Professional Documents
Culture Documents
Trace GC Ultra Spare Parts Catalog
Trace GC Ultra Spare Parts Catalog
T RACE GC Ultra
Gas Chromatograph
Published by Thermo Electron S.p.A., Strada Rivoltana, 20090 Rodano - Milan - Italy
Tel: +39 02 95059373 Fax: +39 02 95059388
Disclaimer
Technical Information contained in this publication is for reference purposes only and is subject to change without notice. Every effort has
been made to supply complete and accurate information; however, Thermo Electron assumes no responsibility and will not be liable for any
errors, omissions, damage, or loss that might result from any use of this manual or the information contained therein (even if this information
is properly followed and problems still arise).
This publication is not part of the Agreement of Sale between Thermo Electron and the purchaser of a TRACE™ GC system. In the event of
any conflict between the provisions of this document and those contained in Thermo Electront’s Terms and Conditions, the provisions of the
Terms and Conditions shall govern.
Reference to System Configurations and Specifications supercede all previous information and are subject to change without notice.
Trademarks
TRACE™ is a trademark of Thermo Electron S.p.A.. Other brand and product names may be trademarks or registered trademarks of their
respective companies.
Contents
Electronics ......................................................................................................................................... 4
Pneumatics......................................................................................................................................... 6
Split/Splitless Injector ....................................................................................................................... 10
Large Volume Splitless Injector ....................................................................................................... 12
Cold On-Column Injector .................................................................................................................. 14
Cold On-Column Injector for TriPlus Autosampler ....................................................................... 16
Purged Packed Column Injector ...................................................................................................... 18
Packed Column Injector.................................................................................................................... 20
Programmed Temperature Vaporizing Injector............................................................................... 22
Flame Ionization Detector (FID)........................................................................................................ 26
Nitrogen Phosphorus Detector (NPD) ............................................................................................. 28
Electron Capture Detector (ECD) ..................................................................................................... 30
Flame Photometric Detector (FPD) .................................................................................................. 32
Photoionization Detector (PID)......................................................................................................... 34
Thermal Conductivity Detector (TCD).............................................................................................. 36
Discharge Pulsed Detector (PDD) .................................................................................................... 38
Detectors Base Bodies...................................................................................................................... 40
Adapters for Packed Columns ......................................................................................................... 42
On-Column Large Sample Volume Injection ................................................................................... 48
Manual Gas Sampling Valve ............................................................................................................. 50
Automatic Gas Sampling Valve ........................................................................................................ 52
Miscellanea......................................................................................................................................... 54
AS 2000 Autosampler........................................................................................................................ 58
HS 2000 Headspace Autosampler.................................................................................................... 62
AI 3000/AS 3000 Autosampler .......................................................................................................... 66
TriPlus Autosampler.......................................................................................................................... 70
Valve Oven.......................................................................................................................................... 78
Ultra Fast Module Option .................................................................................................................. 80
Appendix A
Customer Communication ............................................................................................................... 87
5
6
Table 2-1. Digital Pressure Flow Controller (DPFC 2001 Module) Spare parts
No Description Qty. P/N
1 Flow regulator mod 250 kPa for OC or PKD injector 425 091 36
1 Flow regulator mod 1000 kPa for OC or PKD injector 425 091 41
2 Flow regulator mod 250 kPa for PPKD injector 425 091 37
2 Flow regulator mod 1000 kPa for PPKD injector 425 091 42
3 Flow regulator mod 250 kPa for S/SL and PTV injectors 425 091 35
3 Flow regulator mod 1000 kPa for S/SL and PTV injectors 425 091 40
4 Flow regulator mod ECD only (AA) 425 090 63
5 Flow regulator mod ECD, PID, FPD, FID w/o make-up (AB) 425 090 64
5 Flow regulator mod TCD only (AB-HWD) 425 090 65
6 Flow regulator mod NPD, ECD, PID, FPD, FID w/o make-up (AD) 425 090 67
6 Flow regulator mod ECD, PID, FPD, FID with make-up (AC) 425 090 66
WARNING! In case of DPFC module field replacing on previous TRACE GC, having S/N lower
than 20025126, you must order also the additional upgrading kit P/N 190 502 35.
