MATC
-NOTE
-NPLT
Description
Annotation
Bearings and distance labels (survey
coordinates)
Dimensions
Identification tags
Keynotes
Labels
Legends, symbol keys
Markers, break marks, leaders
Match lines
Notes
Non-plotting graphic information
New
Layer Name
-RDME
-REDL
-REFR
-REVC
-REVS
-SCHD
-SYMB
-TEXT
-TABL
-TITL
-TTLB
Description
New
CLG-11
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
General
GI
General Informational
GC
General Contractual
GR
General Resource
GJ
User-Defined
GK
User-Defined
New
Description
G -ACCS
G -CODE
G -EVAC
Access plan
Code compliance plan
Evacuation plan
G -FIRE
G -PLAN
G -SITE
New
CLG-13
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Hazardous Materials
HA
Asbestos
HC
Chemicals
HL
Lead
HP
PCB
HR
Refrigerants
HJ
User-Defined
HK
User-Defined
New
Description
H -PLAN
H -SITE
New
CLG-15
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Survey / Mapping
VA
Aerial Survey
VF
Field Survey
VI
Digital Survey
VJ
User-Defined
VK
User-Defined
Layer Name
Description
V -BLDG-PRCH
V -BNDY
V -BNDY-BORO
V -BNDY-CITY
V -BNDY-CNTY
V -BNDY-CORP
V -BNDY-NATL
New
Description
V -BLDG
V -BLDG-DECK
V -BLDG-OTLN
V -BLDG-OVHD
New
New
CLG-17
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Layer Name
Description
Survey/Mapping (continued)
Survey/Mapping (continued)
V -BNDY-POLI
V -BNDY-PROV
V -COMM
V -COMM-MHOL
Communications
Communications: manhole
V -BNDY-STAT
V -COMM-OVHD
V -BNDY-TSHP
V -BNDY-ZONE
V -COMM-POLE
V -COMM-UNDR
V -BRDG
Bridge
V -CTRL
Control points
V -BRDG-BENT
V -BRDG-CNTR
V -CTRL-BMRK
V -CTRL-FLYS
V -BRDG-CTLJ
V -CTRL-GRID
V -BRDG-DECK
V -BRDG-RAIL
V -CTRL-HCPT
V -CTRL-HVPT
V -BRKL
V -CTRL-PNPT
V -BRKL-BOTB
V -BRKL-FLOW
V -CTRL-TRAV
V -CTRL-VCPT
V -DRIV
Driveways
V -BRKL-TOPB
V -BRLN
V -DRIV-ASPH
V -DRIV-CNTR
V -BZNA
V -CHAN
V -DRIV-CONC
V -CHAN-BWTR
V -DRIV-CURB
V -DRIV-FLNE
Driveways: curb
Driveways: fire lane
V -CHAN-CNTR
V -DRIV-GRVL
V -DRIV-MRKG
V -DRIV-UPVD
V -DTCH
Ditches or washes
V -DTCH-BOTD
V -DTCH-CNTR
V -DTCH-EWAT
V -CHAN-DACL
V -CHAN-DOCK
V -CHAN-NAID
New
CLG-18
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Layer Name
Description
Survey/Mapping (continued)
Survey/Mapping (continued)
V -DTCH-TOPD
V -ESMT
V -FUEL
V -FUEL-MHOL
Fuel gas
Fuel gas: manhole
V -ESMT-ACCS
V -FUEL-PIPE
V -ESMT-CATV
V -FUEL-TANK
V -FUEL-UNDR
V -ESMT-CONS
V -ESMT-CSTG
Easements: conservation
Easements: construction / grading
V -NGAS
Natural gas
V -ESMT-ELEC
Easements: electrical
V -NGAS-MHOL
V -NGAS-PIPE
V -ESMT-FDPL
V -ESMT-INEG
V -ESMT-LSCP
V -ESMT-NGAS
V -ESMT-PHON
V -ESMT-ROAD
V -ESMT-STRM
V -ESMT-SWMT
V -NGAS-UNDR
V -NGAS-TANK
V -NODE
V -NODE-DASP
V -NODE-EASP
V -NODE-PASP
V -NODE-ABUT
Node: abutment
V -NODE-ACTL
V -NODE-BLIN
V -NODE-BLDG
Node: baseline
Node: building points
V -NODE-BRDG
V -ESMT-TRAL
V -NODE-BRKL
V -ESMT-UTIL
V -ESMT-WATR
Easements: utilities
Easements: water supply
V -NODE-BROW
V -FLHA
V -NODE-BRSH
New
CLG-19
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Layer Name
Description
Survey/Mapping (continued)
Survey/Mapping (continued)
V -NODE-CABL
V -NODE-CNTL
V -POWR
V -POWR-FENC
Power
Power: fence enclosure
V -POWR-INST
V -NODE-DECK
V -POWR-MHOL
Power: manholes
V -NODE-DRIV
V -NODE-EXPJ
V -POWR-OVHD
V -POWR-POLE
V -NODE-GRND
V -POWR-STRC
Power: structures
V -NODE-MRKG
V -POWR-UNDR
V -PRKG
V -NODE-MHOL
V -PRKG-ASPH
V -NODE-NGAS
V -PRKG-CNTR
V -PRKG-CONC
V -NODE-PIPE
V -PRKG-CURB
V -PKNG-DRAN
V -PRKG-FLNE
V -PRKG-GRVL
V -PRKG-MRKG
V -NODE-CURB
V -NODE-POLE
V -NODE-PVMT
V -NODE-SIGN
V -NODE-SSWR
V -PRKG-STRP
V -PRKG-UPVD
V -NODE-STRM
V -PROP
Property boundary
V -PROP-LINE
V -NODE-SWLK
V -NODE-TREE
V -NODE-TROW
V -PROP-QTRS
V -PROP-RSRV
V -NODE-WATR
V -PROP-SBCK
New
CLG-20
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Layer Name
Description
Survey/Mapping (continued)
Survey/Mapping (continued)
V -PROP-SECT
V -PROP-SUBD
V -ROAD-GRVL
V -PROP-SXTS
V -PVMT
V -ROAD-UPVD
V -PVMT-ASPH
V -PVMT-CONC
V -PVMT-GRVL
V -RRAP
V -RWAY
Riprap
Right-of-way
V -RAIL
V -RAIL-CNTR
Railroad
Railroad: centerline
V -RWAY-CTLA
V -RAIL-EQPM
V -RWAY-CNTR
V -RWAY-LINE
Right-of-way: centerline
Right-of-way: lines
V -RWAY-LMTA
V -RAIL-TRAK
Railroad: track
V -RIVR
V -RIVR-BOTM
River
River: bottom
V -RWAY-MRKR
V -RWAY-STAN
Right-of-way: marker
Right-of-way: stationing
V -SITE
Site features
V -SITE-EWAT
V -SITE-FENC
V -SITE-ROCK
V -SITE-RTWL
V -SITE-SIGN
V -SITE-VEGE
V -ROAD-MRKG
V -RIVR-CNTR
River: centerline
V -RIVR-EDGE
V -RIVR-TOPB
River: edge
River: top of bank
V -ROAD
V -ROAD-ASPH
V -ROAD-CNTR
V -ROAD-CONC
V -SSWR
V -SSWR-MHOL
V -SSWR-PIPE
V -ROAD-CURB
V -ROAD-FLNE
New
CLG-21
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Layer Name
Description
Survey/Mapping (continued)
Survey/Mapping (continued)
V -SSWR-STRC
V -SSWR-UNDR
V -TOPO
V -TOPO-BORE
Topography
Topography: test borings
V -TOPO-EWAT
V -TOPO-GRID
V -TOPO-MAJR
V -STEM
V -STEM-INST
V -STEM-MHOL
V -TOPO-MINR
V -STEM-PIPE
V -STEM-STRC
V -TOPO-SPOT
V -STEM-UNDR
V -TOPO-SOUN
Topography: soundings
V -STRM
V -STRM-DTCH
V -UNID
V -UNID-CABL
V -UNID-PIPE
V -UNID-TANK
V -UNID-UTIL
V -UNID-UTIL-OVHD
V -UNID-UTIL-UNDR
V -WATR
V -WATR-INST
V -SURV-DATA
Survey: data
V -WATR-MHOL
Water supply
Water supply: instrumentation
(meters, valves, pumps)
Water supply: manhole
V -SURV-LINE
V -SWLK
V -WATR-PIPE
V -SWLK-ASPH
Sidewalks: asphalt
V -WATR-STRC
V -WATR-UNDR
V -SWLK-CONC
Sidewalks: concrete
V -STRM-MHOL
V -STRM-PIPE
V -STRM-POND
V -STRM-STRC
V -STRM-UNDR
V -SURV
New
CLG-22
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Geotechnical
BJ
User-Defined
BK
User-Defined
Layer Name
Description
B -DETL-ANNN-FILL
B -DETL-ANNN-FDTA
B -DETL-ANNN-GENF
New
Description
B -BORE
Borings
B -BORE-FDTA
B -BORE-HOLE
B -BORE-LDTA
B -DETL-ANNN
B -DETL-ANNN-BORE
B -DETL-ANNN-CONC
B -DETL-ANNN-ERTH
New
New
B -DETL-ANNN-PVMT
CLG-23
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Geotechnical (continued)
B -DETL-ANNN-SPCL
B -DETL-ANNN-STRM
B -DETL-ANNN-SUBS
B -DETL-ANNN-SURF
CLG-24
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
The Civil Works discipline is defined as large-scale projects that usually
cross property boundaries, such as highways, tunnels, dams, utility
distribution systems, water supply systems, and sewer systems. The
selection of the Civil or Civil Works Discipline Designator is at the
discretion of the user, but should generally be used to distinguish projects
in terms of scale.
