Professional Documents
Culture Documents
Registration (Students)
a. Windows XP
b. Windows Vista
a. Windows XP
b. Windows Vista
c. Macintosh
d. Linux
(If you face any problem, please email your Matric Number / Staff Number, Phone Number and your MAC
Address to wireless@iiu.edu.my)
Registration Procedure (Step 1-6)
IMPORTANT!!!
Before you read the manual, Make sure you have internet
connection. Please go to any Computer Lab / Cyber café /
anyone that has internet connection to get access.
1. You can also get Wireless MAC Address Tool software at this link
http://itdportal.iiu.edu.my/advise/getwifimac.exe
00 – 1F – 12 – 34 – 56 – 78
5. Please write down your MAC Address and keep it in a safe place for the registration purpose.
00 – 1F – 12 – 34 – 56 – 78
IMPORTANT!!!
1. Open your internet browser (Internet Explorer, Mozilla Firefox and etc)
2. Log on to http://my.iiu.edu.my
3. Make sure you activate your account before registration. Click at the “Activate” button.
Click “Activate” to
active account
4. Then, choose your community group. Choose “UG/PG Student” for students.
Click Activate
Check Activate
7. FOR SENIOR STUDENT, please click “Update” button.
Click Update
8. Close the account activation by clicking “Close” button at the top side. Click Close
Step 1:
After you close the Activate menu, MyIIUM homepage will appear again. At MyIIUM Login, please
click at “MyIIUM Student”
Click here
Step 2:
Enter your matric number at “MyIIUM ID” and “Password” as your pin number. Then click “Login”
Step 3:
Then, click at “My Personal”
Click here
Step 4:
At the left side of your screen, click “Contact Information”
Click here
Step 5:
Please COPY your student Email Address (Student Email). Do not close this Student Portal yet.
here
Step 6:
Open a new page of internet browser (Internet Explorer, Mozilla Firefox and etc)
Step 7:
Go to www.mail.live.com . Fill in “Windows Live ID” as your Email Address (Student Email) and
“Password” as your I/C number (local student) OR Passport Number (international student)
Step 9:
Step 10
Important Section! Please choose one
question. Make sure you remember
this.
Step 13
Step 14
Please click “Sign in to
Windows Live”
Step 15
This page will appear after you click “Sign in to Windows Live”.
Step 16
Click here to proceed for the next step.
4. New IIUM Wireless Registration
Click here
6. After you click at the mail.live.com link, Windows Live page will show your current mail account.
Please click at student webmail account.
Please click at
your account
7. Enter your NEW PASSWORD and click “Sign in”
8. Click “Continue”
Click “Continue”
9. Check your “Inbox” mail. But sometimes, the mail might be located at “Junk” mailbox. You will
receive an email from wireless@iiu.edu.my . Then, open the mail.
Click “Inbox”
10. Read the mail given. Please click the following link to complete the registration process. We are also
provided the Wireless MAC Address Tool to check what your MAC address is.
12. Thick the box as you understands and agrees for the rules and regulations. Then, click “Next”
button.
Then, click
Thick this box Next” button
13. Take out your MAC address that you have copied from command prompt. Write down your Phone
Number and MAC Address. Then, click “Register” button
Fill in your
Phone Number
2) Then, click
“Register” button
14. After the process is complete, LDAP Information will show your status. After that, click the following
link. Please download Wireless Setup Tools (iiumwifiinstaller.exe) at the following link.
Then, click
“link” button
00 – 1F – 12 – 34 – 56 – 78
Right-Click
Click here
Click here
4. After that, right-click at the “Wireless Network Connection”
Click here
5. Click “Properties”
Click here
6. “Wireless Network Connection Properties” will appear. Click at “Internet Protocol Version 4
(TCP/IPv4)”. Then click “Properties”
1) Click here
2) Then click
Properties
7. Check the “Internet Protocol Version 4 (TCP/IPv4) Properties”. Make sure “Obtain an IP address
automatically” and “Obtain DNS server address automatically” are selected
8. After all settings have been correctly checked; click “OK” then “OK” again for all properties.
9. Go to the “Network and Sharing Centre” again. Then click “Manage wireless network”.
Click here
10. Please “Remove” any wireless network in the box below. Make sure you leave it empty. If you have
any manual setting for wireless network, please remove “iium-community”
11. You need to download the Wireless Setup software at
http://itdportal.iiu.edu.my/advise/iiumwifiinstaller.exe
12. After downloaded the “iiumwifiinstaller.exe”, save in your LAPTOP (e.g.: save
in your My Document).
13. Please double-click IN YOUR LAPTOP and follow the next procedure.
Click here
Click OK
Click OK
19. Choose “I accept the terms in the licence agreement”. Then click “Next”.
20. Wait for the installation. After the installation, click “Finish”.
Click Finish
Click Yes
22. After your computer is turning ON, wait until network pop-up menu appear. If the pop-up menu
not appears, turn OFF your wireless device and then turn it ON again. Please CLICK on the pop-up
menu to enter credentials
------------------------------------------------------------END OF PAGE----------------------------------------------------------------
6. How to Download / Install / Configure IIUM Wireless Setup (Windows XP)
Check this icon in your laptop. Did you see this icon on your taskbar?
OR
YES NO YES NO
Disable Intel PRO Set Wireless Management
1. Right click your Intel PROSet/Wireless icon (green color)
Right- click here
Click here
Click YES
3. Tick the following box and click "Yes"
Click here
1. Click “START”
2. Go to “Connect to…”
Click Connect to…
Click “Properties”
5. Click at “Wireless Network” Tab. Make sure you remove all Preferred network by click Remove
Then, click OK
6. Please download the Wireless Setup software at
http://itdportal.iiu.edu.my/advise/iiumwifiinstaller.exe
9. Click “OK”
Click OK
Click Next
14. Choose “I accept the terms in the licence agreement”. Then click “Next”.
Click here
Click Next
15. Wait for the installation. After the installation, click “Finish”.
Click Finish
Click Yes
17. After your computer is turning ON, wait until network pop-up menu appear. If the pop-up menu not
appears, turn OFF your wireless device and then turn it ON again. Please CLICK on the pop-up menu to
enter credentials.