2 1
1 2
2 8
3
4
14
5
6 10
11 6A 6B 6C 6D 6E 6F 6G
12
7
13
10
4
5 16
11
8
12
13
14
9
15
9A 9B
D
B C
3
2
6 7
8
9
11-12
2
1
1
2
3 6
10 7
8
9
14
4a
5a
12
16
15 Injection
Side
Column
Side
A B C D E F G H I
10
11
5 5
1 2
6 7
8 9 10 11
12 13
Membrane UNISET - compatible with vials P/N 240 700 05 100 313 011 02
Membrane UNISET - compatible with vials P/N 240 700 10 100 313 011 03
P/N 240 700 15 and P/N 240 740 41
2 3
Table 22-7. Merlin Microseal™ High Pressure Valve option spare parts
Description Qty. P/N
Microseal Valve for SSL and PTV inlets systems 405 230 53
Syringe 10 µl, 50 mm needle for injections in SSL inlet - split mode 365 200 60
Syringe 10 µl, 80 mm needle for injections in SSL inlet - splitless mode 365 200 61
Syringe 100 µl for Large Volume injections in PTV inlet 365 200 50
Table 22-7. Merlin Microseal™ High Pressure Valve option spare parts
Syringe 250 µl for Large Volume injections in PTV inlet 365 200 51
Merlin septum cap for the PTV injector P/N 299 022 63 350 010 55
Magnetic caps for Bar Code Reader, assembled with 9 mm caps 386 060 95
and septa, set of 100
Crimp-top magnetic caps for Bar Code Reader, with 11 mm septa 386 061 01
(set of 100)
Labels for bar code reading, set of 1000 387 067 82
Spare Parts
Table 26-5. Print Circuit Boards
Description Qty. P/N
MFS_ID position identification board 1 236 486 40
MFS_XY motor driver board 1 236 486 45
MFS_ZP motor driver board 1 236 486 50
MFS_TC temperature controller board 1 236 486 55
MFS_SY syringe identification 1 236 486 60
MFS_CP main CPU board 1 236 486 65
MFS_FN incubation oven and stirrer board 1 236 486 70
MFS_SU supply unit 1 236 486 75
MFS_HS hs syringe board 1 236 486 80
MFS_PI power interface board 1 236 486 85
MFS_EI external interface board 1 236 486 90
MFS_TI tray indentifier board 1 236 486 95
MFS_CR bar code reader board 1 236 487 00
MFS_TR tray reader board 1
programmed for Washing Station 4 solvents 236 047 06
programmed for Washing Station 2 solvents 236 047 07
programmed for Tray Holders
236 047 08
MFS_OC on-column presence board 1 236 487 10
MFS_OD on-column driver board 1
programmed for Actuator A 236 487 15
programmed for Actuator B 236 487 16
Detector
Base Body
Injector Base
4
5 1
2
6
3
7
7
Detector
Base Body
Injector Base
2
3
5
1
4
UFM-MS Configuration
Injector Base
2 3
UFM Miscellanea
Table 28-4. UFM Miscellanea
Description Qty. P/N
DRH 2000 printed circuit board See Chapter 1
FID 201 printed circuit board See Chapter 1
UFM column cable 230 435 72
Power Module connecting cable 230 435 74
Heating block extension cable 230 434 47
Detector simulation connector 238 450 38
External Power Module 208 060 50
Liner, split 3 mm 2 453 200 31
UFM test mix 338 190 35
UFM Columns
Table 28-5. UFM-FID Columns
Specification Description P/N
UFM 1 (100% Dimethyl Polysiloxane); Non polar, thin film, general UFM C0000 1010 401
5 mt long; 0.1 mm ID; 0.1 µm f.t. purposes
UFM 1 (100% Dimethyl Polysiloxane); Non polar, suitable for UFM C0000 1070 401
5 mt long; 0.32 mm ID; 0.1 µm f.t. SimDist ASTM D-2887
UFM 1 (100% Dimethyl Polysiloxane); Non polar, suitable for UFM C0000 1070 404
5 mt long; 0.32 mm ID; 0.25 µm f.t. ISO 9377-2 (DIN H53) (fused silica column)
UFM M-1 (100% Dimethyl Polysiloxane); Non polar, suitable for ISO UFM C0000 1070 904
5 mt long; 0.32 mm ID; 0.25 µm f.t. 9377-2 (DIN H53) (metal column)
UFM 1 (100% Dimethyl Polysiloxane); Non polar, very thick film, UFM C0000 2070 414
10 mt long; 0.32 mm ID; 3 µm f.t. suitable for ASTM D-3710
UFM 1 (100% Dimethyl Polysiloxane); Non polar, thin film, suitable UFM C0000 0070 401
2.5 mt long; 0.32 mm ID; 0.1 µm f.t. for ASTM D-2887 extended (fused silica column)
to n-C60 (PTV Injector)
UFM M-1 (100% Dimethyl Polysiloxane); Non polar, thin film, suitable UFM C0000 0070 901
2.5 mt long; 0.32 mm ID; 0.1 µm f.t. for ASTM D-2887 extended (metal column)
to n-C60 (PTV Injector)
How To Contact Us
Thermo Electron provides comprehensive technical assistance worldwide and is
dedicated to the quality of our customer relationships and services. Use this list to
contact your local Thermo Electron office or affiliate.
