Original/Duplicate
APPLICATION FOR SELF FINANCE ITC
ANNEXURE - 1
[ To be Submitted in Original & Duplicate at following
address ]
DIRECTORATE OF EMPLOYMENT AND TRAINING,
BLOCK NO.1, 3RD FLOOR,
DR. JIVRAJ MEHTA BHAVAN,
GANDHINAGAR - 382 010
*FORM FEE: Rs. 200/-
Processing Fee Rs. 5000/- (Non refundable)
(In favour of Gujarat Council of Vocational
Training, Payable at Gandhinagar.)
D.D. No.
Application Form No.
Date of issue: /02/2015
Date.
Drawn on.
Last date for receiving
application: 24 -02 -2015
1. Name of Public Limited Company/Trust/ Society (Here in after
referred as 'Establishment’) who owns the Training Institute:
2. Registration No. ifregistered under Public Limited Company/Trust/
Society Act.
3. Name of Trustee / Chairman
4. Name of Training Institute's Incharge
5. Full address of Training Institute
6. Phone No. with STD code: (0)
7, E-mail address
Particulars of the trade/units already working at the institute.
(™)
Sr.
No.
Name of the
trade
Year of
sanction
Sanctio
ned
seats
On roll | Sanction letter of | Affiliated
trainees | DET No. & Date | or not?
*If application form is downloaded from website form fee of Rs.200/- will have to be paid at time of
submission.Section 2
Particulars of Trades selected for Training :
(2.1) Particulars of the trade / units proposed to be started under NCVT
pattem as per selected.
(Please refer Annexure -" A'"for available Trade name )
Sr. No. Name of Trade Seating No. of
capacity units
per unit
Total:
(2.2) Particulars of the trade / units proposed to be started under GCVT
pattern as per selected,
(Please refer Annexure
" for available trade name )
St. No.
Name of Trade
Seating
capacity per unit
No. of units
Total:Section 3
Infrastructure:
3.1)
Available land in acre with the Training Institute.
(3.2) Area proposed to be provided: Space should be adequate as per
trade, and if it is fixed by NCVT/GCVT, it should be as per
requirement. Norms are available on concerned website, Wherever
norms are not specified, DET's decision on it will be final.
Owned or rented Building ?
Sr. Trade ‘Area Area Shortageif | Any
No required as | __ presently Any. Addition/
per norms. | available (in alteration
(insq. | sq. meters.) required?
meters.) Give Details.
Theory Rooms
Library rooms
Total
Whether photographs attached? Yes /NO
(Please attach photographs of site / infrastructure together with
application form
positively.)
(3.3) Details of Tools/Equipment/Machinery available in case of
NCVTI/GCVT pattern. ( Please refer to the respective trade syllabus
for norms.)
Sr. Ttem Nos. Required | Nos. Available | Nos. Shortage /
No. as per Norms Surplus3.4)
(5)
(3.6)
B12)
(3.8)
G9)
Total Power supply required as per norms for all the trades
applied for KW
Power supply should be adequate as per trade and if it is fixed by
NCVT/GCVT it should be as per requirement, Norms are
available on concemed website, Wherever norms are not specified,
DET's decision on it will be final.
Power supply available KW
Water supply availability (Yes/No)
Availability of Sanitary block facility (Yes/No)
Transportation (Name of nearest Bus stand/Rly Station):
Distance km.
Details if any.Section 4
Tr
ing Schedule
(4.1) Proposed Trades & Batch.
Sr.
No.
Trades
No. of
Batch
No. of Shift
Shift Timing
Proposed
The shift timing should be within 7:30 a.m. to 8:00 p.m.
(4.2) Monitoring DET will implement and monitor the training activities
through Government nodal ITIs and office of Deputy Director
(Training)
(4.3) Testing and Certification : GCVT will conduct final trade test at the
center decided by council and NCVT / GCVT Certificated to the
successful person would be awarded,
(4.4) Course fees with justification: ( Attached separate sheet if required )
Sr. No.
Trade
Pattern
Proposed fee per
trainee / per year.
(4.5) Justification of the proposed vocational course(s)/trade (s) Looking
to Employment Opportunity: (Attached separate sheet if required)Section 5
Documents to be submitted
Following documents should be furnished along with application
otherwise the application will not be considered.
1. Copy of Certificates of registration of the Society / Trust / Public
Lid. Company under the Society Registration act 1860, Bombay Public
Trust Act 1950, or Companies act 1957 with public Limited status
respectively.
