Professional Documents
Culture Documents
In this chapter of the tutorials various aspects of the tools functions within CimatronE will be discussed.
Hole Attribute
Hole Attribute
The Hole Attributes feature enables adding special hole attributes to faces in the model. This data is important
for example in Drafting, when defining the Table of Holes or Label of Holes features, and in NC documents
when drilling procedures are performed.
Select the Holes Attributes tool from the Tools drop down menu.
The Hole Attributes feature guide is opened, and contains one required step – Select Faces.
Later, we will see how to change colors of the hole attributes through the Preferences.
H6 H7 User 1 User 2
Click OK.
Note that the ignored holes are colored in green, the Accurate Hole type H6 is selected.
Select the two ejector holes as indicated by the arrows in the picture. (These two faces are now excluded
from the Accurate Hole H6 group.)
It is possible to define any color for the Hole Attributes through the Preferences.
Click OK.
Existing figures as well as new created figures are presented with the current color.
We will now examine the attributes of the hole within the Drafting application.
Right-click the sheet feature from the tree. Select the View Creation option.
Select thedocument you have previously saved: Hole Attributes Exercise.elt. Press the Select tab.
¨
Close the Table of Holes dialog.
The Ignore Hole Attribute appears in the Parameter Values column, below all other values. It does not matter
to which face the Ignore Hole Attribute is attached.
The accurate hole attribute is attached to a segment, and presented next to the relevant segment (diameter).