Designator
Description
Civil Works
WJ
User-Defined
WK
User-Defined
New
Description
New
CLG-25
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
The Civil Discipline is defined as a project or a portion of a project that
is usually contained within a single property boundary. The selection of
the Civil or Civil Works Discipline Designator is at the discretion of the
user, but should generally be used to distinguish projects in terms of
scale.
Designator
Description
Civil
CD
Civil Demolition
CS
Civil Site
CG
Civil Grading
CP
Civil Paving
CI
Civil Improvements
CT
Civil Transportation
CU
Civil Utilities
CJ
User-Defined
CK
User-Defined
Layer Name
Description
C -AFLD-FLNE
C -AFLD-FLNE-MRKG
New
Description
C -AFLD
C -AFLD-ASPH
Airfields
Airfields: asphalt surface
C -AFLD-CNTR
Airfields: centerline
C -AFLD-CONC
New
C -AFLD-FLNE-SIGN
New
CLG-27
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Civil (continued)
New
Layer Name
Description
Civil (continued)
C -AFLD-GRVL
C -AFLD-MRKG
C -BRDG-HIDD
C -AFLD-SIGN
Airfields: signs
C -AFLD-STAN
C -AFLD-WHIT
Airfields: stationing
Airfields: white paint
C -BRDG-OBJT
C -BRDG-OBJT-PRIM
C -BRDG-OBJT-SECD
C -BRDG-RBAR
C -CATV
C -CATV-OVHD
C -CATV-POLE
C -CATV-UNDR
C -CEME
Cemetery
C -CHAN
C -CHAN-DACL
Navigable channels
Navigable channels: de-authorized
channel limits, anchorages, etc.
Navigable channels: channel
centerline and survey report lines
Navigable channels: navigation aids
C -AFLD-WHIT-TICK
C -AFLD-YELO
C -AFLD-YELO-TICK
C -BLDG
C -BLDG-DECK
C -BLDG-OTLN
C -BLDG-OVHD
C -CHAN-CNTR
C -BLDG-PRCH
C -CHAN-NAID
C -BLIN
Baseline
C -BLIN-STAN
C -BORE
Baseline: stationing
Test borings
C -BRDG
C -CHAN-DOCK
C -CHAN-BWTR
Bridge
C -COMM
C -COMM-OVHD
Communications
Communications: overhead lines
C -BRDG-FALT
C -BRDG-CNTJ
C -COMM-POLE
C -BRDG-CNTR
Bridge: centerline
C -COMM-UNDR
C -CTRL
C -BRDG-DECK
C -BRDG-EXPJ
Bridge: deck
Bridge: expansion joint
C -CTRL-BMRK
C -CTRL-FLYS
C -CTRL-GRID
New
CLG-28
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Civil (continued)
New
Layer Name
Description
Civil (continued)
C -CTRL-HCPT
C -CTRL-HVPT
C -DTCH
C -DTCH-BOTD
Ditches or washes
Ditches or washes: bottom
C -CTRL-PNPT
C -DTCH-CNTR
C -CTRL-TRAV
C -CTRL-VCPT
C -DTCH-EWAT
C -DTCH-TOPD
C -DFLD
Drain fields
C -EROS
C -DFLD-OTLN
C -DFLD-PROF
C -EROS-CIPR
C -DRIV
Driveways
C -EROS-CNTE
C -DRIV-ASPH
C -DRIV-CNTR
C -EROS-DDIV
C -DRIV-CONC
C -EROS-DVDK
C -DRIV-CURB
C -DRIV-CURB-FACE
Driveways: curb
Driveways: curb: face
C -EROS-INPR
C -DRIV-CURB-BACK
C -DRIV-FLNE
C -DRIV-FLNE-MRKG
C -EROS-SILT
C -EROS-SSLT
C -DRIV-FLNE-SIGN
C -DRIV-GRVL
C -DRIV-MRKG
C -DRIV-SIGN
C -ESMT
C -ESMT-ACCS
C -ESMT-CATV
Easements
Easements: access (pedestrian only;
private access)
Easements: utility - cable television
C -DRIV-UPVD
C -ESMT-CONS
Easements: conservation
C -DRIV-WHIT
C -DRIV-WHIT-TICK
C -ESMT-CSTG
C -ESMT-ELEC
C -DRIV-YELO
C -ESMT-FDPL
C -DRIV-YELO-TICK
New
CLG-29
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Civil (continued)
C -ESMT-INEG
C -ESMT-LSCP
New
Layer Name
Description
Civil (continued)
Easements: ingress / egress
(vehicles; private access)
Easements: landscape
C -ESMT-NGAS
C -ESMT-PHON
C -ESMT-ROAD
C -FIRE-UNDR
C -FLHA
C -FLHA-025Y
C -FLHA-050Y
C -FLHA-100Y
C -FLHA-200Y
C -FUEL
Fuel gas
C -FUEL-EQPM
C -FUEL-INST
C -ESMT-SSWR
C -FUEL-MHOL
C -ESMT-STRM
C -ESMT-SWMT
C -FUEL-PIPE
C -ESMT-TRAL
C -FUEL-TANK
C -FUEL-UNDR
C -LOCN
Limits of construction
C -ESMT-UTIL
Easements: utilities
C -ESMT-WATR
C -FENC
C -NGAS
C -NGAS-EQPM
C -FENC-GRAL
C -FENC-POST
C -FENC-STEL
C -FENC-WOOD
Fences: posts
Fences: steel (barbed wire and/or
chain link)
Fences: wood
Natural gas
Natural gas: equipment (pumps,
motors)
Natural gas: instrumentation (meters,
valves, etc.)
Natural gas: manhole
C -FIRE
C -FIRE-HYDR
C -FIRE-PIPE
New
C -NGAS-INST
C -NGAS-MHOL
C -NGAS-PIPE
C -NGAS-TANK
C -NGAS-UNDR
C -PERC
Perc testing
C -PERC-HOLE
C -PRKG
CLG-30
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Civil (continued)
New
Layer Name
Description
Civil (continued)
C -PRKG-ASPH
C -PRKG-CARS
C -POND-SWAY
C -POWR-FENC
Ponds: spillway
Power: enclosure fence
C -PRKG-CONC
C -POWR-INST
C -PRKG-CURB
C -PRKG-CURB-FACE
C -POWR-MHOL
Power: manhole
C -POWR-OVHD
C -POWR-POLE
C -POWR-STRC
Power: structures
C -POWR-UNDR
C -PROP
C -PROP-LINE
C -PROP-SBCK
C -PRKG-DRAN
C -PRKG-FIXT
C -PRKG-FLNE
Parking lots: fire lane
C -PRKG-FLNE-MRKG Parking lots: fire lane: pavement
markings
C -PRKG-FLNE-SIGN
Parking lots: fire lane: signage
C -PRKG-GRVL
C -PVMT
C -PVMT-ASPH
Pavement
Pavement: asphalt surface
C -PRKG-MRKG
C -PRKG-SIGN
C -PVMT-CONC
C -PRKG-STRP
C -PVMT-GRVL
C -RAIL
C -PRKG-UPVD
C -PRKG-WHIT
C -RAIL-CNTR
Railroad: centerline
C -RAIL-EQPM
C -PRKG-WHIT-TICK
C -PRKG-YELO
C -PRKG-YELO-TICK
C -RAIL-TRAK
C -RIVR
Railroad: track
River
C -POND
Ponds
C -RIVR-BOTM
River: bottom
C -POND-EDGE
C -POND-TOPB
Ponds: edge
Ponds: top of bank
C -RIVR-CNTR
C -RIVR-EDGE
River: centerline
River: edge
C -POWR
Power
C -RIVR-TOPB
New
CLG-31
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Civil (continued)
New
Layer Name
Description
Civil (continued)
C -ROAD
C -ROAD-ASPH
Roadways
Roadways: asphalt surface
C -SSWR
C -SSWR-LATL
Sanitary sewer
Sanitary sewer: lateral line
C -ROAD-CNTR
Roadways: centerline
C -SSWR-MHOL
C -ROAD-CONC
C -ROAD-CURB
C -SSWR-PIPE
C -SSWR-PIPE-RCON
C -SSWR-PIPE-STEL
C -SSWR-PROF
C -SSWR-STAN
C -SSWR-STRC
C -ROAD-FLNE-SIGN
C -SSWR-UNDR
C -ROAD-GRVL
C -ROAD-MRKG
C -STEM
C -STEM-INST
C -ROAD-PROF
Roadways: profile
C -ROAD-SIGN
C -ROAD-STAN
Roadways: signs
Roadways: stationing
C -STEM-MHOL
Steam system
Steam system: instrumentation
(meters, valves, etc.)
