Professional Documents
Culture Documents
MicroGuard414
8
Operational training
MicroGuard414
8
Rated Capacity
Actual Load
Percentage of Rated Capacity
Radius of the Load
Angle of the Main Boom
Working Area
Crane Configuration
Page 1 of 9
PN W000020- 10/03/02
6
1. Radius/height
2. Parts of line
3. Winch in use
4. The angle/length
5. The working area
6. Outriggers or tires
7. Current lifting point
9
1.
2.
3.
4.
5.
6.
7.
8.
10 11 12 13
contrast control
12. Down
13. Up
7
1.
2.
3.
4.
5.
6.
7.
Radius/height button
Parts-of-line button
Winch select button
Angle/length button
Working area icon
Stowed deduct button
Crane setup button
CRANE SETUP
Starting the Setup - Chassis Configuration
FULLY EXTENDED
OUTRIGGERS
Use n or p key
then SELECT key
Select O/Rs or
tire confign
Page 4 of 9
PN W000020- 10/03/02
CRANE SETUP
Select Boom Configuration
MAIN BOOM
Use n or p key
then SELECT key
Select
Main Boom
CRANE SETUP
Auxiliary Head Selection
AUX SHEAVE
Use n or p key
then SELECT key
Select
aux head
CRANE SETUP
Selecting Erected Attachments
NO ERECTED
ATTACHMENT
Use n or p key
then SELECT key
Select erected
attachments
CRANE SETUP
Lifting Point for Front Winch
MAIN BOOM
Use n or p key
then SELECT key
Point of lift
for MAIN WINCH
CRANE SETUP
Lifting Point for the Rear Winch
AUX SHEAVE
Use n or p key
then SELECT key
Point of lift
for REAR WINCH
CRANE SETUP
Selecting Parts-of-line and Stowed Deducts
2 1
MicroGuard414
8
Page 7 of 9
PN W000020- 10/03/02
92.0
98.5
276.0
73.2
MicroGuard414
MIN ANGLE
MAX ANGLE
MAX LENGTH
MAX HEIGHT
OFF
OFF
LT. SWING
RT. SWING
OFF
OFF
OFF
60.0
EXAMPLE B
To have an alarm whenever the boom is above 60
angle;
1. Press VIEW to access the alarm screen.
2. Press Down Arrow to move cursor to MAX ANGLE
Move the boom to 60
3. Press SET to enter alarm - The set Angle will
toggle with the word SET
Page 8 of 9
W000020- 10/03/02
MicroGuard414
MAX LENGTH
MAX HEIGHT
OFF
OFF
LT. SWING
RT. SWING
OFF
OFF
9 of 9
PN W000020- 10/03/02