You are on page 1of 1

CIRCUIT ANALYSIS II LABS

1. Measure the frequency response (magnitude and phase) of a low pass rc


series cct over a frequency range covering at least two decades below and
two decades above the corner frequency. Plot the same on Bode Paper in the
standard Bode Form.

2. Measure the frequency response (magnitude and phase) of a high pass rc


series cct over a frequency range covering at least two decades below and
two decades above the corner frequency. Plot the same on Bode Paper in the
standard Bode Form.

3. Measure and plot the frequency response of a RLC parallel circuit around
the resonance frequency for varying values of R. Determine the bandwidth
and Quality factor in each case and check the validity of “QBW=constant”.

4. Frequency response of RL, RC and RLC circuits using Pspice.

5. For the op amp inv amp, measure and plot the frequency response at unity
gain, and at two higher values of gain.
a. From the data try to deduce a relationship between bandwidth and
gain.

b. Design and test an op amp difference amplifier at given gain.

6. Design an op amp integrator and test it in time domain. Infer a


relationship of RC values with time slope of the output. Measure and plot
the frequency response of the same circuit and correlate with the RC
value. Use a double supply op amp.

7. Design an op amp differentiator and test it in time domain. Infer a


relationship of RC values with the shape of the output. Measure and plot
the frequency response of the same circuit and correlate it with the RC
value. Use a double supply op amp.

8. Implementation of differentiator and Integrator using Op-Amp through


Pspice.(Analysis in both time and frequency domain)

9. Fourier Series Analysis using Pspice. (Square and Triangular waves)

10.To determine Bode plot, step response for transfer functions of given
circuits using Matlab.

11.Generation of a complex (periodic) wave using Matlab, and finding the


Fourier series for it.

12.Skills in plotting graphs using Matlab

13.Butterworth filter design using Matlab

14.Chebyshev filter design using Matlab

15.Design of a bandpass filter using Matlab.

You might also like