Steam system: manhole
C -STEM-PIPE
C -ROAD-UPVD
C -ROAD-WHIT
C -ROAD-WHIT-TICK
C -STEM-STRC
C -STEM-UNDR
C -STRM
Storm sewer
C -ROAD-YELO
C -ROAD-YELO-TICK
C -RRAP
C -STRM-CNTR
C -STRM-DIAG
C -SGHT
Sight distance
C -SGHT-PROF
C -SOIL
C -SSWR-DIAG
C -SSWR-FORC
New
C -STRM-HWAL
C -STRM-MHOL
C -STRM-PIPE
C -STRM-PIPE-RCON
CLG-32
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Civil (continued)
New
Layer Name
Description
Civil (continued)
C -STRM-PIPE-CMTL
C -STRM-PROF
C -TRAL-CONC
C -TRAL-SIGN
C -STRM-STAN
C -TRAL-UPVD
C -STRM-STRC
C -STRM-UNDR
C -WALL
C -WALL-SHEA
C -SWLK
Sidewalks
C -SWLK-ASPH
C -SWLK-CONC
Sidewalks: asphalt
Sidewalks: concrete
C -WALL-CTLJ
Walls
Walls: structural bearing or shear
walls
Walls: control joints
C -WALL-NSBR
C -TINN
C -TINN-BNDY
C -WALL-RTWL
C -WATR
Walls: retaining
Water supply systems
C -WATR-DIAG
C -TINN-FALT
C -WATR-INST
C -TINN-VIEW
C -WATR-PIPE
C -WATR-PROF
C -TINN-VOID
C -WATR-STAN
C -TOPO
C -TOPO-BORE
Topography
Topography: test borings
C -WATR-STRC
C -WATR-UNDR
C -TOPO-DEPR
C -WATR-WELL
C -TOPO-MAJR
C -TOPO-MINR
C -WETL
Wetlands
C -TOPO-SPOT
C -TOPO-TPIT
C -TRAL
C -TRAL-ASPH
C -TRAL-GRVL
C -TRAL-MRKG
New
CLG-33
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Landscape
LD
Landscape Demolition
LI
Landscape Irrigation
LP
Landscape Planting
LJ
User-Defined
LK
User-Defined
Layer Name
Description
New
Description
L -ANNO
L -ANNO-ALIN
L -ANNO-ALIN-INFO
L -ANNO-CURV-LABL
Annotation
Annotation: alignment stationing
Annotation: alignment stationing:
labels
Annotation: alignment stationing:
information
Annotation: curve: labels
L -ANNO-CURV-TABLBRDR
Annotation: curve: tables: border
L -ANNO-CURV-TABLHEDR
Annotation: curve: tables: header
L -ANNO-CURV-TABLTEXT
Annotation: curve: tables: text
L -ANNO-LINE-LABL
Annotation: line: labels
L -ANNO-CURV-TABL
L -ANNO-LINE-TABL
L -ANNO-ALIN-LABL
New
New
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Landscape (continued)
L -ANNO-LINE-TABLBRDR
L -ANNO-LINE-TABLHEDR
L -ANNO-LINE-TABLTEXT
New
Layer Name
Description
Landscape (continued)
L -PLNT-EVGR
Annotation: line: tables: border
L -PLNT-GRND
Annotation: line: tables: header
L -PLNT-PALM
L -IRRG
L -IRRG-COVR
L -PLNT-REMN
L -IRRG-DRIP
L -PLNT-REMV
L -IRRG-EQPM
L -PLNT-SEED
L -IRRG-LTRL
L -IRRG-MAIN
L -PLNT-SHAD
L -IRRG-PIPE
Irrigation: piping
L -PLNT-SHRB
L -IRRG-SLVE
L -IRRG-SPKL
L -IRRG-VALV
Irrigation: valves*
L -PLNT-TREE
L -PLNT-TURF
L -PLNT
L -PLNT-BEDS
L -PLNT-VINE
L -SITE
Site improvements
L -SITE-BRDG
L -SITE-CURB
L -SITE-CURB-BACK
L -PLNT-BUSH
L -PLNT-CONI
L -PLNT-CTNR
L -PLNT-EDGR
New
L -PLNT-PLTS
CLG-36
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Landscape (continued)
L -SITE-CURB-FACE
New
Layer Name
Description
Landscape (continued)
Site improvements: curbs: face of
curb
Site improvements: raised decks
(wood, typ.)
L -SITE-PVMT-ASPH
L -SITE-FENC
L -SITE-FENC-LINK
L -SITE-PVMT-CONC
L -SITE-FENC-LINK04FT
L -SITE-PVMT-CONCAGGR
L -SITE-FENC-LINK06FT
L -SITE-PVMT-GRAV
L -SITE-FENC-PRVC
L -SITE-PVMT-JNTC
L -SITE-FENC-WOOD
L -SITE-PVMT-JNTE
L -SITE-FURN
L -SITE-PKNG
L -SITE-PVMT-PAVR
L -SITE-PKNG-STRP
L -SITE-PVMT-RAMP
L -SITE-PLAY
L -SITE-PVMT-STEP
L -SITE-PLAY-EQPM
L -SITE-PLAY-ZONE
L -SITE-ROAD
L -SITE-RPRP
L -SITE-POOL
L -SITE-POOL-BACK
L -SITE-SPRT
L -SITE-SPRT-EQPM
L -SITE-SPRT-PRIM
L -SITE-STEP
L -SITE-RTWL
L -SITE-TRAL
L -SITE-DECK
L -SITE-POOL-FACE
L -SITE-PVMT
New
L -SITE-PVMT-BRCK
CLG-37
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Landscape (continued)
L -SITE-TRAL-ASPH
L -SITE-TRAL-CONC
L -SITE-TRAL-GRVL
L -SITE WALK
L -SITE WALL
L -SITE WEIR
L -TOPO
Proposed grading
L -TOPO-DEPR
L -TOPO-INDX
L -TOPO-INTR
L -TOPO-LIMI
L -TOPO-SPOT
CLG-38
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Structural
SD
Structural Demolition
SS
Structural Site
SB
Structural Substructure
SF
Structural Framing
SJ
User-Defined
SK
User-Defined
Layer Name
Description
New
Description
New
S -BEAM
S -BEAM-ALUM
Beams
Beams: aluminum
S -BRAC-ALUM-VERT
S -BRAC-STEL
S -BEAM-CONC
Beams: concrete
S -BRAC-STEL-HORZ
S -BEAM-STEL
S -BEAM-WOOD
Beams: steel
Beams: wood
S -BRAC-STEL-VERT
S -BRAC-WOOD
S -BRAC
Bracing
S -BRAC-ALUM
S -BRAC-ALUM-HORZ
Bracing: aluminum
Bracing: aluminum: horizontal
S -BRAC-WOOD-VERT
S -COLS
New
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Structural (continued)
New
Layer Name
Description
New
Structural (continued)
S -COLS-ALUM
S -COLS-CONC
Columns: aluminum
Columns: concrete
S -SLAB-CONC
S -SLAB-OPNG
S -COLS-STEL
Columns: steel
S -SLAB-OPNX
S -COLS-WOOD
S -DECK
Columns: wood
Structural deck
S -SLAB-EDGE
S -SLAB-STEL
S -DECK-FLOR
S -SLAB-WOOD
Slab: wood
S -DECK-FLOR-OPNG
S -DECK-ROOF
S -STRS
S -STRS-LADD
Stairs
Stairs: ladders & ladder assemblies
S -DECK-ROOF-OPNG
S -TRUS
Trusses
S -FNDN
S -FNDN-FTNG
Foundation
Foundation: footings
S -WALL
S -WALL-CMUW
Walls
Walls: concrete masonry unit
S -FNDN-GRBM
S -WALL-CONC
S -FNDN-PCAP
S -FNDN-PIER
S -WALL-MSNW
S -WALL-PCST
Walls: masonry
Walls: pre-cast concrete
S -FNDN-PILE
Foundation: piles
S -WALL-SHEA
S -FNDN-RBAR
S -GRID
Foundation: reinforcing
Column grid
S -WALL-STEL
S -WALL-WOOD
S -GRID-EXTR
S -
-ABLT
S -GRID-INTR
S -JNTS
S S -
-METL
-GRAT
S -JNTS-CNTJ
Joints: construction
S -
S -JNTS-CTLJ
S -JNTS-EXPJ
Joints: control
Joints: expansion
S S -
-RBAR
-RBAR-BOT1
S -JOIS
Joists
S -JOIS-BRGX
S -PROP
Joists: bridging
Property lines
S -
-RBAR-BOT2
S -SLAB
Slab
CLG-40
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Structural (continued)
S -
-RBAR-TOP1
S -
-RBAR-TOP2
CLG-41
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Architectural
AS
Architectural Site
AD
Architectural Demolition
AE
Architectural Elements
AI
Architectural Interiors
AF
Architectural Finishes
AG
Architectural Graphics
AJ
User-Defined
AK
User-Defined