2. Certified copy of the resolution of the Board of Directors /
Trustees of the establishment by which the Training Institute is
permitted for starting courses on self finance basis.
w
. Please attach the duly certified balance sheet of the establishment
for last three financial years. Also indicate the sources of finance
required to set up building / equipments & tools for the proposed
trade(s). Attach copy of Trust's F.D. or $.B. A/C or Bank
Certificate for knowledge.
4, Layout plan of workshop / class room / Administrative Block ete.
‘Must Approved by Architect).
5. Photographs of site / infrastructure (including workshop / class
room/ administrative block etc.)
6. Original Agreement of rented building. (If rented)
_
Justification of employment opportunity with supporting data for
individual trade proposed to be started by establishment.
8. Any other activity of proposed Training Institute.Section 6
Rules and Regulation to be required followed by Establishment -
Training Centre:
1, Establishment shall recruit number of Supervisor Instructor / Training
personnel according to the norms prescribed by NCVT / GCVT
from time to time possessing necessary experience and qualifications.
2. Establishment will acquire all the machinery, tools, equipment and
furniture as prescribed in the respective trade syllabus before
starting the course,
3. Establishment will select the trainees as per norms laid down by
Government. Establishment shall recruit staff, superviser and monitor
the training programme. But Directorate of Employment & Training
will control and regulate the training programme and in case of any
deviation or deterioration, Director reserves the right to terminate the
concerned trade affiliation or reorganization of Establishment.
4. It will be compulsory on the part of establishment to get the
Provisionally sanction of particular trade in case of NCVT / GCVT
and get duly affiliated within time limit.
5. For GCVT trades, establishment will have to pay affiliation fee of Rs.
25,000/- per batch or as decided by Gujarat Council of Vocational
Training from time to time.
6. Trainees of the affiliated trade will only be permitted to appear in the
Trade Test. 80% attendance is compulsory for the trainee to appear
in the final Trade Test. Establishment's Training Institute will
recommend only the eligible candidates to appear in the final trade
Test.
7. Establishment's Training Institute will maintain necessary records as
specified at Annexure - C or as instructed by DET from time to time.8. Establishment's Training Institute will provide all necessary raw
material of desired quality in adequate quantity to the specified
examination center before conduct of examination.
9, Establishment's Training Institute will collect examination fee as
decided by DET and will deposit it to Gujarat Council of Vocational
Training or any other designated sub ordinate office under the
Directorate.
10. Establishment's Training Institute, at all times, will maintain and
make available all necessary records, return, documents, jobs, test
pieces etc.to the inspecting authority of this Directorate & G.C.V.T.
11. Establishment's Training Institute will send necessary return /
information as and when required by this Directorate / G.C.V.T.
12. Establishment's Training Institute shall be required to maintain the
required number of trade instruments, tools and equipments and these
can not be removed or reduced without explicit permission of
Directorate of Employment & Training, Gandhinagar. In any case,
any instructor resigns or proceeds on leave or remains absent, the
establishment will make necessary arrangement to fill the vacancies
at the earliest and similarly, in case of any break down of machinery or
obsolescence, establishment will make necessary arrangement for
required replacement of such machinery.
13. In case establishment desires to discontinue the sanctioned trades, they
will intimate this Directorate six months in advance of next admission
session.
14. For the sanctioned trade, no grant either recurring or non
recurring admissible. Establishment will not raise any claim for
such grant in future also.
15.Any incomplete application or application without necessary processingfees or late application will not be considered.
16, Selection Criteria for establishing new Self Finance ITCs :
1. Priority will be given to the establishment, who want to introduce
new N.C.V.T. patter trades for which no training facility is
available anywhere in Gujarat.
2. Establishment proposing the trade to be started which is only
covered annexure A & B.
3. Priority will be given to the Centres / Establishment in coastal area,
tribal area, physically handicapped ITCs and women ITCs.
4. Final decision for approval will be taken for Self Finance ITC's by
Government and it will be binding to all the applicants.
Trades, syllabus and all other details are available on web site
www.talimrojgar.org_, www.gevt.org and www.dget.nic.in
(Signature of head of the (Signature of the Trustee/
Institute/eentre) Authorized Signatory of
Designation with stamp: Trust/Society/Public Ltd.
Company with Seal and
Stamp
Date:
Note :-
(1) Address for purchase of NCVT Trade syllabus : M/s. Asian
Publishers, Dariya ganj, Delhi and can be downloaded through
www.dget.nic.in.
(2) Address for purchase of Training Manual : M/s. Tata Macgraw-
Hill Publishing Company Ltd., 4/12, Asaf Ali Road, New Delhi-110002.
