Professional Documents
Culture Documents
STEP #1 : Mark the Turbine Blade having FIXED PLATE with both ends bent for locking.
The blade does not have FIXING PIECE (also called as STONE) in the blade slot as shown.
STEP #2 : Straighten the bent ends of the Fixed Plate carefully. Use Copper Piece to knock
the Turbine blade out of its root.
(Do not damaged the root of blade or slot on the Rotor)
REBLADING
TurboNed Singapore Pte Ltd MAN NA 57
STEP #4 : Remove FIXING PIECE and knock out the blade using Copper Piece.
STEP #5 : Remove DAMPING PLATE and FIXING PIECE from next blade and knock the
Blade carefully out of its root.