Layer Name
Description
New
Description
A A -
-FNSH
-CASE
A -AREA
A -AREA-OCCP
Area
Area: occupant or employee names
A A -
-FIXT
-GRID
A -CLNG
A -CLNG-ACCS
Ceiling
Ceiling: access
A -
-SIGN
A -CLNG-OPEN
Ceiling: openings
New
New
CLG-43
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Layer Name
Description
New
Architectural (continued)
Architectural (continued)
A -CLNG-TEES
A -CLNG-SUSP
A -FLOR-WDWK
A -FURN
A -COLS
Columns
A -CONV
A -DOOR
Conveying systems
Doors
A -FURN-FILE
A -FURN-FIXD
A -FURN-FREE
Furnishings: freestanding
A -DOOR-FULL
A -DOOR-PRHT
A -EQPM
A -FURN-PLNT
A -FURN-PNLS
Furnishings: plants
Furnishings: system panels
A -FURN-SEAT
Furnishings: seating
Furnishings: system storage
components
A -EQPM-ACCS
Equipment: access
A -FURN-STOR
A -EQPM-FIXD
A -EQPM-MOVE
A -FURN-WKSF
A -EQPM-NICN
A -EQPM-OVHD
A -FLOR
Equipment: overhead
Floor
A -GLAZ
A -GLAZ-FULL
Glazing
Glazing: full-height
A -FLOR-CASE
Floor: casework
A -GLAZ-PRHT
Glazing: partial-height
A -FLOR-EVTR
A -FLOR-HRAL
A -GLAZ-SILL
A -HVAC
A -FLOR-LEVL
A -HVAC-SDFF
A -FLOR-OTLN
Floor: outline
A -HVAC-RDFF
A -LITE
A -FLOR-OVHD
A -FLOR-RAIS
A -ROOF
Roof
A -FLOR-RISR
A -ROOF-HRAL
A -ROOF-LEVL
Roof: handrails
Roof: level changes
A -FLOR-SIGN
A -FLOR-SPCL
A -ROOF-OTLN
Roof: outline
A -ROOF-RISR
A -ROOF-STRS
A -FLOR-STRS
Floor: signs
Floor: specialties (toilet room
accessories, display cases)
Floor: stair treads, escalators, ladders
A -WALL
Walls
A -FLOR-TPTN
A -WALL-CAVI
Walls: cavity
CLG-44
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Architectural (continued)
A -WALL-CNTR
A -WALL-FIRE
Walls: centerline
Walls: fire wall
A -WALL-FULL
A -WALL-HEAD
Walls: full-height
Walls: door and window headers
A -WALL-JAMB
A -WALL-MOVE
A -WALL-PRHT
A -WALL-PATT
CLG-45
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Interior
ID
Interior Demolition
IN
Interior Design
IF
Interior Furnishings
IG
Interior Graphics
IJ
User-Defined
IK
User-Defined
Layer Name
Description
New
Description
I I -
I -CLNG-ACCS
I -CLNG-OPEN
Ceiling: access
Ceiling: openings
I -SIGN
I -AREA
I -CLNG-SUSP
I -CLNG-TEES
I -AREA-OCCP
I -COLS
Columns
I -CASE
I -CLNG
Casework
Ceiling
I -DOOR
I -DOOR-FULL
Doors
Doors: full-height
-FIXT
-GRID
New
New
CLG-47
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Interiors (continued)
New
Layer Name
Description
Interiors (continued)
I -DOOR-PRHT
I -EQPM
I -FURN-PLNT
I -FURN-PNLS
Furnishings: plants
Furnishings: system panels
I -EQPM-ACCS
Equipment: access
I -FURN-SEAT
Furnishings: seating
I -EQPM-FIXD
I -EQPM-MOVE
I -FURN-STOR
I -EQPM-NICN
I -FURN-WKSF
I -EQPM-OVHD
I -EQPM-STOR
Equipment: overhead
Equipment: storage
I -FLOR
Floor
I -GLAZ
I -GLAZ-FULL
Glazing
Glazing: full-height
I -FLOR-EVTR
I -FLOR-FIXT
I -GLAZ-PRHT
Glazing: partial-height
I -FLOR-HRAL
I -GLAZ-SILL
I -HVAC
I -FLOR-LEVL
I -HVAC-SDFF
I -FLOR-OTLN
I -FLOR-OVHD
Floor: outline
Floor: overhead (objects above)
I -HVAC-RDFF
I -MILL
I -PRTN
Partitions
I -FLOR-RAIS
Floor: raised
I -FLOR-RISR
I -FLOR-SIGN
I -PRTN-FULL
I - PRTN-PRHT
Partitions: full-height
Partitions: partial-height
I - PRTN-MOVE
I -FLOR-STRS
I -FLOR-SPCL
I - PRTN-HEAD
I - PRTN-JAMB
I - PRTN-FIRE
I -FLOR-TPTN
I -FLOR-WDWK
I -FNSH
Finishes
I -FURN
I -FURN-FILE
Furnishings
Furnishings: file cabinets
I -FURN-FREE
Furnishings: freestanding
New
CLG-48
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Description
Equipment
QA
Athletic Equipment
QB
Bank Equipment
QC
QD
Detention Equipment
QE
Educational Equipment
QF
QH
Hospital Equipment
QL
Laboratory Equipment
QM
Maintenance Equipment
QP
QR
Retail Equipment
QS
Site Equipment
QT
Theatrical Equipment
QV
QY
Security Equipment
QJ
User-Defined
QK
User-Defined
New
CLG-49
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Q Q -
Layer Name
Description
Computer equipment
Q -ELEV-EQPM
Q -CASE
Casework
Q -ELEV-FIXT
Q -CASE-DVDR
Q -ELEV-GLAZ
Q -ELEV-HRDW
Q -ELEV-OVHD
Q -ELEV-PATT
Q -CASE-FRAM
Q -ELEV-STRC
Q -CASE-FULL
Q -CASE-GLAZ
Q -CASE-GRND
-OTLN
-PIPE
Q -CASE-EDGE
Q -CASE-ELEV
Q -CASE-FIXT
Q -CASE-HRDW
Q -CASE-IDEN
Q -CASE-LOWR
Q -CASE-PATT
Q -CASE-SHLF
Q -CASE-SUBA
Q -CASE-UCTR
Q -CASE-UPPR
Q -CASE-WKSF
Casework: worksurface
New
-CMPQ
Q -EXHS
Q -MAJQ
Q -MAJQ-ACCS
Q -MAJQ-ENGR
Q -MAJQ-FIXD
Q -MAJQ-MOVE
Q -MAJQ-MVNG
Q -MAJQ-OVHD
Q -MAJQ-PATT
Q -MAJQ-UCTR
Q
-MINQ
Q -NICN
New
CLG-50
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Equipment (continued)
Q -POWR
Q -SPCQ
Q -SPCQ-ACCS
Q -SPCQ-ENGR
Q -SPCQ-FIXD
Q -SPCQ-MOVE
Power
Special equipment
Specialized equipment: access and
clearance lines
Specialized equipment: engineering
information
Specialized equipment: fixed
Q -SPCQ-OVHD
Q -SPCQ-PATT
Q -SPCQ-UCTR
Q -SPCQ-MVNG
CLG-51
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Fire Protection
FA
FX
Fire Suppression
FJ
User-Defined
FK
User-Defined
Layer Name
Description
F -HALN-PIPE
F -IGAS
Halon: piping
Inert gas
F -IGAS-EQPM
F -IGAS-PIPE
F -PROT
F -PROT-ALRM
F -PROT-EQPM
F -PROT-SMOK
New
Description
F -AFFF
F -AFFF-EQPM
F -CO2S
F -CO2S-EQPM
F -CO2S-PIPE
F -HALN
F -HALN-EQPM
Halon: equipment
F -AFFF-PIPE
New
F -PROT-STAN
New
CLG-53
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Sprinkler system
Sprinkler system: ceiling heads
F -SPRN-EQPM
F -SPRN-OTHD
F -SPRN-PIPE
F -SPRN-STAN
CLG-54
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Plumbing
PS
Plumbing Site
PD
Plumbing Demolition
PP
Plumbing Piping
PQ
Plumbing Equipment
PL
Plumbing
PJ
User-Defined
PK
User-Defined
Layer Name
Description
New
Description
P -ACID
P -ACID-EQPM
P -ACID-PIPE
P -DOMW-CPIP
P -ACID-VENT
P -DOMW-HPIP
P -DOMW
P -DOMW-RISR
New
P -DOMW-EQPM
New
CLG-55
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Plumbing (continued)
P -DOMW-RPIP
P -MDGS
P -MDGS-CAIR
P -MDGS-EQPM
P -MDGS-NITG
P -MDGS-NOXG
P -MDGS-OXYG