------------------------------------------------------------END OF PAGE----------------------------------------------------------------
Register via Email
Step 1
Please submit your application through email. Users are required to perform self configuration base on
our manual guidelines.
FOR EXAMPLE:
Content
Name: Abdel Razzaq
Matric No: G0812020
Email: G0812020@stud.iiu.edu.my
Phone No: 0172342020
Step 2
Please re-check your email within 24 hours (if you send during office hour) and you will get an email
from IIUM Wireless Email.
Step 3
Click here for wireless setup.
Troubleshooting (Windows XP)
1. Click “START”
2. Go to “Connect to…”
Click Connect to…
Click “Properties”
5. Click at “Wireless Network” Tab. Make sure you remove all Preferred network by click Remove
c) Choose iium-community
(If iium-community is not
exist, please install
iiumwifiinstaller.exe)
d) Click “Properties”
6. Go to “Association” tab and follow as below.
a) Click Association
Tab
c) Choose “WPA”
b) Tick this box
d) Choose “TKIP”
d) Choose “Protected
a) Click EAP (PEAP)”
Authentication Tab
b) Choose “EAP
Token”
d) Click “OK”
9. Wait until network pop-up menu appear. If the pop-up menu not appears, turn OFF your wireless
device and then turn it ON again. Please CLICK on the pop-up menu to enter credentials.
If you face any problem, please email your Matric Number, Phone Number and your MAC Address to
wireless@iiu.edu.my
------------------------------------------------------------END OF PAGE----------------------------------------------------------------
Troubleshooting (Windows Vista)
Right-Click
Click here
Click here
4. After that, right-click at the “Wireless Network Connection”
Click here
5. Click “Properties”
Click here
6. “Wireless Network Connection Properties” will appear. Click at “Internet Protocol Version 4
(TCP/IPv4)”. Then click “Properties”
1) Click here
2) Then click
Properties
7. Check the “Internet Protocol Version 4 (TCP/IPv4) Properties”. Make sure “Obtain an IP address
automatically” and “Obtain DNS server address automatically” are selected
8. After all settings have been correctly checked; click “OK” then “OK” again for all properties.
9. Go to the “Network and Sharing Centre” again. Then click “Manage wireless network”.
Click here
10. Please “Remove” any wireless network in the box below. Make sure you leave it empty. If you have
any manual setting for wireless network, please remove “iium-community”
11. Then, click “Add”…
Click “Add”
a) Type iium-
community
b) Choose “WPA-
Enterprice”
c) Choose “TKIP”
d) Tick this
box
e) Click “Next”
Click “Change
connection settings”
15. Follow as instructed.
b) Click Protected
EAP (PEAP)
d) Click “Settings…”
c) Tick this box
x
x
f) Choose “EAP
Token”
x
g) Tick this box
h) Click “OK”
x
16. Wait until network pop-up menu appear. If the pop-up menu not appears, turn OFF your wireless
device and then turn it ON again. Please CLICK on the pop-up menu to enter credentials
If you still face a problem, please email your Matric Number, Phone Number and your MAC Address to
wireless@iiu.edu.my
------------------------------------------------------------END OF PAGE----------------------------------------------------------------
Frequent Asked Question
The IIUM Campus Wide Wireless Network maximum can operate at 54Mbps with IEEE 802.11a or IEEE
802.11g standard. Technologically, it is a shared access medium. This means it depends on how many
users are connected to the wireless access point. If there are many people connected to the wireless
access point, the slower the connection will become. Besides that, the encryption transmission (WPA)
will also affect the wireless speed, but this is important for wireless security purpose.
For Staff
username: email username
password: email password
For student
username: matric number
password: pin number
d) PC Minimum Requirement
System hardware
PC or notebook support wireless
Wireless LAN IEEE 802.11b/g Adapter (Wi-Fi compatible)-PCMCIA, USB or built in (Centrino, etc).
Handheld, Pocket PC, Palm support wireless
System Software
One of the following:
Additional Software
Microsoft Internet Explorer 6.0 with Service Pack 2
Netscape navigator 4.75
Any Browsers.
g) What to do when Windows Vista shows limited connection OR connected with limited access?
Windows Vista Wi-FI security was designed with two type of WPA which is personnel and enterprise.
While the other operating system just simply WPA only.
When you are connected but limited access, shutdown your laptop for a few minute and restart
again.
Enter again your credential info if required
Windows Vista not recommended by IIUM Wi-Fi admin - use at your own risk
The best way is to use normal Windows XP, Macintosh (MacBook) or Ubuntu 8.04
h) Why the registration setup is complicated and it is not as easy as at any public Wi-Fi such as Starbuck,
Secret Recipe, Coffee Bean or Kotiam Cafe?
The registration setup is complicated just because to ensure that all traffic travel in the air is
encrypted and secured. Public Wi-Fi does not have security features and it is open to risk. What
ever you send can be simply sniffed by unauthorized hacker. IIUM Wi-Fi offers guaranteed secure
connection and all information are encrypted. Secure environment setup is known to be a quit
complicated to non-IT savvy users.
WEP key can be cracked less then 5 minutes. WPA setting is quit secure enough. WPA2 has strong
security features and more complicated to setup compared to WPA setting. In average, not many
devices own by IIUM Community supported WPA2. ITD will enhance its security using WPA2 in the
future.