Professional Documents
Culture Documents
SDMCET: Academic Program Handbook General Information Page No
SDMCET: Academic Program Handbook General Information Page No
Transfer of students
3.1 Non-autonomous institution to SDMCET 9
3.2 Branch change & Lateral entry 9
Academic Calendar
Odd Semester – 2010 – 11 10
Detailed Syllabus 13
1
SDMCET: Academic Program Handbook
1) GENERAL INFORMATION
1.1 Vision:
To move forward in Technical Education by setting up a flexible, vigilant and
vibrant system of education and training in order to
a) ensure competitive and contextually relevant educational standards &
quality.
b) contribute on a larger scale technical manpower of high caliber to serve our
Nation and Globe.
c) sensitize qualified youth force to societal needs and demands through
enrichment of skills and human values.
1.2 Mission:
a) To establish and ensure robust, adaptive and sensitive Curricula and Syllabi.
b) To promote caring and interactive Teaching Practices in a rejoicing Learning
Ambience with richly supported by all Modern Educational Tools and
Techniques.
c) To enhance and revitalize RESEARCH CULTURE to establish synergy
between Teaching and Research and make it an ENABLER for progress
and reach out
d) To explore and achieve the participation of Industrial expertise for
connecting classroom content to real life situation.
e) To encourage and promote RESOURCE GENERATION among faculty to
achieve self- reliance for research
f) To strive and manage Industry and Corporate world as players and enablers
for high quality technical education.
g) To pursue intensification of soft skills and personality development through
interplay of achievers of all segments of our Society.
all the important information about the autonomy policies, norms and
procedures of this institution to all our students and other stake holders.
3
SDMCET: Academic Program Handbook
IMPORTANT
MINIMUM ATTENDANCE REQUIRED FOR
Test – 1 Test – 2 Makeup/Improvement Test By the end of semester
50% 60% 70% 85%
5
SDMCET: Academic Program Handbook
2.2 End Semester Examination (ESE) will be conducted for theory courses only at
the end of the semester after completion of course works. The duration of
examination is 3 hours and maximum marks are 100. Attendance to the ESE
exam is mandatory.
2.4 Valuation methodology: Each answer script of ESE is valued by two faculty
members independently and the better score is considered. If the difference in
the score is greater than 10%, one more valuation of the script will be carried
out by a new examiner and this score is considered as final. Revaluation is not
allowed in view of this fair and careful procedure adopted.
6
SDMCET: Academic Program Handbook
2.7 Earned Credits: A student passing a course in any of the grade ‘S’, ‘A’, ‘B’, ‘C’,
‘D’ & ‘E’ earns the credits prescribed for that course.
2.8 Semester Grade Point Average (SGPA) indicates performance level (caliber)
of the student at the end of each semester. It is calculated as follows:
Σ (Course Credit × Grade po int)
SGPA =
Σ Course Credit
[This takes into account all the registered courses and grades including F
obtained by a student in that semester]
2) Kannada Kali
3) Constitution of India & Professional Ethics (CIPE)
4) Environmental Studies (ES)
Even though, these courses carry no credits, passing them is COMPULSARY.
An attendance criterion is applicable. Examinations are conducted and getting
grade ‘PP’ (Meaning Pass) is a must to get the degree.
2.12 Ranking/Distinction is decided by CGPA. Best student has the highest CGPA.
2.13 Summer Term Course (STC): This arrangement is primarily to assist weak
and / or failed students to clear their backlogs. STC is offered during summer
vacation. In this format, duration of the course is reduced to 8 weeks but the
number of contact hours per week is doubled. Examination pattern remains the
same. A minimum of TEN registered candidates is necessary to offer the
course. A student can register for a maximum of 12 credits only.
3) Transfer of students
3.1 The following procedures are adopted for fixing the grade and grade points of
each course that are completed successfully by the student in the non-
autonomous programs:
a) Courses (in non-autonomous program) equivalent to autonomous courses
shall be identified semester wise.
b) Credits are assigned to the above identified theory and practical courses
successfully completed by the student in the VTU (non-autonomous)
examinations shall be same as in the autonomous courses.
c) Grades shall be awarded for the above identified equivalent courses as per
the following table:
Very
Level Outstanding Excellent Good Average Poor Fail
Good
Grade S A B C D E F
Grade points 10 09 08 07 05 04 00
% Marks
obtained in
VTU (non- >= 90 75 to 89 60 to 74 50 to 59 45 to 49 40 to 44 < 40
autonomous)
examination
3.2 Branch Change and Lateral Entry: At the end of the first year, some students
can change their branch provided i) they are top performers with highest CGPA
and ii) a clear vacancy in the change of branch sought exists. Dean (Academic
Program) will notify the details regarding this at the appropriate time. Diploma
passed candidates is allowed to join the degree program at the third semester.