P -MDGS-PIPE
P -MDGS-SAIR
P -MDGS-VACU
P -SANR
P -SANR-PIPE
P -SANR-FIXT
P -SANR-FLDR
P -SANR-RISR
P -SANR-EQPM
P -SANR-VENT
P -STRM
P -STRM-PIPE
P -STRM-RISR
P -STRM-RFDR
CLG-56
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Description
Process
DS
Process Site
DD
Process Demolition
DJ
User-Defined
DK
User-Defined
DL
Process Liquids
DG
Process Gases
DP
Process Piping
DQ
Process Equipment
DE
Process Electrical
DI
Process Instrumentation
DW
Process Waters
DC
Process Chemicals
DA
Process Airs
DX
Process Exhaust
DR
DM
DY
Process Slurry
DO
Process Oils
DV
Process Vacuum
New
CLG-57
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Description
Process (continued)
D ANNO
D BOLD
D CNTR
D DIMS
D EQPM
D FINE
D HDLN
D IDEN
D MEDM
D MISC
D PATT
D PHTM
D PIPE
D SPEC
D SUPT
New
Layer Name
Process (continued)
D UGRD
D -DETL-BOLD
D
D
D
D
D
D
D
D
-DETL-FINE
-DETL-MEDM
-DETL-NPLT
-DETL-TEXT
-PAIR-AA~~
-PAIR-BA~~
-PAIR-CA~~
-PAIR-CDA~
D
D
D
D
D
D
-PAIR-HCDA
-PAIR-IA~~
-PAIR-OA~~
-PAIR-OFA~
-PAIR-PA~~
-PAIR-V~~~
D
D
D
D
-PCHM-ARC~
-PCHM-C~~~
-PCHM-DEV~
-PCHM-EG~~
D
D
D
D
-PCHM-H2O2
-PCHM-HCL~
-PCHM-HF~~
-PCHM-IPA~
Description
New
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Process (continued)
D -PCHM-PHOS
D -PCHM-RER~
D -PCHM-SULF
D -PCHM-TMAH
D -PDRN-AMW~
D -PDRN-CD~~
D -PDRN-CLW~
D -PDRN-CMW~
D
D
D
D
D
-PDRN-CUPW
-PDRN-CURW
-PDRN-CUSW
-PDRN-DIRC
-PDRN-DLW~
D
D
D
D
-PDRN-EGW~
-PDRN-HFW~
-PDRN-IW~~
-PDRN-MW~~
D -PDRN-NPWR
D -PDRN-OIW~
D -PDRN-OLW~
D -PDRN-OSW~
D -PDRN-PHRC
D -PDRN-PSW~
Description
New
Layer Name
Description
New
Process (continued)
Chemical: phosphoric acid - system
Chemical: solvent - system
Chemical: sulfuric acid - system
Chemical: tmah - system
Drains: ammonia waste - system
Drains: condensate drain - system
Drains: concentrated lead waste system
Drains: concentrated metals waste system
Drains: copper plating waste system
Drains: copper rinse waste - system
Drains: copper slurry waste - system
Drains: di reclaim - system
Drains: dilute waste - system
Drains: ethylene glycol waste system
Drains: hydrofluoric waste - system
Drains: industrial waste - system
Drains: metals waste - system
Drains: non-potable water reuse system
Drains: organic industrial waste system
Drains: organic liquid waste - system
Drains: organic solvent waste system
Drains: phosphoric acid reclaim system
Drains: photo solvent waste - system
D
D
D
D
D
-PDRN-SDD~
-PDRN-SLW~
-PDRN-SULF
-PDRN-SULR
-PDRN-SW~~
D -PDRN-SWF~
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
-PDRN-SWNF
-PEXH-AMEX
-PEXH-AREX
-PEXH-HTEX
-PEXH-SCEX
-PEXH-SVEX
-PGAS-AR~~
-PGAS-ARB~
-PGAS-BUT~
-PGAS-CLG~
-PGAS-H2~~
-PGAS-HE~~
-PGAS-HPN2
-PGAS-HPO2
-PGAS-LCHE
-PGAS-N2~~
-PGAS-N2O~
-PGAS-NG~~
-PGAS-O2~~
-PGAS-PRO~
-PGAS-SG~~
-PGAS-UN2~
CLG-59
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Process (continued)
D -PGAS-VN2~
D -PGAS-WAR~
D -PIPE-CNTR
D -PIPE-EQPM
D -PIPE-HDLN
D -PIPE-IDEN
D -PIPE-MISC
D -PIPE-PATT
D -PIPE-PIPE
D -PIPE-UGRD
D -PLQD-LPG~
D -POIL-LO~~
D -PSLR-SLR~
D -PSLR-SLS~
D -PVAC-CLV~
D -PVAC-CV~~
D -PVAC-EV~~
D -PVAC-HV~~
D -PVAC-HVA~
D -PVAC-PV~~
D -PWTR-BFW~
D -PWTR-DIR~
D
D
D
D
D
-PWTR-DIS~
-PWTR-DIWP
-PWTR-FW~~
-PWTR-HDIR
-PWTR-HDIS
Description
New
Layer Name
Process (continued)
D -PWTR-HDRC
D -PWTR-HPDR
D -PWTR-HPDS
D -PWTR-ICW~
D -PWTR-NPW~
D -PWTR-PCWR
D -PWTR-PCWS
D -PWTR-PW~~
D -PWTR-RO~~
D
D
D
D
-PWTR-ROR~
-PWTR-TDIR
-PWTR-TDIS
-PWTR-TW~~
D -PWTR-UPRW
D -PWTR-UPW~
Description
New
CLG-60
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Mechanical
MS
Mechanical Site
MD
Mechanical Demolition
MH
Mechanical HVAC
MP
Mechanical Piping
MI
Mechanical Instrumentation
MJ
User-Defined
MK
User-Defined
Layer Name
Description
New
Description
M -ANNO
M -ANNO-DLTA
Annotation
Annotation: revision delta
M -BRIN-EQPM
M -BRIN-PIPE
M -ANNO-TTLB
Annotation: titleblock
M -CHIM
M -ANNO-TTLB-PROS
M -CMPA
M -CMPA-ANNO
M -BRIN
Brine systems
New
New
CLG-61
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Mechanical (continued)
New
Layer Name
M -CWTR-ANNO
M -CWTR-CONP
M -CMPA-PEQP
M -CWTR-PIPE
M -CNDW
M -CNDW-ANNO
M -CNDW-CONP
M -CNDW-EQPM
M -CNDW-PIPE
M -CNDW-RETN
M -CNDW-RETN-PIPE
M -CNDW-RETNSKCH
M -CNDW-SUPP
M -CNDW-SUPP-PIPE
M -CWTR-EQPM
M -CWTR-RETN
M -CWTR-RETN-PIPE
M -DOMW-ANNO
M -DOMW-MKUP
M -DUAL
M -DUAL-ANNO
M -DUAL-RETN
M -CNDW-SUPPSKCH
M -DUAL-RETN-PIPE
M -CNDW-SYMB
M -DUAL-RETN-SKCH
M -CONT
M -CONT-THER
M -DUAL-SUPP
M -DUAL-SUPP-PIPE
M -CONT-WIRE
M -CWTR
New
Mechanical (continued)
M -CMPA-EQPM
M -CMPA-PIPE
M -CMPA-PPIP
Description
M -DUAL-SUPP-SKCH
CLG-62
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Mechanical (continued)
New
Layer Name
Description
Mechanical (continued)
M -DUAL-SYMB
M -DUST
M -FUEL-GGEP-MPIP
M -DUST-DUCT
M -FUEL-GPRP
M -FUEL-OPRP
M -DUST-EQPM
M -FUEL-OGEP
M -ELHT
Electric heat
M -ELHT-EQPM
M -ENER
M -FUEL-OGEP-DISC
M -ENER-EQPM
M -ENER-WIRE
M -EXHS
M -EXHS-CDFF
Exhaust system
Exhaust system: ceiling diffusers
M -EXHS-DUCT
M -EXHS-EQPM
M -EXHS-RFEQ
M -FUEL
Fuel systems
M -FUEL-EQPM
M -FUEL-GGEP
New
M -FUEL-RPIP
M -FUEL-SPIP
M -FUME
M -FUME-DUCT
M -FUME-EQPM
M -GLYC
M -GLYC-ANNO
M -FUEL-GGEP-LPIP
M -GLYC-RETN
M -GLYC-RETN-PIPE
M -FUEL-GGEP-LQPG
M -GLYC-RETN-SKCH
M -GLYC-SUPP
CLG-63
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Mechanical (continued)
New
Layer Name
Description
New
Mechanical (continued)
M -GLYC-SUPP-PIPE
M -GLYC-SUPP-SKCH
M -GLYC-SYMB
M -HOTW
M -HOTW-ANNO
M -HOTW-EQPM
M -HVAC-CLDA-SIZE
M -HOTW-PIPE
M -HOTW-RETN
M -HVAC-CLDA-SSCH
M -HOTW-RETN-PIPE
M -HVAC-DMPR
M -HOTW-RETN:
SKCH
M -HOTW-SUPP
M -HVAC-DOOR
M -HVAC-EFAN
M -HOTW-SUPP-PIPE
M -HVAC-EPDU
M -HOTW-SUPPSKCH
M -HVAC-EPIP
M -HOTW-SYMB
M -HVAC
M -HVAC-EQPM
M -HVAC-ANNO
M -HVAC-EXHS
M -HVAC-BOXD
M -HVAC-BOXS
M -HVAC-CDFF
M -HVAC-CLDA
CLG-64
