Professional Documents
Culture Documents
Forming Station Testing Progress Report Old
Forming Station Testing Progress Report Old
IO/Directional Test
100%
100%
100%
H. 14 Forming Head
Device
Motor
Sensor
Encoder
IO/Directional Test
100%
100%
100%
H. 15 Forming Bin
Device
Motor
IO/Directional Test
30%
Sensor
70%
0%
0%
0%
Valve
H. 18 Distribution
Device
Motor
IO/Directional Test
80%
Sensor
70%
0%
0%
0%
Valve
H. 72 Mat Scale
Device
IO/Directional Test
Sensor
0%
0%
H. 77 Correction Module
Device
Actuators
IO/Directional Test
100%
. 14 Forming Head
Remarks
Cannot run in auto due to people working
Cannot run in auto due to people working
pending full calibration
H. 15 Forming Bin
Remarks
H. 15-M31 Broken Terminal,
Cannot run in auto due to people working (Some Sensors can only be checked in
Auto Mode)
Pending Compressed Air
H. 18 Distribution
Remarks
Cannot run in auto due to people working
Cannot run in auto due to people working (Some Sensors can only be checked in
Auto Mode)
Some pending due to compressed air while some not installed yet (ZRK Scope)
H. 72 Mat Scale
Remarks
Pending due to mechanical working. Moisture measurement not installed (ZRK
Scope), will be done after mechanical works.
7 Correction Module
Remarks
Calliberation Pending