Rules and Regulations for this are as per VTU.
9
SDMCET: Academic Program Handbook
%, %- %. "# ) %+ & 0 1(
*
$ % " % % & 5 7
+ ) * + , - . $# * " * &6 8$
' 1 , & ( 0
, %#$# $$ $% $" $) $* $+ $, * $" & ' 96 3 /(
- $- $. %# %$ %% %" %) + $* & 2 /' !
$+ & ! : ;
. %* %+ %, %- %. "# "$ , "$ & ! 0 1(
$# $ % " ) * + , % $ &< ;
$$ - . $# $$ $% $" $) * ) . & ( (
01 $% $) & 6 8%
$% $* $+ $, $- $. %# %$ + $, & =
%#$#
$" %% %" %) %* %+ %, %- * %$ & ! 0 1(
%% & ' 96 3 /(
%. "# % %) & < 7
$)
$ % " ) * ) ) & ' ! 3(
$% $) & 6 >
$* + , - . $# $$ $% , $, & 2 ! 0
$+ ' 01 $" $) $* $+ $, $- $. + $- & 2 '
%#$# $. %+ & 6 2 1 ? 0
$, %# %$ %% %" %) %* %+ + %# & ( ' 96 3 /(
%* & 6 0
%, %- %. "# "$ * %, . & 0 ? 0
$-
$ % % . &2
$# %" & 0 '
$. " ) * + , - . , $- & !(
7 ! %# & 2 // (
%# $# $$ $% $" $) $* $+ 3333
%#$$ %% & // (=
%$ $, $- $. %# %$ %% %" 3333 %) "# & !/
%% %) %* %+ %, %- %. "# 3333 %) & 0 81
%+ & /!1('
$#. %, & 2
( 1( ' 6 ! ! 0 @6 AB 3 0 3 ? 0 @ A
6 6 8$ 6 8% !/ > 0 / 0 > !/
0 !0 ' *# C +# C ,# C -* C
0 !0 6 ! ! 0 @6 A 0 ? 0 !0 *# %# > "#
! " #
10
SDMCET: Academic Program Handbook
11
SDMCET: Academic Program Handbook
12
SDMCET: Academic Program Handbook
7) Detailed Syllabus
III Semester
MA200 Engineering Mathematics - III (4 - 0 - 0) 4
Books:
1) Kreyszig E. - Advanced Engineering Mathematics, 8th edition, John Wiley & sons,
2003.
2) Potter M C, Jack Goldberg and Aboufadel E F - Advanced Engineering
Mathematics, 3rd edition, Oxford Indian Edition, 2005.
3) Van Valkenburg - Network analysis, 3rd edition, PHI New Delhi, 2000.
4) Lathi B. P - Modern Digital and Analog Communication System, 2nd edition, pp.
29-63.
13
SDMCET: Academic Program Handbook
Books:
1) M.V. Vanvalkenburg - Network Analysis, 3rd edition, PHI/Pearson Education,
1997.
2) Hayt, Kemmerley & Durbin - Engineering Circuit Analysis, 6th edition, TMH, 2002.
3) Roy Choudhary - Networks and Systems, 2nd edtion, New Age International,
2006.
4) Bruce Carlson - Circuits, Thomson Learning, 2002.
14
SDMCET: Academic Program Handbook
1) Diode circuit: Diode as circuit element, piece-wise linear model, clipping circuit,
clamping circuit, full wave rectifier circuit and capacitor filters. 7 Hrs.
2) Transistor biasing and stabilization: Operating point, need for bias and
stability, types of bias circuit, stabilization against variations in Ico, VBE, and , Bias
compensation. 6 Hrs.
3) Transistor Circuits: Graphical analysis of the CE configuration, hybrid model,
analysis of transistor amplifier circuits, emitter follower, Miller’s theorem and its
dual, Frequency response of amplifier, RC coupled amplifier, Hybrid – model.