(3) G.C.V.T. Trade Syllabus : Can be downloaded through
www.talimrojgar.org , www.gevtorg website & nearest
Government district ITIs.-Note —
(1)As this sanction may given on the fully Self financed basis,
No any grant will be Provided by the Government
(2)Sanction will be given on priority considering the requirement of
skill workers of the trade in the district / taluka of applicant.
(3)Suitable Priority will be given to the sanction of private ITI
sponsored by Industrial Houses.
(4) The institute intensively associated with the local industries will
be considered for given priority.
(5)To start new private ITI, applicant should have sufficient
financial solvency.
(6)After the completion of procedure of sanction from received
applications, remaining applications will be automatically filed
and no further correspondence will be considered in this regards.
Signature of the Trustee/Authorized Signatory
with Seal and StampANNEXURE-C
Records to be maintained by the Institute :
1, Attendance Register for the trainee as prescribed by Director.
2. Attendance Register for the Staff.
3. Copy of the Trade syllabus for all sanction trades / ‘Training Manual
(In case of NCVT Trades.)
4, Trainee bio data register with passport size photo.
5. Details of the training programme. (week wise schedule as per
syllabus)
6. Periodical test record & job evaluation register.
7. superwiser instructor bio data with copy of Certificate of
qualification,
experience & photograph.
8. Training Record like Note book, practical work book, progress report,
etc.
9. Inspection report internal as well as DET office with its compliance
10. Correspondence file.ANNEXURE
AN
NCVT
RADES
SIN] Name of the Trade Duration Entry Qualification
°.
larchitectural Assistant [2 Semesters|Passed class X under 10*2 sysiem with minimum
1 lof 40% independently in Science and
Mathematics
Braughtsman (Civil [4 Semesters|Passed 70th class examinationunder 10*2
2 system of educationwith Science and
Mathematicsor its equivalent.
[Draukhtsinan (Mechanical) [4 Semesters|Passed 10th class examination under! 0+2
3 system ofeducation with Scienceand Mathematics
or its equivalent.
[Domestic Painter [2 Semesters|Passed 10th class examination under
4 10#2system of education with Science
jandMathematics or its equivalent
[4 Semesters |Passed 70th class examination under 102
5 system ofeducation with Science and
Mathematics or its equivalent,
Electronic Mechanic [4 Semesters|Passed 70th class examination under 102
6 system ofeducation with Science and
[Mathematics or itsequivatent.
Fite [4 Semesters|Passed 70th class examination under 102
7 system of educationwith Science and
[Mathematics or its equivalent.
industrial Painter [2 Semesters|Passed 10th class examination under
8 '10+2eystem of education with Science
landMathematics or its equivalent.
Interior Decoration and [2 Semesters|Passed 70th class examination underi0*2
9 |pesigning isystem ofeducation with Science And
[Mathematics or its equivalent.
Lift and Escalator Mechanic (Old|4 Semesters [Passed 10th class examination under 10+2
10 |Neme Lift Mechanic} system of educationwith Science and
Mathematics or its equivalent.
Machinist [4 Semesters] Passed 10th class examination under 10+2
4 |systemof education with Science and
Mathematics or itsequivatent.
(Marine Engine Fitter
|2 Semesters|
Passed 10th class examination under 10*2
2 Isystem ofeducation with Science and
Mathematics or its equivalent
[Marine Fitter |4 Semesters| Passed 10th class examination under 10+2
8 [system of education with Science and
Mathematics or its equivalent.
4, [Mason lBullding Constructor) 2 Semesters|sth class passedunder 10*2 system.
15
Mechanic Diesel Engine Old
ame Mechanic (Diese!
2 Semesters|
Passed 10th class examination under 10°2
system of education with Science and
Mathematics or its equivalent.[Mechanic Mining Machinery
[4 Semesters|Passed 10th class examination under 10+2
16 |system ofeducation with Science and
Mathematics or its equivalent.
117, [Mechanic Motor Vehicle Id Semesters|Passed 10th class examination with maths and
Science.
18
Mechanic (Refrigeration and Air.
(Conditioner
[4 Semesters|Passed 10th class examination under 10*2
|system ofeducation with Science and
Mathematics or its equivalent.
[Mechanic Auto Electrical and
2 Semester
Passed 10th class examination with maths and
*9 [electronics IScience
3p [Painter General |4 Semesters|éth Passed
21 (lumber 2 Semesters| 10th Passed or failed
3p [sheskiMetal Worker [2 Semesters|@th class passed
Survevor Two (Passed Toth class examination under 10*2
23 [Semesters _|system of education with Science and
|(1Year) _|Mathematics or itsequivalent.
