Professional Documents
Culture Documents
How To Tie A Tie
How To Tie A Tie
Can you tie a tie? Don't 3. Pu l l t h e w i d e e n d 6. Bring the wide end 2. Bring the wide end
think it is easy. If you don't underneath the down through the knot around and behind the
do it right, it can really tie narrow end and to the in front. narrow end.
you up in knots! Here are right, back through
some knots for you to learn the loop and to the
and add to your knowledge. right again so that the
In case you are just wide end is inside out.
starting out, master one
knot first before you
attempt the others.
THE WINDSOR
KNOT 7. Using both hands, 3. Bring the wide end
tighten the knot up.
1. Extend the wide end carefully and draw it
"W" to about 12 inches up to the collar.
below the narrow end
"N". Cross the wide 4. Bring the wide end
end over the narrow across the front from
end. right to left.
4. Pu l l t h e w i d e e n d
through the loop.
THE HALF
WINDSOR KNOT
2. Bring the wide end up
through the loop 1. Extend the wide end
between the collar and 5. Pull the wide end up "W" to about 12 inches
your tie; then back through the loop below the narrow end
down. again. "N". Cross the wide
5. Bring the wide end
end over the narrow
around front, over the
end.
narrow end from right
to left.
6. Again, bring the wide 3. Pull the loop down and
end up and through tighten.
the loop.
2. Tu r n t h e w i d e e n d
back underneath the 6. Remove your finger
narrow end. and tighten the knot
carefully to the collar
by holding the narrow
4. Take the wide end over
end and sliding the
to the right.
knot up.
7. Bring the wide end
down through the knot
in front.
3. Continue by bringing
the wide end back over
in front of the narrow
end again.