Professional Documents
Culture Documents
Metric Piping Weight/ Load Calculation Workbook
Metric Piping Weight/ Load Calculation Workbook
Purpose:
This Workbook provides a tool that is intended to provide a quick, easy and accurate method for the piping designer to use when
calculating piping system weights. The workbook can be used to calculate the weight of the pipe, flanges, fittings, insulation and
hydrotest water for a single size or for multi-size configurations.
2 On the correct size sheet, enter quantities in the (Yellow) quantity column. Lineal meters for Pipe and Insulation.
Enter actual count for fittings, flanges and valves.
3 For Hydrotest water add the lineal meters of the pipe plus add in a factor for the fittings and valves.
4 At the bottom of each page there is a note "ADDITIONAL WEIGHT ITEM". This is the place to add in the weight
of items such as Weld-O-Lets or any other previously unlisted items. For record purposes, define the item in the
(Yellow) space allowed. The data from all pages will be automatically posted to the summary table at the bottom
of this page.
5 For record purposes a project number, system or line description, originator and date may be entered at the top
of each size sheet used. The same data may also be entered on this sheet.
6 Do not try to enter data in any other spaces. This Workbook is password protected.
7 For a piping load where the concentrated load is off center between two support points the higher individual load
may be given. Example: where the center of the total calculated load is 85% closer to support point # 1 than #2
then input the decimal (.85) into the "Yellow" box at the bottom of this page. The calculated load for Pipe Support
#1 will be given.
8 After all required data has been entered on a size page a copy should be ran for record purposes when required.
9 When all weight work data for a system or individual line is complete and record copies have been run, close the
file but do not "save" the changes. All previous data will be erased. You may then open the file again for another
line or system.
TOTAL WEIGHT
THIS SHEET 0.00
3 " NPS PROJECT:
0.00
40 / STD WT 50.75
HYDROTEST 80 / XS 48.07
WATER 160 36.61
0.00
1 1/2" CAL SIL 7.59
INSULATION 2" CAL SIL 10.22
3" CAL SIL 16.07
4" CAL SIL 22.62 0.00
40 / STD WT 38.10
90 ELL 80 / XS 50.80
160 107.95
0.00
40 / STD WT 19.23
45 ELL 80 / XS 25.40
160 53.98
0.00
40 / STD WT 47.17
TEE 80 / XS 59.87
160 127.01
0.00
150# RF WN 27.22
300# RF WN 49.90
600# RF WN 102.06
FLANGES 150# RF SO 23.13
300# RF SO 45.36
600# RF SO 96.62
150# RF BLIND 35.38
300# RF BLIND 66.22
600# RF BLIND 121.11 0.00
150# GATE 285.76 0.00
300# GATE 476.27
600# GATE 852.75
150# GLOBE 303.91
VALVES 300# GLOBE 585.13
0.00
STD WT 72.92
HYDROTEST XS 69.94
WATER 160 50.60
0.00
1 1/2" CAL SIL 7.72
INSULATION 2" CAL SIL 11.79
3" CAL SIL 18.30
4" CAL SIL 25.60 0.00
STD WT 55.79
90 ELL XS 73.48
160 180.08
0.00
STD WT 28.12
45 ELL XS 36.74
160 90.26
0.00
STD WT 73.48
TEE XS 84.82
160 194.59
0.00
150# RF WN 39.92
300# RF WN 73.94
600# RF WN 123.38
FLANGES 150# RF SO 32.66
300# RF SO 63.50
600# RF SO 118.39
150# RF BLIND 53.52
300# RF BLIND 94.80
600# RF BLIND 154.68 0.00
150# GATE 376.48
300# GATE 675.85
600# GATE 1192.95
VALVES
0.00
STD WT 88.84
HYDROTEST XS 85.57
WATER 160 63.40
0.00
1 1/2" CAL SIL 8.78
INSULATION 2" CAL SIL 12.35
3" CAL SIL 18.75
4" CAL SIL 22.47 0.00
STD WT 71.67
90 ELL XS 94.35
160 247.66
0.00
STD WT 36.29
45 ELL XS 47.17
160 123.83
0.00
STD WT 102.51
TEE XS 127.01
0.00
150# RF WN 58.97
300# RF WN 98.43
600# RF WN 184.16
FLANGES 150# RF SO 43.54
300# RF SO 88.45
600# RF SO 144.24
150# RF BLIND 64.41
300# RF BLIND 121.11
600# RF BLIND 198.22 0.00
150# GATE 521.63
300# GATE 984.30
600# GATE 1567.16
VALVES
0.00
STD WT 150.60
HYDROTEST XS 146.43
WATER
0.00
1 1/2" CAL SIL 11.01
INSULATION 2" CAL SIL 14.88
3" CAL SIL 23.22
4" CAL SIL 32.29 0.00
STD WT 119.29
90 ELL XS 157.40
0.00
STD WT 59.87
45 ELL XS 78.93
0.00
STD WT 151.05
TEE XS 192.78
0.00
150# RF WN 72.57
300# RF WN 161.03
600# RF WN 295.74
FLANGES 150# RF SO 63.50
300# RF SO 150.14
600# RF SO 259.91
150# RF BLIND 103.87
300# RF BLIND 199.58
600# RF BLIND 345.64 0.00
150# GATE 860.92
300# GATE 1505.47
600# GATE 2730.63
VALVES
0.00
ADDITIONAL WEIGHT ITEM ( DEFINE ) =
TOTAL WEIGHT THIS
SHEET 0.00
20 " NPS PROJECT:
0.00
STD WT 187.51
HYDROTEST XS 182.75
WATER
0.00
1 1/2" CAL SIL 12.13
INSULATION 2" CAL SIL 16.37
3" CAL SIL 25.45
4" CAL SIL 35.12 0.00
STD WT 146.51
90 ELL XS 198.67
0.00
STD WT 73.48
45 ELL XS 103.42
0.00
STD WT 228.61
TEE XS 264.44
0.00
150# RF WN 88.90
300# RF WN 195.50
600# RF WN 367.86
FLANGES 150# RF SO 82.10
300# RF SO 171.46
600# RF SO 332.48
150# RF BLIND 135.17
300# RF BLIND 247.21
600# RF BLIND 442.71 0.00
150# GATE 1010.60
300# GATE 1940.47
600# GATE 3181.95
VALVES
0.00
ADDITIONAL WEIGHT ITEM ( DEFINE ) =
TOTAL WEIGHT THIS
SHEET 0.00
24 " NPS PROJECT:
METRIC PIPING WEIGHT CALCULATION WORKSHEET
DESCRIPTION : ORIGINATOR / DATE
0.00
STD WT 273.52
HYDROTEST XS 268.02
WATER
0.00
1 1/2" CAL SIL 14.36
INSULATION 2" CAL SIL 19.35
3" CAL SIL 29.76
4" CAL SIL 40.92 0.00
STD WT 226.80
90 ELL XS 282.13
0.00
STD WT 114.31
45 ELL XS 141.07
#VALUE!
#VALUE! 0.00
STD WT 347.00
TEE XS 423.66
0.00
150# RF WN 133.81
300# RF WN 286.67
600# RF WN 524.81
FLANGES 150# RF SO 111.13
300# RF SO 261.72
600# RF SO 478.99
150# RF BLIND 202.30
300# RF BLIND 381.47
600# RF BLIND 614.62 0.00
150# GATE 1519.53
300# GATE 3415.10
600# GATE 4245.62
VALVES
0.00
ADDITIONAL WEIGHT ITEM ( DEFINE ) =
TOTAL WEIGHT THIS
SHEET 0.00