Europe
AUSTRIA BELGIUM
Thermo Electron Austria wissenschaftliche Geräte Interscience SPRL
GmbH Wehlistrasse 27 b, A-1200, Wien Scientific Parc Einstein –Avenue Jean-Etienne Lenoir 2
Tel: 1 33350340 Fax:: 1 333503426 B-1348 Louvain-la-Neuve
Also serving BULGARIA, CROATIA, CZECH REPUBLIC, Tel: 010 450025 Fax:010 453080
HUNGARY, POLAND, RUMANIA SLOVAKIA, SLOVENIA
FINLAND FRANCE
Oy G.W. Berg & Co. AB Thermo Electron France SA
PO Box 12 Hightec Sud 12 Avenue des Tropiques – Z.A. de
Finn 02201 Espoo Courtaboeuf
Tel: (9) 88664600 Fax: (9) 88664699 BP 141 - 91944 Les Ulis Cedex
Tel: (01) 6918 8810 Fax:: (01) 6929 9382
GERMANY GREECE
Thermo Electron Gmbh Rigas Labs
Im Steingrund 4-6 5, Salaminos Str.
63303 Dreieich 546 26 Thessaloniki - Greece
Tel: 0049-6103-408-0 Fax: 0049-6103-408-1111 Tel: (031) 550669/540410 Fax: (031) 550073
IRELAND ITALY
Thermo Electron U.K. Thermo Electron S.p.A.
19 Trentham Lake South Strada Rivoltana
Imex Technology Park, Trentham 20090 Rodano (Milan)
ST4 8JF, Stoke on Trent, STAFF Tel: (02) 95059226 Fax: (02) 95059256
Tel: (1782) 645136 Fax: (1782) 645121
NETHERLANDS NORWAY
Interscience B.V. IT Instrument Teknikk
Tinstraat 16, Postbus 2148, 4800 CC Breda Skandinavia A/S – PO Box 14
Tel: (076) 5411800 Fax: (076) 5420088 Grins Naeringspark 1 N-1345 Østerås
Tel: (67) 149303 Fax: (67) 149302
PORTUGAL SPAIN
Unicam Sistemas Analiticos, Lda. Thermo Electron – Thermo Instruments S.A.
Estrada da Rocha, 2-A-Sala C Avenida Valdelaparra 27
2799-508 Linda A Velha Edifico Alcor – 2a Planta
Tel: (21) 4153740 Fax: (21) 414 2006 28108 Alcobendas – Madrid
Tel: (91) 6574930 Fax: (91) 6574937
SWEDEN SWITZERLAND
Thermo Electron AB - Sweden Brechbühler AG
Pyramidbacken 3 Steinviesenstrasse 3, CH 8952 Schlieren
SE 14175 Kugens Kurva Tel: (01) 732 3131 Fax: (01) 730 6141
Tel: (8) 55646800 Fax: (8) 55646808
Please help us improve the quality of our documentation by completing and returning this survey.
Circle one number for each of the statements below.
Strongly Strongly
Agree Agree Neutral Disagree Disagree
If you would like to make additional comments, please do. (Attach additional sheets if necessary.)
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Fax or mail this form to:
Thermo Electron S.p.A.
Strada Rivoltana km 4
20090 Rodano (MI)
ITALY
Fax: 39 02 95059388