Professional Documents
Culture Documents
C4 Mask NBC Operators Manual English
C4 Mask NBC Operators Manual English
OPERATOR'S INSTRUCTIONS
C4 MASK, NBC
NSN 4240-21-906-0613 (EXTRA SMALL)
NSN 4240-21-906-0614 (SMALL)
NSN 4240-21-906-0615 (MEDIUM)
NSN 4240-21-906-0616 (LARGE)
NSN 4240-21-908-1096 GENERIC
(Olive Drab)
(BILINGUAL)
INSTRUCTIONS DE L'OPERATEUR
Canada
C-77-267-000/MB-000
NOTE
Original 0 1993-11-30
Change 1
Change 2
Change 3
Change 4
Change 5
C-77-267-000/MB-000
Title 0
A to D/E 0
i to vii/viii 0
1-1 to 1-11/1-12 0
2-1 to 2-21/2-22 0
3-1 to 3-23/3-24 0
TABLE OF CONTENTS
CONTENTS
PAGE
Purpose 1-2
Description 1-6
Ancillary Equipment 1-10
General 2-2
Mask Fitting and Testing 2-2
Changing the Canister from one Side
to the Other 2-4
STEM-VALVES REPLACEMENT
PROCEDURES 2-12
Removal 2-12
Installation 2-16
NOSECUP BLANKING PLUG
REPLACEMENT/RELOCATING
PROCEDURE 2-16
Removal 2-16
Installation 2-18
C-77-267-000/MB-000
CONTENTS (Cont)
PAGE
IV
C-77-267-000/MB-000
LIST OF FIGURES
VI
C-77-267-000/MB-000
PART1
GENERAL DESCRIPTION
PARTIE 1
DESCRIPTION GENERALE
1-1
C-77-267-000/MB-000
PART1
GENERAL DESCRIPTION
PURPOSE
WARNING
1-2
C-77-267-000/MB-000
1-4
C-77-267-000/MB-000
DESCRIPTION
1-6
C-77-267-000/MB-000
CAUTION
1-8
C-77-267-000/MB-000
ANCILLARY EQUIPMENT
a. Large Pocket.
b. Small Pocket.
c. Underside pocket.
1-10
C-77-267-000/MB-000
PART 2
PARTIE 2
PREPARATIFS D'EMPLOI
2-1
C-77-267-000/MB-000
PART 2
GENERAL
2-2
C-77-267-000/MB-000
2-4
C-77-267-000/MB-000
WARNING
2-6
C-77-267-000/MB-000
GREY
NOSECUP FRESH, DRY AIR
INLET VALVE FLOW SWEEPING
ACROSS THE
EYEPIECES
* BLACK NOSECUP
BLANKING PLUG
SIDE SPEECH
TRANSMITTER
2-8
C-77-267-000/MB-000
NOTE
2-10
C-77-267-000/MB-000
NOTE
STEM-VALVES REPLACEMENT
PROCEDURES
REMOVAL
5. Proceed as follows:
2-12
C-77-267-000/MB-000
STEP 2
NOSECUP GREY
INLET VALVE
STEP1 STEP 3
NOTE
2-14
C-77-267-000/MB-000
INSTALLATION
6. Proceed as follows:
NOTE
REMOVAL
7. Proceed as follows:
2-16
C-77-267-000/MB-000
INSTALLATION
8. Proceed as follows:
• CAUTION •
2-18
C-77-267-000/MB-000
2-20
C-77-267-000/MB-000
PART 3
OPERATING PROCEDURES
PARTIE 3
METHODES D'UTILISATION
3-1
C-77-267-000/MB-000
PART 3
OPERATING PROCEDURES
c. Remove headgear.
3-2
C-77-267-000/MB-000
CAUTION •
3-4
C-77-267-000/MB-000
3-6
C-77-267-000/MB-000
• CAUTION •
3-8
C-77-267-000/MB-000
a. Mask
- headharness: torn or stretched; buckles
damaged.
- facepiece: punctures, tears/cuts (especial
ly in the headharness lug areas and drink
ing assembly).
- plastic components: cracked, chipped, or
broken.
- valves or plug: missing or damaged.
b. Canister
- dents, cracks on plastic canister, holes or
damaged threads.
3-10
C-77-267-000/MB-000
c. Carrier
- tears, split seams.
- broken belt mounting lugs.
- unserviceable closures.
NOTE
3-12
C-77-267-000/MB-000
b. Remove Canister.
NOTE
3-14
C-77-267-000/MB-000
NOTE
3-16
C-77-267-000/MB-000
• CAUTION
10. Allow the Mask to dry, ensure that all the valves
are correctly seated, close the outlet valve cover,
install the Canister and store in the Carrier.
3-18
C-77-267-000/MB-000
3-20
C-77-267-000/MB-000
3-22