10 Hrs.
4) Field Effect Transistor: JFET, & its characteristics, FET small signal model,
Amplifier frequency response. , MOSFET and its characteristics. 5 Hrs.
5) Feed Back Amplifiers: Concepts, Characteristics of Feed Back amplifiers,
method of analysis, types, Oscillator principle, Phase shift Oscillators, Resonant
circuits. 5 Hrs.
6) Power amplifiers: Large signal Amplifiers, Second harmonic distortion, Power
amplifiers, Push-Pull, Class A, Class B, class AB operation. 7 Hrs.
7) Op-amps: Emitter coupled amplifier, offset voltages & currents, Ideal op-
amplifiers. Integrator, Differentiator, precision rectifiers, summer, subtractor,
Comparator, Schmitt trigger. 9 Hrs.
8) Timers: 555 timer block diagram, astable, monostable, multi vibrator, ramp
generator. 3 Hrs.
Books:
1) Millman & Halkias - Integrated Electronics, McGraw Hill, 2005.
2) Sudhakar Samuel - Electronics circuits, Sanguine Technical Publishers, 2005.
3) Ramakant Gayakwad - Op-amp & LICs, 4th edition, Eastern economy edition,
2004.
4) Millman & Taub, - Pulse, Digital & Switching Circuit, MacGraw Hill Publications,
1991.
15
SDMCET: Academic Program Handbook
Books:
1) A K Sawhney - Electrical & Electronic Measurements & Instrumentation, 10th
edition, Dhanpat Rai & Sons, 2002.
2) Cooper D & A D Heifrick - Modern Electronic Instrumentation and Measuring
Techniques, PHI, 1998.
3) H. S. Kalsi - Electronic Instrumentation, 2nd edition, TMH, 2004.
4) Golding and Widdies - Electrical Measurements and Measuring Instruments,
Wheelers Edition, 1999.
1) Boolean Algebra and logic gates: Basic definitions, postulates, theorems and
properties of Boolean Algebra, Boolean functions, DNF, CNF, canonical and
standard forms, Additional Boolean operations and gates, Incompletely specified
Boolean functions. NOR and NAND realization, Principle of minimization.
Karnaugh map: one, two, three, four & five variable maps, POS and SOP
simplification, Minimal sums and minimal products, Quine McCluskey method,
Prime implicant chart, Petrick’s method of determining redundant expressions,
16
SDMCET: Academic Program Handbook
table reduction for multiple minimal solutions. Variable entered Karnaugh maps.
12 Hrs.
2) Combinational logic design with MSI components: Combinational circuits,
analysis & synthesis procedures, binary adders, carry look ahead adder,
subtractor and study of IC 7483, decimal adders, comparators, code converters,
decoders, logic design using decoders and demultiplexers, encoders, priority
encoders, multiplexers, logic design using MUX, Study of ICs 74151, 74153 &
74139. Study of decoder/driver IC 7446/7447. 8 Hrs.
3) Flip-Flops and applications: Basic bi-stable element, latches, SR latch, switch
debouncer, Gated SR and D latch, Timing considerations, JK flip-flop, Master
slave JK flip-flop, Race around condition, Edge triggered flip-flops, Direct inputs,
characteristic equations, Flip-Flop conversions. 7 Hrs.
4) Registers and counters: Study of IC 7495/IC 74194, Bidirectional shift registers,
Counters, Binary ripple counters, synchronous counters, register based counters,
ring Counter, switch tail counter with decoding logic, Design of modulo-N
counters using JK, T, D & SR flip-flop. Self correcting counters, Study of 7493
asynchronous counter, IC 7490 mod-10 counter. 8 Hrs.
5) Programmable Logic Devices: Introduction, PROM, PLA, PAL and logic design
using PLDs. 4 Hrs
6) Logic families: Logic level, Integration scale, output switching time, propagation
delay, fan-in and fan-out, TTL logic, wired logic, TTL with totem pole output,
Tristate TTL, Schottky TTL, MOS families, Inverters, NOR and NAND gates,
CMOS inverters, NOR and NAND gates, Performance comparison of logic
families. 6 Hrs.
7) Introduction to synchronous sequential networks: Structure and analysis of
clocked synchronous sequential circuits, Mealy Model and Moore Model,
Introduction to hazards in digital circuits. 6 Hrs.