Tamer [4 Semesters|Passed 10th class examination under 102
24 system ofeducation with Science and
Mathematics or its equivalent.
pg (WelderOld Name Welder (Gas. [2 Semesiers|Pass 6th Class Examination
[and Electric
pp (Mizeman Passed 6 Class examination
|4 Semesters|
Welder (Fabrication & Fiting) One year _|Pass 8th Class Examination
2 (Two
semesters)
Welder (Structural [One year — |Pass &th Class Examination.
28 (Two
semesters)
welder iPipe) [One year |Pass 8th Class Examination.
29 (Two
|semesters)
Welder {Welding & Inspection) [One year
30 (Two
semesters)
[Computer Hardware & Network|One year [Passed 10th with Science and Maths as subjecs.
31 |Maintenance (Two
semesters)
[architectural Draughtsman [2 Semesters |Passed 10th class examination under
32 10#2system of education with Science and
[Mathematics or tsequivalent.
3p, |Soinouter Operator and [2 Semesters|Passed 10th class examination
Programming Assistant
oq, [Sune Technology Old Name [2 Semesters Passed 10th class Under T0-25ysiem of
Cutting Sew
lexamination
36
Dalrving
[2 Semesters|Passed 10th class Examination[Dental Laboratory Technician
[4 Semesters
[Passed 10th class Examination
38
37 [DeskTop Publishing Operator [2 Semesters|Passed 70th class examination
(Dress Making [2 Semesters |Passed 10Ih class Under 10¥2 System of
38 lexamination
39 |fronkOffice Assistant 2 Semester [Passed 10th class examination
Basic Cosmetology (Old Name |2 Semesters |Passed 10th class Examination
40 [es
Hale and Sein care
1 [isso House Keoning 2 Semesters [Passed 10th Class Examination
gp [Oana Care 2 Semester [Passed 10ih class examination
[Pre/Preparatory School 2 Semester [Passed 10th Class examination
43
Management (Assistant)
Fruit and Vegetable Processor [2 Semesters|Passed 10th Class Examination withScience and
#7 Mathematics
ag [Sealnerany [2 Semesters|Passed 10th class Examination
[Multimedia Animation Special 2 Semesters|Passed 10th class examination
48 effect
Health, Safety and [2 Semesters|a) Passed class 10 Examination b) The minimum
Environment physical requirements are i. Height - 185 cm i
Weight - 52 kg i. Chest - Normal 81 cm -
a Expanded 85 cm iv. A registered MBBS doctor
must certify that the candidateis medically fit to
undertake the course
fice Technology and industrial_|2 Semesters|a. Passed class 12th Exam. Under 102 system
Safety Management of education or its equivalent. b. The minimum
physical requirements are i. Height - 185 cm ii
48 Weight - 62 kg i. Chest - Normal 81 om -
Expanded 85 om iv. A registered MBBS doctor
must certiy that the candidate is medically ft to
undertake the course
go Huan Recourse Beecutive |? Semesters Passed 10th Class Examination
yo [tasting Executive [2 Semestors|Passed 10ih Class Examination
51 (Enanee Beatie 12 Semesters|Passed 10th Class Examination
5 [Tour Guide [2 Semesters|Passed 10ih Class Examination
5g [SaietineHospitainy Assistant [2 Semesters|Passed 10m class examination
[Bamboo Works 2 Montns [ath Pass
54 2
|Semesters)Milk & Milk Products
(One year
[Passed 10th Class Examination with scienceand
55 (Two Imathematics.
semester)
(Aare Processing (One year [Passed TOth Class Examination with scienceand
56 (Two mathematics
lsemester)
Food Beverage [One year — [Passed 70th Class Examination with scieneeand
87 (Two Imathematics.
semesters)
(Data Base System Assistant [One Vear [Passed 12h Standard with Science &Maths
(2
iad lsemesters }
[Software Testing Assistant One Vear( [Passed 72th with Science @Maths
60 2
|semesters)
House Keener [One year (2 [Passed Tin class examination
6 |semesters)
gp [Weather Goods Maker [2 Semester [6th class passed
63 [Footwear Maker [2 Semester [Passed ih class examination
[Surface Omamentation l2 Semester [Passed 10th Class
64 [fechniges{Embroidery\(old
name Embroidery and needle}
65 [Photographer [2 Semester [Passed 10th class examination
9, [beketand Confectioner 2 Semesters |Passed Toth class exemination
Annexure-B
SEN] Name ofthe Trade Duration Entry Qualification
o.
