Install slide bolts by placing the edge flush with the roller door in the first groove, drilling two holes and fitting the bolts without over tightening, then drilling a slot for the slide bolt to pass through the track and locking it with a padlock.
Original Description:
HOW TO INSTALL SLIDE BOLTS from ARD Garage doors.
Visist us at
Install slide bolts by placing the edge flush with the roller door in the first groove, drilling two holes and fitting the bolts without over tightening, then drilling a slot for the slide bolt to pass through the track and locking it with a padlock.
Install slide bolts by placing the edge flush with the roller door in the first groove, drilling two holes and fitting the bolts without over tightening, then drilling a slot for the slide bolt to pass through the track and locking it with a padlock.
Place the edge of the slide bolt flush with the edge of the roller door in the first groove.
Drill two (2) holes and fit bolts provided.
DO NOT OVER TIGHTEN Drill a slot for the slide bolt to go through in the roller door track. Slide bolt through slot and place a padlock through the hole.