Books:
1) Donald D. Givone - Digital Principles and design, TMH, 2004.
2) Morris Mano - Digital Circuits & Logic Design, Pearson Education.
3) Malvino Leech - Digital Circuits & Applications, TMH.
4) Yarbrough - Digital Logic Applications and Design, Thomas publishing company,
1997.
17
SDMCET: Academic Program Handbook
3) Adders and subtractors using basic/universal gates. Study of 4-bit binary parallel
adder IC 7483.
4) Code converters. Binary to excess-3 using IC 7483. Excess-3 to Binary, Binary to
Gray and Gray to Binary.
5) Realization of 2 to 4 line decoder, 4 to 2 encoder, priority encoder.
6) BCD to 7-segment decoder/driver using IC 7446/7447.
7) Logic design using multiplexers and de-multiplexers using IC 74153 and IC
74139 respectively. Study of 74151, 8x1 MUX, 74155, 3x8 decoder, 74157
Quadruple 2x1 MUX.
8) Study of flip-flops and implementation using gates and study of IC 7446, IC 7474
9) Study and realization of 3-bit asynchronous up/down counter using IC 7476.
Study of IC 7493 4-bit asynchronous counter.
10) Design and implementation of mod-n (mod-6) counter using IC 7476 or IC
7474.
11) Study and realization of shift registers using IC 7474 SISO, SIPO, PISO, PIPO.
Bidirectional shift register using ICs 7495/ 74194. Shift register based counters
i.e. ring counter and twisted ring counter with decoding logic.
12) Study and design of astable multi-vibrator and ramp generation using timer 555.
13) Study and implementation of one shot circuit using timer 555.
14) Design of the bit magnitude comparator and study of IC 7485 4-bit magnitude
comparator.
1) BJT Emitter follower (Darlington) Calculation of I/p Imp, O/p imp, voltage gain
2) Clipping circuits using diodes
3) Clamping circuits using diodes.
4) Design of Rectifier (full wave) with filter.
5) Operational Amplifier circuits: Summer circuit, Design & frequency response of
non-inverting amplifier.
6) Integrator design.
7) Differentiator design.
8) Schmitt Trigger; Zero crossing detector.
9) Class B Power Amplifier.
10) R C Coupled Amp. Freq. response input & output impedance.
11) Colpitts’ oscillator.
12) RC- phase shift oscillator.
18
SDMCET: Academic Program Handbook
IV Semester
Books:
1) Kreyszig E. - Advanced Engineering Mathematics, 8th edition, John Wiley & sons,
2003.
2) Gupta S C and Kapoor V K - Fundamentals of Mathematical Statistics, 9th edition,
Sultan Chand & Sons, New Delhi, 2002
3) Chapra S C and Canale R P - Numerical methods for Engineers, 5th edition,
TATA McGraw-Hill, 2007.
4) Lipschutz S. and Lipson M. - “Probability” 2nd edition, Schaum’s Outline series,
2005
Books:
1) Simon Haykin and Barry Van Veen - Signals and Systems, 2nd edition, John
Wiley & sons, 2005.
2) Michel J Roberts - Signals and systems: Analysis of signals through linear
systems, Tata McGraw Hill, 2003.
20
SDMCET: Academic Program Handbook
Books:
1) Soni Gupta & Bhatnagar - A Course of Electrical Power, Dhanpatrai and Sons,
1981.
2) C. L. Wadhwa - Electrical Power Systems, Wiley Eastern, 1991.
21
SDMCET: Academic Program Handbook
1) Vector analysis: Scalars and vectors, vector algebra, Dot & cross products,
Cartesian, cylindrical and spherical coordinate system. 4 Hrs.
2) Coulomb’s law and Electric field Intensity: Field due to a continuous volume
Charge distribution, Field of a line charge and of a sheet charge. 4 Hrs.
3) Electric flux density: Gauss’s law and Divergence Electric flux density, Gauss’s
law, some symmetrical charge distributions for differential volume Element,
Divergence, Maxwell’s first equation of electrostatics, ∇ - operator, Divergence
theorem. 6 Hrs.
4) Energy and Potential: Energy expended in a moving point charge in an Electric
field. Concept of potential and potential differences. Potential due to point charge
and system of charges. Potential gradient, energy density in electric field. 6 Hrs.
