Receivers are modeled as high impedance terminations. Matching involves calculating the value of Rm so that the transmitter sees a load of Z0 at the end of the transmission line, eliminating reflections from branches. The value of Rm must be unique to allow flexibility and guarantee that any driver can receive or transmit. Simulation shows that drivers 1 and 3 perform better than 2 as transmitters due to physical delay differences in the lines.
Receivers are modeled as high impedance terminations. Matching involves calculating the value of Rm so that the transmitter sees a load of Z0 at the end of the transmission line, eliminating reflections from branches. The value of Rm must be unique to allow flexibility and guarantee that any driver can receive or transmit. Simulation shows that drivers 1 and 3 perform better than 2 as transmitters due to physical delay differences in the lines.
Receivers are modeled as high impedance terminations. Matching involves calculating the value of Rm so that the transmitter sees a load of Z0 at the end of the transmission line, eliminating reflections from branches. The value of Rm must be unique to allow flexibility and guarantee that any driver can receive or transmit. Simulation shows that drivers 1 and 3 perform better than 2 as transmitters due to physical delay differences in the lines.
Recei vers are modelled as a high impedence Rl terminations .
Matching consists into
computing the value of Rm such that the trasmitter sees at the end of the trasmission line a LOAD = Z0, deleting the reflections carried by the discontinuity at the node of the three branches. Considering that every driver can be used as a receiver or trasmitter , the value of Rm must be unique , guaranting the flexibility of the network. This procedure is called an Interconnection Junction Point Matching.
In this way we have the same behaviour from all three sides, taking of course into account the different delay of each trasmission line. Actually the response at the output is the result of multiple reflection , with no discontinuity given by the central node. From simulation we can see how the driver 1 and 3 are better than 2 for a trasmitter, this is due the physical delay of the lines.