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Mechanical (continued)
M -HVAC-EXHS-SECT
M -HVAC-EXHS-SIZE
New
Layer Name
Description
Mechanical (continued)
HVAC systems: exhaust air: ductwork
section
HVAC systems: exhaust air: ductwork
size
M -HVAC-RETN-SECT
M -HVAC-HOTA
HVAC systems: hot air
M -HVAC-HOTA-ANNO HVAC systems: hot air: annotation
M -HVAC-RETN-SIZE
New
M -HVAC-PIPE
M -HVAC-RDFF
M -HVAC-RDFF-IDEN
M -HVAC-RETN
M -HVAC-SUPP
HVAC systems: supply ductwork
M -HVAC-SUPP-ANNO HVAC systems: supply ductwork:
annotation
M -HVAC-SUPP-DUCT HVAC systems: supply ductwork:
ductwork
M -HVAC-SUPP-EQPM HVAC systems: supply ductwork:
equipment
M -HVAC-SUPP-RSCH HVAC systems: supply ductwork:
sketch line round or oval duct
M -HVAC-SUPP-SECT HVAC systems: supply ductwork:
ductwork section
M -HVAC-SUPP-SIZE
HVAC systems: supply ductwork:
ductwork size
M -HVAC-SUPP-SSCH HVAC systems: supply ductwork:
sketch line rectangular duct
M -HVAC-SDFF
HVAC systems: supply diffusers
M -HVAC-SDFF-IDEN
M -LGAS
CLG-65
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Mechanical (continued)
New
Layer Name
Description
New
Mechanical (continued)
M -LGAS-EQPM
M -LGAS-PIPE
M -PROC
M -PROC-EQPM
Process systems
Process systems: equipment
M -MACH
Machine shop
M -PROC-PIPE
M -MDGS
M -MDGS-CAIR
Medical gas
Medical gas: compressed air
M -RAIR
M -RCOV
M -MDGS-EQPM
M -RCOV-EQPM
M -MDGS-NITG
M -MDGS-NOXG
M -RCOV-PIPE
M -REFG
M -MDGS-OXYG
M -REFG-ANNO
M -MDGS-PIPE
M -MDGS-SAIR
M -REFG-DISC
M -REFG-EQPM
M -MDGS-VACU
M -REFG-PIPE
M -MKUP
M -MKUP-CDFF
M -REFG-RETN
M -REFG-SUPP
M -MKUP-DUCT
M -SMOK
M -MKUP-EQPM
M -MPIP
M -SMOK-CDFF
M -MPIP-ANNO
M -SMOK-DUCT
M -SMOK-EQPM
M -MPIP-IDEN
M -SPCL
Special systems
M -MPIP-PIPE
M -SPCL-EQPM
M -SPCL-PIPE
M -MPIP-SYMB
M -STEM
Steam systems
M -NGAS
M -NGAS-EQPM
M -STEM-ANNO
M -STEM-BLBD
M -NGAS-PIPE
CLG-66
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Mechanical (continued)
M -STEM-BLBD-PIPE
M -STEM-HPIP-PIPE
M -STEM-HPIP-SKCH
M -STEM-LPIP
M -STEM-LPIP-PIPE
M -STEM-LPIP-SKCH
M -STEM-MPIP
M -STEM-MPIP-PIPE
M -STEM-MPIP-SKCH
M -STEM-SYMB
M -TEST
Test equipment
CLG-67
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Electrical
ES
Electrical Site
ED
Electrical Demolition
EP
Electrical Power
EL
Electrical Lighting
EI
Electrical Instrumentation
ET
Electrical Telecommunications
EY
EJ
User-Defined
EK
User-Defined
Layer Name
Description
E -BELL
E -CABL
Bell system
Cable system
E -ALRM
Alarm system
E -CABL-ANNO
E -AUXL
Auxiliary systems
E -CABL-ANNO-KEYN
New
Layer Name
E E -
-1LIN
-RISR
Description
New
New
CLG-69
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Electrical (continued)
New
Layer Name
Description
New
Electrical (continued)
E -CABL-ANNO-NOTE
E -CABL-COAX
E -COMM-ANNONOTE
E -COMM-CIRC
E -CABL-FIBR
E -CABL-MULT
E -CABL-REVC
E -COMM-CLNG
E -CABL-REVS
E -COMM-CNMB
E -CABL-TRAY
E -COMM-EQPM
E -CCTV
E -CLOK
Closed-circuit TV
Clock system
E -COMM-IDEN
E -CLOK-ANNO
E -CLOK-ANNO-KEYN
E -CLOK-ANNO-NOTE
E -COMM-REVC
E -CLOK-CIRC
E -COMM-REVS
E -CLOK-CLNG
E -CLOK-CNMB
E -COMM-WALL
E -CLOK-EQPM
E -CLOK-FLOR
E -CLOK-IDEN
E -CTRL
E -CTRL-DEVC
Control systems
Control systems: devices
E -CTRL-WIRE
E -CLOK-REVC
E -CLOK-REVS
E -CLOK-WALL
E -DATA
E -DATA-ANNO
Data outlets
Data outlets: annotation
E -DATA-ANNO-KEYN
E -COMM
E -COMM-ANNO
E -DATA-ANNO-NOTE
E -DATA-CIRC
E -DATA-CLNG
E -COMM-ANNOKEYN
E -DATA-CNMB
E -DATA-EQPM
CLG-70
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Electrical (continued)
New
Layer Name
Description
Electrical (continued)
E -DATA-FLOR
E -DATA-IDEN
E -DICT-CLNG
E -DATA-REVC
E -DICT-CNMB
E -DATA-REVS
E -DATA-WALL
E -DIAG
Diagrams
E -DIAG-ANNO
E -DIAG-ANNO-KEYN
Diagrams: annotation
Diagrams: annotation: keynotes
E -DICT-REVC
E -DIAG-ANNO-NOTE
E -DICT-REVS
E -DIAG-BKRS
E -DIAG-BUSS
Diagrams: breakers
Diagrams: bus duct
E -DICT-WALL
E -DIAG-ENCL
E -FIRE
E -DIAG-EQPM
E -DIAG-FEED
Diagrams: equipment
Diagrams: feeders
E -FIRE-ANNO
E -DIAG-FLOR
E -FIRE-ANNO-KEYN
E -DIAG-GRND
E -DIAG-REVC
Diagrams: grounding
Diagrams: revision clouds
E -FIRE-ANNO-NOTE
E -DIAG-REVS
Diagrams: revisions
E -DIAG-SWCH
E -DIAG-XFMR
Diagrams: switches
Diagrams: transformers
E -FIRE-CIRC
E -FIRE-CLNG
E -DICT
E -DICT-ANNO
E -DICT-ANNO-KEYN
E -DICT-ANNO-NOTE
E -DICT-CIRC
New
E -DICT-EQPM
E -DICT-IDEN
E -FIRE-CNMB
E -FIRE-EQPM
E -FIRE-IDEN
E -FIRE-REVC
CLG-71
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Electrical (continued)
E -FIRE-REVS
New
Layer Name
Description
Electrical (continued)
E -INST-REVS
E -INST-WALL
E -GRND-CLNG
E -GRND-CNMB
E -GRND-DIAG
E -INTC
E -LEGN
Intercom system
Legend of symbols
E -LITE
Lighting
E -GRND-EQPM
E -GRND-IDEN
E -GRND-REFR
E -LITE-ANNO
E -LITE-ANNO-KEYN
Lighting: annotation
Lighting: annotation: keynotes
E -LITE-ANNO-NOTE
E -LITE-CIRC
E -LITE-CIRC-CRIT
Lighting: circuits
Lighting: circuits: critical
E -LITE-CIRC-EMER
E -LITE-CIRC-NUMB
E -LITE-CLNG
E -LITE-CLNG-CRIT
E -FIRE-WALL
E -GRND
E -GRND-ANNO
New
E -INST-CNMB
E -INST-EQPM
E -INST-IDEN
E -INST-REVC
E -GRND-REVC
E -GRND-REVS
E -GRND-WALL
E -GRND-EQUI
E -INST
E -INST-ANNO
Instrumentation system
Instrumentation system: annotation
E -INST-ANNO-KEYN
E -LITE-CLNG-EMER
E -LITE-CLNG-EXIT
E -INST-ANNO-NOTE
E -LITE-CNMB
E -INST-CIRC
E -LITE-CNMB-CRIT
E -LITE-CNMB-EMER
E -INST-CLNG
E -LITE-EMER
Lighting: emergency
E -LITE-EQPM
Lighting: equipment
CLG-72
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Electrical (continued)
New
Layer Name
Description
New
Electrical (continued)
E -LITE-EQPM-CRIT
E -LITE-EQPM-EMER
E -LTNG-ANNO-NOTE
E -LITE-EXIT
Lighting: exit
E -LITE-EXTR
E -LITE-FLOR
E -LTNG-CIRC
E -LTNG-CLNG
E -LITE-OTLN
E -LITE-SPCL
E -LITE-REVC
Lighting: special
Lighting: revision clouds
E -LTNG-EQPM
E -LITE-REVS
Lighting: revisions
E -LTNG-IDEN
