Professional Documents
Culture Documents
Muur LTTHDJ.K DH Fof/K Kwaaaaaaaaaaa, Oa (Kfut Laj (K.K
Muur LTTHDJ.K DH Fof/K Kwaaaaaaaaaaa, Oa (Kfut Laj (K.K
k dh
fof/k;kWaaaaaaaaaaa ,oa
[kfut laj{k.k
Eqkthc mn~nhu fln~nhdh
Lkgk;d [kfut vFkZ’kkL=h
¼vklwpuk½
[kfut vFkZ’kkL= izHkkx]
Hkkjrh; [kku C;wjks] ukxiqj
AADHUNIK SAJJIKARAN
VIDHIYAN AUR KHANIJ
SANRAKSHAN
By
Mujib Uddin Siddiqui
Assistant Mineral Economist (I)
MODERN QUARRY OF MARBLE
GANG SAW SIZED BLOCKS
SIZES & THICKNESS OF SLABS & TILES
For Tiles:
sizes are 2' x 1'. Standard thickness is 10 +/-1 mm.
Tiles are cut in machines which accommodate only small
blocks (khandas) of size just greater than 2' x 1'.
For Slabs:
Blocks of required length and width are cut in
vertical saws. These generally use a 2 meter
diameter disc thus giving slabs up to 2'6" wide and
10 ft. long. Standard thickness is 18 +/- 1.5 mm.
For Wider slabs:
The blocks are cut in a gang saw. Slabs up to 11' x
6' can be obtained.
The standard thickness of gang saw cut slabs is
20+ / 1 mm.
SIZES OF TILES & SLABS