Professional Documents
Culture Documents
USING GSM
Abstract
The short message system (SMS) of a standard mobile phone can be used for
much more than just exchanging cryptic message. This application finds a humble
mobile working for controlling external equipments. The SMS service provides by the
service providers are comparatively low cost. Hence the system is highly efficient and
low-cost.
We will connect hardware kit i.e. GSM modem and microcontroller to the energy
meter. The main aim of this project is whenever u r recharging with some amount say
example Rs.100/- by doing SMS to the MODEM, the bulb gets automatically ON until
your recharge gets zero. After getting your balance zero your device gets automatically
switched OFF and you will get a message from the MODEM that you have to recharge
your mobile and the process takes place continuously.
Block diagram:
GSM
modem
Energy 8051
meter microcontroller
Hardware Used:
SOFTWARE USED:
1. Keil u-Vision
Keil Software is used provide you with software development tools for 8051 based
microcontrollers. With the Keil tools, you can generate embedded applications for
virtually every 8051 derivative. The supported microcontrollers are listed in the µ-vision.