Professional Documents
Culture Documents
Contents
1. APPLICATION .......................................................................... - 1 -
4. MAINTENANCE ....................................................................... - 3 -
1. Application
During drilling process, LB type drilling junk sub is applied mainly for
fishing of shivers and fallen objects such as carbide tooth, drill bit and
increase bit service life, reduce and prevent drill bit from unexpected
damage.
2.1 Construction
- 1 -
Due to the fact that the body O.D. of junk sub is bigger and a
- 2 -
3. Operation Method
3.1 The junk sub should be assembled on the top of the drill bit, flat
3.2 Generally no more special operation, the junk sub can fishing
displacement and flush few minutes, then pull out of the well.
3.3 Pay attention to the mouth of the junk sub to scrape casing shoe
4. Maintenance
4.1 Disassembly
After used, the junk sub should be cleaned with water, and then
4.1.1 For the integral mandrel: clamp the mandrel with the chain
tongs, and clamp the outer barrel with the other chain
tongs, and then rotate with right hand to remove the barrel.
- 3 -
Tianhe Oil Group Huifeng Petroleum Equipment Co., Ltd.
LB type Drilling Junk Sub
Operation & Maintenance Manual
Integral mandrel
a) Clamp the mandrel with the chain tongs, and clamp the
outer barrel with the other chain tongs, and then rotate
clamp the lower sub with the other chain tongs, and
- 4 -
Tianhe Oil Group Huifeng Petroleum Equipment Co., Ltd.
LB type Drilling Junk Sub
Operation & Maintenance Manual
Two-body mandrel
4.2 Assembly
4.2.2 Check all parts carefully, if found the damage, repair it then
4.3 Maintenance
protectors, and properly stored in dry place to avoid dust and rust for
5. Technical Parameters
Lower end
Lower Length Overall
O.D. * upper I.D. Hole size
Model connection * of barrel length
end O.D. mm mm
upper connection mm mm
mm
LB79 79*79 2 3/8REG B*P 19 250 845 88.9~98.4
LB89 89*78 2 3/8REG B*P 19 250 845 108~117.5
LB94 94*79 2 3/8REG B*P 19 250 850 108~117.5
LB102 102*93 2 7/8REG B*P 31.8 250 850 117.5~124
LB114 115*105 3 1/2REG B*P 38.1 250 915 130~149
LB118 118*105 3 1/2REG B*P 38.1 250 875 139.7~149
LB127 127*108 3 1/2REG B*B 38.1 250 850 152.4~162
6. How to order
the details.
- 6 -