E -LITE-ROOF
E -LITE-WALL
E -LTNG-REVC
E -LITE-WALL-CRIT
E -LITE-WALL-EMER
E -LITE-WALL-EXIT
E -LITE-SWCH
Lighting: switches
E -LITE-SWCH-CRIT
E -LITE-SWCH-EMER
E -LITE-IDEN
E -LITE-IDEN-CRIT
E -LITE-IDEN-EMER
E -LITE-JBOX
E -LTNG
E -LTNG-ANNO
E -LTNG-ANNO-KEYN
E -LTNG-CNMB
E -LTNG-REVS
E -LTNG-WALL
E -NURS
E -NURS-ANNO
Nurse call system: annotation
E -NURS-ANNO-KEYN Nurse call system: annotation:
keynotes
E -NURS-ANNO-NOTE Nurse call system: annotation: notes
E -NURS-CIRC
E -NURS-CLNG
E -NURS-CNMB
E -NURS-EQPM
E -NURS-FLOR
E -NURS-IDEN
E -NURS-REVC
CLG-73
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
Electrical (continued)
New
Layer Name
Description
New
Electrical (continued)
E -NURS-REVS
E -NURS-WALL
E -POWR-SWBD
E -POWR-URAC
Power: switchboards
Power: underfloor raceways
E -PGNG
Paging system
E -POWR-UCPT
E -POWR
E -POWR-ANNO
Power
Power: annotation
E -POWR-ROOF
E -POWR-REVC
Power: roof
Power: revision clouds
E -POWR-ANNOKEYN
E -POWR-REVS
Power: revisions
E -POWR-ANNONOTE
E -POWR-WALL
E -POWR-WALL-CRIT
Power: wall-mounted
Power: wall-mounted: critical
E -POWR-BUSW
Power: busways
E -SERT
Security
E -POWR-CABL
E -POWR-CIRC
E -SERT-ANNO
E -SERT-ANNO-KEYN
Security: annotation
Security: annotation: keynotes
E -POWR-CIRC-CRIT
E -SERT-ANNO-NOTE
E -SERT-CIRC
E -SERT-CLNG
Security: circuits
Security: ceiling-mounted
E -SERT-CNMB
E -SERT-EQPM
E -SERT-FLOR
Security: equipment
Security: floor-mounted
E -SERT-IDEN
E -SERT-REVC
E -SERT-REVS
E -POWR-CNMB
E -POWR-CNMB-CRIT
E -POWR-DEVC
Power: devices
E -POWR-EQPM
E -POWR-EQPM-CRIT
Power: equipment
Power: equipment: critical
E -POWR-EXTR
Power: exterior
E -POWR-FEED
E -POWR-FLOR
Power: feeders
Power: floor-mounted
E -POWR-FLOR-CRIT
E -POWR-IDEN
E -POWR-JBOX
E -POWR-PANL
Power: panels
E -SERT-WALL
Security: wall-mounted
E -SITE
E -SITE-UNDR
Site
Site: underground lines
E -SITE-POLE
E -SITE-OVHD
E -SOUN
E -TVAN
TV antenna system
CLG-74
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Electrical (continued)
E -TVAN-ANNO
E -TVAN-ANNO-KEYN
E -TVAN-ANNO-NOTE
E -TVAN-CIRC
E -TVAN-CLNG
E -TVAN-CNMB
E -TVAN-EQPM
E -TVAN-IDEN
E -TVAN-REVC
E -TVAN-REVS
E -TVAN-WALL
CLG-75
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Telecommunications
TA
Audio Visual
TC
TI
Intercom
TM
Monitoring
TN
Data Networks
TT
Telephone
TY
Security
TJ
User-Defined
TK
User-Defined
Layer Name
Description
New
Description
New
T T -
-1LIN
-DIAG
T -RISR
T -ALRM
T -
-EQPM
T -BELL
Bell system
T T -
-JACK
-JBOX
T -CABL
T -CABL-COAX
Cable systems
Cable systems: coax cable
New
CLG-77
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Layer Name
Description
New
Telecommunications (continued)
T -CABL-FIBR
T -CABL-MULT
T -CABL-TRAY
T -CATV
T -CLOK
T -CCTV
T -DATA
T -DICT
T -ELEC
T -EMCS
T -FIRE
T -INTC
Intercom / PA systems
T -NURS
T -PGNG
T -PHON
Telephone system
T -SERT
T -SOUN
Security system
Sound system
T -TVAN
CLG-78
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Resource
RC
Resource Civil
RS
Resource Structural
RA
Resource Architectural
RM
Resource Mechanical
RE
Resource Electrical
RJ
User-Defined
RK
User-Defined
New
Description
New
CLG-79
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Other Disciplines
XJ
User-Defined
XK
User-Defined
New
Description
New
CLG-81
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Contractor/Shop Drawings
ZJ
User-Defined
ZK
User-Defined
New
Description
New
CLG-83
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
The Layer Names shown below provide examples for the use of Major
and Minor Group field codes for this discipline. See page CLG-8 for
complete rules and options governing the use of Major and Minor Group
field codes.
Designator
Description
Operations
OJ
User-Defined
OK
User-Defined
New
Description
New
CLG-85
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
A1B2 1 0 _ _ D
Agent Responsible
[Building]
Element
(OPTIONAL FIELDS)
NB 1 0 1 3 1 F RC
Presentation
Status
Phase
Projection
Sector
Scale
Work
(OPTIONAL FIELDS)
While the U.S. NCS and ISO 13567 differ somewhat in their approach to standards for
CAD layers, they are alike in several important respects. Both standards specify the
names of the data fields that make up a typical layer name, define the field names, specify
which fields are mandatory (required) and which fields are optional, specify the number
of characters in each field, and specify the order in which the fields are to appear.
When one compares the NCS and ISO layer formats shown at left, the question
immediately arises whether it is possible to produce electronic building design documents
that conform to both the U.S. NCS and ISO 13567. The answer is a qualified yes.
(REQUIRED FIELDS)
The International Standards Organization (ISO) is the only recognized international body
promulgating standards in the area of electronic building design data. ISO Standard
13567, Organization and Naming of Layers for CAD, can be purchased at
http://www.ansi.org. The complete document is in three parts: 13567-1, 13567-2, and
13567-3.
Both standards provide several options for naming layers. The range of options allows
either standard to meet the needs of diverse users and projects. By carefully choosing
from among the available U.S. NCS options for naming CAD layers, and by establishing
and adhering to the guidelines at the end of this Commentary, documents can be
produced that are in full conformance with the U.S. NCS and in conceptual
conformance with ISO 13567 for the naming of CAD layers (an acceptable alternative to
ISO default conformance). Adoption of the approach outlined herein could arguably
reduce the effort required to produce documents in conformance with ISO 13567 by
eliminating the ISO-mandated task of prescribing valid field codes for each project.