5) Conductor, dielectrics and capacitance: Current and current density,
continuity of current, metallic conductors, conductor property and boundary
conditions, nature of dielectric materials, Boundary conditions for perfect
dielectric materials, capacitance calculations for different configurations. 6 Hrs.
6) Poisson’s and Laplace’s equations: Poisson’s and Laplace’s equations,
Uniqueness theorem, examples of the solution of Laplace & Poissson equations.
4 Hrs.
7) The steady magnetic field: Biot-Savart Law, Ampere Circuital Law, Curl,
Stokes Theorem, Magnetic Flux and flux density, the scalar and vector
magnetic potentials. 6 Hrs.
8) Magnetic forces: Force on a moving charge, force on a differential current
element, Force between differential current elements, magnetic boundary
conditions. 3 Hrs.
9) Time Varying Fields & Maxwell’s Equations: Faraday’s Law, Displacement
current, Maxwell’s equations in point form and integral form. 3 Hrs.
10) The Uniform Plane wave: Wave propagation in free space, wave propagation
in dielectrics, Poynting Vector and power considerations, propagation in good
conductors, skin effect. Poynting theorem in complex form. Applications of
Poynting theorem. 6 Hrs.
11) Reflection of uniform plane waves: Reflection of uniform plane waves at the
surface of a perfect conductor at normal incidence. Reflection of uniform plane
waves at the surface of a dielectrics at normal incidence, standing wave ratio.
4 Hrs.
22
SDMCET: Academic Program Handbook
Books:
1) William H. Hayt Jr., John A. Buck - Engineering Electro Magnetics, TMH.
2) S. P Seth - Elements of Electro Magnetic Fields, Dhanapath Rai & Co.
3) John Krauss & Daniel A Fleisch - Electromagnetics with Applications, McGraw
Hill.
4) David K. Cheng - Field & Wave Electromagnetics, 2nd edition, Pearson Education
Asia, 1989.
EE253 Microcontrollers (4 – 0 – 0) 4
Books:
1) Muhammad Ali Mazidi, Janice Gillespie Mazidi and Rolling D. Mekinlay - The
8051 Microcontroller and Embedded Systems-using assembly and C, Pearson,
2006.
2) Kenneth J. Ayala - The 8051 Microcontroller Architecture, Programming &
Applicactions, 2nd edition, Thomson Learning, 2005.
3) Predko - Programming and Customizing the 8051 Microcontroller, TMH, 2004.
4) Raj Kamal - Microcontrollers: Architecture, Programming, Interfacing and System
Design, Pearson, 2005.
23
SDMCET: Academic Program Handbook
Books:
1) D. P. Kothari & I.J. Nagrath - Electric Machines, 2nd edition, TMH, 1996.
2) Clayton & Hancock - Performance & Design of D.C Machines, Oxford, 1987.
3) M.G. Say - Performance & Design of A.C Machines, 3rd edition, CBS
Publications, 2002.
4) Ashfaq Hussain - Electric Machines, 2nd edition, Dhanapat Rai &Co., 2005
I. PROGRAMMING:
1) Data Transfer - Block move, Exchange, Sorting, Finding largest element in an
array.
2) Arithmetic Instructions - Addition/subtraction, multiplication and division, square,
Cube – (16 bits Arithmetic operations – bit addressable).
24
SDMCET: Academic Program Handbook
3) Counters.
4) Boolean & Logical Instructions (Bit manipulations)
5) Code conversion: BCD – ASCII; ASCII – Decimal; Decimal - ASCII; HEX -
Decimal and Decimal - HEX
6) Programs using serial port and on-chip timer /counter.
II. INTERFACING:
C programs to interface 8051 chip to Interfacing modules to develop single chip
solutions.
1) Alphanumeric LCD panel and Hex keypad input interface.
2) External ADC and Temperature control interface.
3) Generate different waveforms Sine, Square, Triangular, Ramp etc. using DAC
interface; change the frequency and amplitude.
4) Stepper and DC motor control interface.
25
SDMCET: Academic Program Handbook
MON
TUE
Lunch Break
Tea Break
WED
THU
FRI
SAT
MON
TUE
Lunch Break
Tea Break
WED
THU
FRI
SAT
26
SDMCET: Academic Program Handbook
Notes:
27
SDMCET: Academic Program Handbook
Notes:
28