Professional Documents
Culture Documents
Rr212401 Automobile Engineering I
Rr212401 Automobile Engineering I
1
II B.Tech I Semester Regular Examinations, November 2007
AUTOMOBILE ENGINEERING-I
(Automobile Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆
1. (a) Draw the schematic diagram of chasis along with four wheels? Explain the
functions of different components.
(b) Describe the classification of automobile engines based on combustion princi-
ple? Explain salient features. [8+8]
2. (a) Draw P-V and T-S diagrams S.I Engine and explain its working.
(b) Is it feasible to construct a sterling engine. Explain in detail. [8+8]
4. (a) Draw the circuit of Crank, connecting rod and Crank shaft? Explain the
function of different components.
(b) What are the functions of flywheel? Describe its working principle. [8+8]
5. (a) Explain the working of submerged jet compensation device in a modern car-
buretor?
(b) What are different factors influence the carburetion? Explain. [8+8]
6. (a) Classify different fuel delivery systems for petrol engines? Explain.
(b) What are different problems faced by fuel transfer pump? Explain methods
to rectify them. [8+8]
7. (a) Write the differences between mechanical fuel injector and pneumatic fuel
injector.
(b) Discuss the effect of pressure of oil pneumatic in to the combustion chamber.
[8+8]
⋆⋆⋆⋆⋆
1 of 1
Code No: RR212401 Set No. 2
II B.Tech I Semester Regular Examinations, November 2007
AUTOMOBILE ENGINEERING-I
(Automobile Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆
1. (a) Differentiate between front wheel drive engine with rear wheel drive engine ?
(b) How to make use of diesel engine in power generation ? Explain with a simple
layout. [8+8]
2. (a) Draw P-V and T-S diagrams S.I Engine and explain its working.
(b) Is it feasible to construct a sterling engine. Explain in detail. [8+8]
3. Discuss the functional and constructional details of the following components.
(a) Camshaft
(b) Crancshaft
(c) Connecting rod
(d) Cranc casing [16]
4. (a) Why is flywheel necessary in multicylinder engines?
(b) What is valve tappet clearance? Why is it necessary?
(c) Describe a hydraulic valve lifter. [6+6+4]
5. (a) What are the devices used in carburetors as altitude compesation devices?
Explain.
(b) With suitable sketch, explain the starting circuit of a solex carburetor. [8+8]
6. (a) Explain briefly the electronic fuel injection used in modern cars.
(b) What are the merits and demerits of electronic fuel injection system. [8+8]
7. Write short notes on.
(a) Valve action according to the load.
(b) Closing pressure of injection nozzle.
(c) Droplet penetration pressure.
(d) Simple governor used in diesel engine. [4+4+4+4]
8. (a) What are the objectives of lubrication in automobile engines ? explain?
(b) How two stroke engines are lubricated ? Explain with a suitable diagram.
[8+8]
⋆⋆⋆⋆⋆
1 of 1
Code No: RR212401 Set No. 3
II B.Tech I Semester Regular Examinations, November 2007
AUTOMOBILE ENGINEERING-I
(Automobile Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆
2. (a) What is multi cylinder engine? and explain different types of multi cylinder
engines?
(b) Draw the diagram of V- type arrangement of engine and explain its working.
[8+8]
3. Discuss the constructional details of cylinder, cylinder head, and cylinder block and
cylinder liners with suitable figures. [16]
6. (a) Classify different fuel delivery systems for petrol engines? Explain.
(b) What are different problems faced by fuel transfer pump? Explain methods
to rectify them. [8+8]
7. (a) How the injection system affects the cold-starting performance of a diesel
engine
(b) Draw a sketch of pintaux nozzle and discuss its merits? [6+10]
⋆⋆⋆⋆⋆
1 of 1
Code No: RR212401 Set No. 4
II B.Tech I Semester Regular Examinations, November 2007
AUTOMOBILE ENGINEERING-I
(Automobile Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆
1. (a) Discuss the layout of power plant in different types of automotive vehicles.
(b) Name some well known Indian and Foreign manufactures of automobiles.
[10+6]
3. Discuss the constructional details of cylinder, cylinder head, and cylinder block and
cylinder liners with suitable figures. [16]
6. (a) Classify different fuel delivery systems for petrol engines? Explain.
(b) What are different problems faced by fuel transfer pump? Explain methods
to rectify them. [8+8]
⋆⋆⋆⋆⋆
1 of 1