CLG-87
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Field Codes
TWO STANDARDS OR ONE?
The U.S. NCS and ISO 13567 differ in one important respect. The U.S. NCS prescribes
the valid alpha-numeric field codes that can appear in each data field, and the definitions
of the field codes (e.g., EQPM = equipment). Users of ISO 13567 must determine, for
each project, the valid field codes for that project and their definitions. ISO 13567 users
are required to document this information in a metadata file known as a layer naming
system definition file that must accompany the project data files. In its simplest form, this
is nothing more than a tab-delimited text file.
There are valid reasons for both approaches. The prescriptive approach of the U.S. NCS
relieves users of the task of developing and documenting field codes for every project.
However, in order to accommodate all possible users, the list of prescribed NCS field
codes must be comprehensive. By not prescribing field codes, ISO 13567 allows the ISO
layer format to be applied uniformly without having to define all possible field codes in
advance.
CLG-88
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
A1B2 1 0 _
NB 1 0 1 3 1 F RC
A1B2 1 0 _
NB 1 0 1 3 1 F RC
Agent Responsible
[Building] Element
A1B2 1 0 _
D _ NB 1 0 1 3 1 F RC
Presentation
(Optional Fields)
A1B2 1 0 _
D _ NB 1 0 1 3 1 F RC
A1B2 1 0 _
D _ NB 1 0 1 3 1 FRC
A1B2 1 0 _
D _ NB 1 0 1 3 1 F RC
A1B2 1 0 _
D _ NB 1 0 1 3 1 F RC
A1B2 1 0 _
D _ NB 1 0 1 3 1 F RC
A1B2 1 0 _
D _ NB 1 0 1 3 1 F RC
Status
Sector
Phase
Projection
Scale
Work Package
CAD data sets that adhere to ISO 13567 with respect to field names, field length, field
definition and field order (as shown at left), and that are accompanied by the required
layer naming system definition file, are defined by ISO to be in default conformance
with the ISO standard.
ISO 13567 anticipates that groups of users or national standards bodies might not only
wish to prescribe a list of valid field codes (as the U.S. NCS has done), but might also
wish to vary from the specified ISO layer format. 13567-3 is explicitly designed to
allow national standards bodies (or projects where agreement is reached between the
parties) to implement layer naming conventions which satisfy the requirements of the
[ISO] standard while using alternative and more convenient layer naming structures
and codes.
To permit this, ISO 13567-3 establishes rules for modifying the layer format itself. As
with the field codes, users are required to fully document layer format modifications in
the layer naming system definition file. CAD data sets that adhere to these rules are
defined by ISO as being in conceptual conformance with the ISO standard, an approved
alternative to default conformance.
The rules for conceptual conformance specify that the mandatory data fields must
always be used, but the order of all fields in the layer name (both mandatory and
optional), the number of optional fields used, and the number of characters in each field
can vary from the default ISO layer format. Additionally, the names of the fields can
differ from the names specified, as long as the conceptual definition of each field
conforms to the ISO standard. All modifications to the default layer format must be
applied uniformly throughout the project. Layer names must all be of the same length,
use the same set of mandatory and optional fields in the same order, and have the same
number of characters per field.
These rules allow data sets created in conceptual conformance with ISO 13567 to be
mapped to the ISO 13567 default layer format. However, ISO does not require users to
actually map or otherwise convert the data into the default layer format.
CLG-89
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
Discipline Designator
Agent Responsible
Element
Presentation
Status**
Status
(none)
Sector
Status (Phase)**
Phase
Projection
(none)
Scale
(none)
Work Package
**
CLG-90
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
CLG-91
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
contained in the drawing file or layer is mechanical systems, the mechanical engineer is
likely to be the design professional under whose supervision the data was created.
U.S. NCS Field Code Restrictions
(for conceptual conformance to ISO 13567)
Users who wish to produce data that is in conformance with the U.S. NCS and in
conceptual conformance with ISO 13567 can do so by establishing a rule for their
projects that data will be created only under the supervision of the design professional
typically responsible for the subject matter. In this way, the conceptual definition for the
data field can be BOTH category of subject matter contained in the file or layer
designated AND construction specialist responsible for the data. Implementation of
this rule can help reduce the risk of professional liability by minimizing the likelihood of
conflicts that might arise when different elements of the same building system are
designed by more than one design professional.
A I - WA L L - T E X T - N
A I - ANNO - T E X T - N
Major Group (Element)
(Presentation) Annotation
A I - WA L L - F U L L - T E X T - N
(Presentation) Annotation
A I - WA L L - E L E V - N
(Projection) Drawing View
A I - WA L L - F U L L - E L E V - N
(Projection) Drawing View
A - WA L L - E L E V - T E X T - N
(Status) Status
A - WA L L - E L E V - T E X T - 2
A key principal of the ISO 13567 layer format is that each data field can be used to define
only one category of data. Duplicate use of a field is prohibited. This ensures that data
sets in conceptual conformance can be readily mapped to the ISO default layer format.
Adherence to this provision requires U.S. NCS users to restrict their use of certain U.S.
NCS field codes.
The U.S. NCS allows ANNO to be used as a Major Group, which allows all annotation
to be placed in a defined group of layers. This results in a duplicate use of the Major
Group field. The corresponding field in ISO, Element, is reserved for major building
elements. Therefore, the field code ANNO cannot be used at all (Figure 1). However,
the prescribed annotation Minor Group field codes (TEXT, DIMS, etc.) can be used to
modify any preceding Major/Minor Group, provided that the field in which they appear is
reserved for annotation field codes.
If Drawing View field codes are used (Figure 2), the Minor Group field in which they
appear must likewise exclude any other field codes.
If the Status field is used (Figure 3), the allowable field codes must be restricted to the
specified letters (to correspond to the ISO field Status) or to the specified numbers (to
correspond to the ISO field Phase) but not both.
(Phase) Status
CLG-92
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
A I - WA L L - F U L L - T E X T - N
A I - WA L L - F U L L - T E X T - N
Major, Minor Group (Element)
A I - WA L L - F U L L - T E X T - N
(Presentation) Annotation
A I - WA L L - F U L L - T E X T - N
(Status) Status
Example 1
A - WA L L - E L E V - T E X T - 2
A - WA L L - E L E V - T E X T - 2
Major Group (Element)
A - WA L L - E L E V - T E X T - 2
Drawing View (Projection)
A - WA L L - E L E V - T E X T - 2
(Presentation) Annotation
A - WA L L - E L E V - T E X T - 2
(Phase) Status
The examples shown here illustrate two possible U.S. NCS layer formats that are in
conceptual conformance with ISO 13567. Note that ISO 13567 does not use dashes as
field delimiters. For purposes of ISO conformance, the dashes in the NCS layer format
are defined as an additional character of the field preceding it.
Example 1 shows the optional two-character U.S. NCS Level 2 Discipline Designator;
together with the dash that follows it, this field is defined as three (3) characters in length.
A Major and one Minor Group are defined as corresponding to the ISO field [Building]
Element. The field is ten (10) characters in length. The second Minor Group is reserved
for Annotation field codes, corresponds to the ISO field Presentation, and is five (5)
characters in length. The final field is Status, which corresponds to the ISO field of the
same name, and is one (1) character in length.
Example 2 shows the U.S. NCS required Level 1 Discipline Designator only, and is
defined as two (2) characters in length. The Major Group is defined as corresponding to
the ISO field [Building] Element, and is five (5) characters in length. The first Minor
Group is reserved for Drawing View field codes, corresponds to the ISO field
Projection, and is five (5) characters in length. The second Minor Group is reserved for
Annotation field codes, corresponds to the ISO field Presentation, and is five (5)
characters in length. The final field is reserved for Phase field codes, corresponds to the
ISO field Phase, and is one (1) character in length.
Note that for ISO conformance, the total length of the layer name must be the same for all
layers on a given project. Layer names that do not require a certain field, such as
Annotation, must use placeholders (usually dashes or underscores) to maintain the
length of the layer name and the relative position of the fields.
While the ISO 13567 rules for conceptual conformance allow the fields to appear in any
order, this is not permitted by the U.S. NCS. The fields must be in the order of Discipline
Designator, Major Group, Minor Group 1, Minor Group 2, Status. If a Minor Group field
is used to modify the building element shown in the Major Group, that Minor Group
must appear immediately following the Major Group.
Example 2
COMMENTARY: U.S. NCS AND ISO 13567
CLG-93
U.S. NATIONAL CAD STANDARD FOR ARCHITECTURE, ENGINEERING, & CONSTRUCTION (A/E/C)
VERSION 3.1
A - WA L L - E L E V - _ _ _ _ - N
A - WA L L - E L E V - T E X T - N
1. Require that all documents be prepared only under the supervision of the design
professional typically responsible for the subject matter contained in the documents.
Figure 4
CLG-94