1 [Two Wheeler Repairer Tyear [Passed 8th class under 10+2 System of Education
2 [Amature Motor Rewinding | I year [Passed 7th class under 10+2 System of Education
3. |Men's & Women Garment Lyear [Passed 7" Class Examination under 10+2 System
Making lof Education|
4 |Certificate course in E- Tyear [Passed 12" Class Examination under 1042 System
jcommerce lof Education
5 |Certificate course in web Tyear Passed 12" Class Examination under 10+2 System]
Design lof Education
6 [Certificate course in Tyear [Passed 12 Class Examination under 10+2 System|
Multimedia Technology &
[DTP
lof Education or AICTE Engineering Diploma or
Diploma in Fine Arts7 |Certificate course in lyear — |Passed 12" Class Examination under 10#2 System|
Hardware Techno & Network| lof Education or AICTE Engineering Diploma
| Administration
8 |Certificate course in Tyear {Passed 12" Class Examination under 10+2 System|
Software Programming lof Education
9 [Safety & Security Man lyear {Passed 10" Class Examination under 10+2 System
lof Education
10 [Welder cum Febricater Tyear [Passed 7th class under 10-+2 System of Education
ay fireman T year jPassed 10" Class Examination under 10++2 System
lof Education
12 | Certificate Course in Laboratory] 06 Months [passed 10" Class Examination under 10-2 System|
Assistant (Pathology) lof Education
4g. [Safety & Security Man’ Tyear Passed 10" Class Examination under 10+2 System
lof Education
44, |Flectrical Appliances Repairer 1 year” |Passed 10" Class Examination under 10+2 System|
lof Education
yg [Armature Motor Rewinding Tyear [Passed 7th class under 102 Sysiem of Education
4g [Plambing Assistent Tyear [Passed 8th class under 10+2 System of Education
47 [Mens & Women Garment Makin] I year [Passed 7th class under 102 System of Education
4p | nstormer Winder Tyear Passed 10th class under 10+2 System of
[Education
4g [Cettifcate course in Tyear Passed 10" Class Examination under 10+2 System|
Financial Advertising lof Education or Diploma pass
po | Ceticte course in tool 2year Passed 10th class under 10*2 System of
jtechnology Education
2 [OFset Printer Tyear Passed 10th class under 10*2 System of
[Education
22 [Stenocumeomputeroperator | I year [Passed 10th class under 1042 System of
(English ‘Education (with english)
yg [Stenecumeomouteroperator |" Tyear [Passed 10th class under 10+2 System of
Gujarat Education _(with Gujarati)
34 [Seneca Mechanic 02 Year [Passed 7th Examination under 102 System oF
Education
7g (Fonda Beversess OS months [Passed 10th Class Examination under 10:
System of Education (with English)
[Food Production O6months [Passed 10th Class Examination under 10*2
26 |(Continental/Indian/Panjabi/ System of Education (with English)
|Chainese)
gy [House Keeping and Bakery | 06 months [Passed [Oth Class Examination under 10*2
[System of Education (with English)
3g [Domestic Home Appliances | 07 Year [Passed 10th Class Examination under T
Repairing
[System of Educationye [Pstrument Mechanic Power | 02 Vear | Passed 10th Gass Examination under 1O¥2 System of
plant Education
30 [Eletrclan Powerplant 02 Year | Passed 10th Class Examination under 10+2 System of
lEdueation
[Cerificate Course in Computer | 06 months [Passed 10th Class Examination under 10+2
34 | Teachers Training [system of Education
[Certificate Course in Computer [06 months
ag | Aided Design & Autocad:-2000 Passed 10th Class Examination under 10+2
[system of Education Or I D.C/D.M. Trade or
|a..C.7.. Approved Diploma Engineering
ge [Patemaker Jor Year |Passed 10th Class Examination under 102
system of Education(with meths & science)
iq [Commuter Aided dress making [02 Year |passed 10th Class Examination under 2042
& dress design [system of Education
[Computer Aided quartz watch [03 Year
35. {cum mobile phone mechanic [Passed 20th Class Examination under 1042
System of Education
iMiedical equipment mechanic 01 Year
s Passed 10th Cass Examination under 2042
|system of Education & Pass any one trade of NCVT 71
RMTV/ELECTRONICS MECH./ ELECTRICIAN
37 [teneeranhy Gulati 02 Year [Passed 10th Class Examination under 10#2
[System of Education(with Gujarati)
Cenficate course in machine 02 Vear [assed 20th cass under 10+2 System of Education
38 tool room {with Meths,Science,English)'S0% marks complesory &
for resrreve quata 40%)
lufe Maintenance Mechanic Oivear [Passed 10th ciass under 10+2 System of Education
39
(with Science or 171 Electric pass)(50% marks
|complesory & for resrreve quata 40%)