Professional Documents
Culture Documents
Purpose: Configuring ARCHIVELOG Mode
Purpose: Configuring ARCHIVELOG Mode
This document provides a guide to setting up the backup process specific to Oracle
Database Standard Edition One on Dell servers. The following backup process takes
advantage of the new Oracle Database 10g feature; the Flash Recovery Area. The Flash
Recovery Area simplifies the management of Oracle Database and improves the speed of
backup and recovery processes. For a detailed understanding of Oracle Database 10g
backups and Flash Recovery Area, please refer to Oracle Database 10g documentation
set.
There are three main steps to completely set up automatic backups of an Oracle Database
1. Launch the Enterprise Manager Database Console from the Start > Oracle 10g Menu
> Oracle Enterprise Manager 10g Database Control menu option or remotely via a
web browser.
URL: http://<hostname>:5500/em
2. Log in to Enterprise Manager Database Console by opening your browser and
specifying the SYS username and password as SYSDBA. Click Login.
3. In order to properly set up the database to use the Flash Recovery Area click
Administration on your Oracle Database Home page.
NOTE: Archiving will be set to Enabled under the High Availability section of the
Oracle Database Home page if it was configured initially with ARCHIVELOG mode
on.
4. Click All Initialization Parameters.
5. Scroll down to log_archive_dest_1, remove the string value
LOCATION=+DATADG/orcl10g, then click Apply.
6. An Update Message screen appears stating The changes have been made
successfully.
7. Click SPFile.
8. Scroll down to log_archive_dest_1, remove the string value
LOCATION=+DATADG/orcl10g, then click Apply.
9. An Update Message screen appears stating The changes have been made
successfully. Then click Database:orcl10g to take you back to the main EM
interface.
10. In order to determine the amount of physical space available for the Flash Recovery
Area, click +ASM on your Oracle Database Home page.
11.Click Administration and log in specifying the SYS username and password as
SYSDBA. Click Login.
12.Click RECOVERDG. The value for RECOVERDG in the SIZE (MB) column is
the size of the Flash Recovery Area.
NOTE: It is recommended that this formula is used to compute the space to be used for
the Flash Recovery Area:
Flash Recovery Area = RECOVERDG – 5M
13.Click Maintenance on your Oracle Database Home page.
14.Select Configure Recovery Settings in the Backup/Recovery section. You can use
the Configure Recovery Settings page to configure the settings for the recovery
utility, including the Flash Recovery Area.
15.The Configure Recovery Settings page appears. Scroll to the Flash Recovery Area
section. Configure the flash recovery area by entering the following value in the
appropriate fields:
Flash Recovery Area Location: <+RECOVERDG>
Flash Recovery Area Size: <enter the value from Step X here>
16.Scroll up to the top of the window. Click Apply. A message confirming your changes
is displayed.
Configuring Backup Settings and Policies
You can configure a number of settings and policies that determine how backups are
stored, which data is backed up, how backups perform, and how long backups are
retained before being purged from the recovery area. You can also configure features to
improve backup performance.
You can back up the entire contents of your database by performing a whole database
backup. Full backups of all datafiles are created. The results may be stored as image
copies or as backup sets, but in either case the complete contents of all datafiles of the
database are represented in the backup, as well as the control file, archived redo log and
server parameter file. The database can be recovered completely with this set of files.